Shop By Product Matching "TT"
Choose your Engine for your 2021 GMC Yukon
Image
Product
Price
- Weight Capacity 7000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 7000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2021 - GMC Yukon | Rear |
- NGK Laser Iridium Spark Plug
- Gap 0.040" OE Equivalent Design 96,000 mi Factory Recommended Service Interval
- Laser Iridium Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.14
- 3.5
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Iltr5e11
- Ground Electrode Tip Material: Platinum
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Iltr5e11
- Resistor Type: Yes
- Stock Number: 91418
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.984
- 25.0
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
- NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
12625058, 41-103, 41-114, 4513, 4718, 91418, 9901, 9901S, ITV16TT, PTV16TT, RE10WYPB5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - GMC Yukon | V | 5328 | 8 Cyl 5.3L | 325 |
- Autolite AI6043 Iridium Ultra Spark Plug
- Gap .040 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Long Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.19
- 4.83
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.226
- 5.74
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.045
- 1.14
- Resistance: 4000
- Insulator Height:
- 2.218
- 56.34
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12622441, 41-114, 5350, 96307, 96326, 9777, CYFS13YRC, ILTR5B11, ILZTR6A8G, ITL20, ITV16, ITV16TT
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2021 - GMC Yukon | V | 6162 | GAS | 8 Cyl 6.2L | 376 |
- Autolite XP6043 Iridium XP Spark Plug
- Gap .040 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Long Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.19
- 4.83
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.226
- 5.74
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.045
- 1.14
- Resistance: 4000
- Insulator Height:
- 2.218
- 56.34
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12622441, 41-114, 4344, 5350, 96307, CYFS13YRC, HR9SII330X, HR9SPP300X, ILTR5B11, ILZTR6A8G, ITL20, ITV16, ITV16TT, LTR5IX-11, SP149212AC
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2021 - GMC Yukon | V | 6162 | GAS | 8 Cyl 6.2L | 376 |
- NGK Iridium IX Spark Plug
- Gap 0.040"
- Iridium IX Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.14
- 3.5
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Ltr5ix-11
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ltr5ix-11
- Resistor Type: Yes
- Stock Number: 4344
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- .044
- 1.1
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.984
- 25.0
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
- RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
- TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode's durability is six times harder than platinum. Iridium alloy's extremely high melting point is perfect for today's engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
17, 4344, 4488, 4718, 5338, 5341, 92067204, 9611, HR8MII33X, ITV16, ITV16TT, ITV24, XP5363, XP5364, XP5364DP2, XP6043
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - GMC Yukon | V | 5328 | 8 Cyl 5.3L | 325 |
- NGK G-Power Platinum Spark Plug
- Gap 0.040"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Ltr5gp
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ltr5gp
- Resistor Type: Yes
- Stock Number: 5019
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.984
- 25.0
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
3032, 3032-2, 3132, 4513, 4718, 5019, 6716, 6727, 6728, AP5263, AP5263DP2, AP5364, AYFS22FM, HR7MPP30X, HR8MPP30X, HR8NPP302X, ITV16TT, PTV16TT...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2021 - GMC Yukon | V | 5328 | 8 Cyl 5.3L | 325 |
- Nerf Step-W2W (2 Stps)-15-19 Tahoe/Yukon-TX Blk
- Textured Black; Special Order
- Nerf Step Bar-Wheel-to-Wheel (2 Steps per Side)-2015-2019 Chevy Tahoe/GMC Yukon-Textured Black-Special Order
- Wheel To Wheel Nerf Step Bar
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Main Bar Is Built High And Tight To Hide Frame
- Patented Nerf Step Design
- Provides Added Protection From Road Debris
- Solid 1Pc Non Modular Design For Easy Installation
- Tube Is Treated For Corrosion Inside And Out
- Welded Step Pads Will Not Crack Or Break
- Limited Lifetime Warranty
- One of N-FAB's most popular styles is the Wheel to Wheel Nerf-Step. Utilizing N-FAB's patented hoop step design and innovative mounting system, N-FAB Wheel to Wheel Nerf Steps work on vehicles with and without body lift kits, with no modifications to brackets or bars. All N-FAB Wheel to Wheel Nerf Steps are built using .084 wall steel tubing and offer an industry high load rating of 465 pounds. All N-FAB Wheel to Wheel Nerf Steps are constructed as one-piece assemblies to provide maximum strength and durability not found in modular designs. Wheel to Wheel Nerf-Steps are designed and built specifically for each application, and mount high and tight to the vehicle cab for a clean factory look.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - GMC Yukon |
- Nerf Step-W2W (2 Stps)-15-19 Tahoe/Yukon-TX Blk
- Textured Black; Special Order
- Nerf Step Bar-Wheel-to-Wheel (2 Steps per Side)-2015-2019 Chevy Tahoe/GMC Yukon-Textured Black-Special Order
- Wheel To Wheel Nerf Step Bar
- Product Attributes:
- WARNING CA Proposition 65 Message:
- Cancer And Reproductive
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- WARNING CA Proposition 65 Message:
-
Features:
- Main Bar Is Built High And Tight To Hide Frame
- Patented Nerf Step Design
- Provides Added Protection From Road Debris
- Solid 1Pc Non Modular Design For Easy Installation
- Tube Is Treated For Corrosion Inside And Out
- Welded Step Pads Will Not Crack Or Break
- Limited Lifetime Warranty
- One of N-FAB's most popular styles is the Wheel to Wheel Nerf-Step. Utilizing N-FAB's patented hoop step design and innovative mounting system, N-FAB Wheel to Wheel Nerf Steps work on vehicles with and without body lift kits, with no modifications to brackets or bars. All N-FAB Wheel to Wheel Nerf Steps are built using .084 wall steel tubing and offer an industry high load rating of 465 pounds. All N-FAB Wheel to Wheel Nerf Steps are constructed as one-piece assemblies to provide maximum strength and durability not found in modular designs. Wheel to Wheel Nerf-Steps are designed and built specifically for each application, and mount high and tight to the vehicle cab for a clean factory look.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - GMC Yukon |
Showing 1 - 8 of 8 products
Loading...