Image
Product
Price
- QuadTrac
- Transfer Case Fluid; QuadTrac;
- Transfer Case Fluid
-
Features:
- Transfer Case Fluid
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1979 - Jeep J10 |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG 280 Greaseable Super Strength Universal Joint for Jeep Grand Cherokee
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27
- Grade Type: Premium
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
10153, 10153BF, 10153G, 1143HD, 1143HP, 114513, 114513R, 114513X, 114521HD, 153, 15617322, 20049, 20049P, 20208, 20335, 2100153, 2120153, 2150153...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1979 - Jeep J10 | Front Driveshaft - CV at Transfer Case | 4WD |
- Non-Greaseable Super Strength Universal Joint
- Non-Greasable Super Strength U-Joint
- MOOG 269 Non-Greaseable Super Strength Universal Joint for Jeep Grand Cherokee
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- U-Joint Identification: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27
- Grade Type: Premium
- Length Axis 1:
- 3.22
- 81.788
- Length Axis 2:
- 3.22
- 81.788
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27
- Greaseable: No
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0153BF, 10153, 10153BF, 10153G, 1143HD, 1143HP, 114513, 114513R, 114513X, 114521HD, 153, 15617322, 20049, 20049P, 20208, 20335, 2100153, 2120153...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1979 - Jeep J10 | Front Driveshaft - CV at Transfer Case | 4WD |
- w/Quadra-Trac Transfer Case
- Transfer Case Switch;
- Transfer Case Switch
-
Features:
- Transfer Case Switch
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1979 - Jeep J10 |
- Transfer Case Stabilizer Bushing;
- Transfer Case Stabilizer Bushing
-
Features:
- Transfer Case Stabilizer Bushing
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1979 - Jeep J10 |
- Varies With Application; Closed Seal
- Transfer Case Output Shaft Seal; Varies With Application; Closed Seal;
- Transfer Case Output Shaft Seal
-
Features:
- Transfer Case Output Shaft Seal
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1979 - Jeep J10 |
- Transfer Case Stabilizer Stud;
- Transfer Case Stabilizer Stud
-
Features:
- Transfer Case Stabilizer Stud
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Transmission |
|---|---|
| 1979 - Jeep J10 | Manual |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1979 - Jeep J10 | Front Driveshaft - CV at Transfer Case |
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1979 - Jeep J10 | Front Driveshaft - CV at Transfer Case |
- Greaseable Premium Universal Joint
- Premium with Lube Fitting in Bearing Cup
- MOOG 380 Greaseable Premium Universal Joint for Jeep Grand Cherokee
- Product Attributes:
- Bearing Cap Type: 4 Plain Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27
- Grade Type: Premium
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Plain Round Bearings
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Part Description: Universal Joint
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
0437104044, 1-0154, 10154, 20049E, 210-0433, 2100433, 2130433, 2180153, 28153X1A, 433-1, 4331, 45U0170, 495, 5-433-1X, 54331X, DT4331, G5-433X, G5433X...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1979 - Jeep J10 | Front Driveshaft - CV at Transfer Case | 4WD |
Showing 1 - 10 of 19 products
Loading...