Shop By Product Matching "Transmission"
Choose your Engine for your 1964 Ford P-350
Image
Product
Price
- with 2 Piece Rear Drive Shaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter 2 Piece Driveshaft Greaseable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1964 - Ford P-350 | Rear Driveshaft at Transmission |
- Universal Joint
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter 2 Piece Driveshaft Greaseable with 2 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1964 - Ford P-350 | Rear Driveshaft at Transmission | RWD |
- Universal Joint
- with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter 2 Piece Driveshaft Non-Greasable with 2 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.219
- Snap Ring (2): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1964 - Ford P-350 | Rear Driveshaft at Transmission | RWD |
- with 2 Piece Rear Drive Shaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter 2 Piece Driveshaft Non-Greasable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1964 - Ford P-350 | Rear Driveshaft at Transmission |
- w/Aluminum Carrier; Rubber Coated Sealing; No Requires Silicone Fits Ford C4
- Automatic Transmission Oil Pan Gasket; w/Aluminum Carrier; Rubber Coated Sealing; No Requires Silicone;
- Automatic Transmission Oil Pan Gasket
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Excellent Torque Retention Prevent Possible Leaks
- Positive Seal Under Severe Temperatures/Conditions
- Silicone Elastomer Beading Provides Un-Matched Gasket Strength
- Aluminum Carrier Provides Un-Matched Gasket Strength
- Premium Transmission Pan Gaskets Have You Covered
- Mr. Gasket Transmission Oil Pan Gaskets offer simple, no silicone installation. They use an aluminum carrier, silicone elastomer beading and a rubber coated binder to create a strong, long lasting seal perfect for the demands of high fluid temperatures created in transmissions. Whether you are sitting in heavy traffic, racing, off-roading or just want a clean garage floor, these premium transmission pan gaskets from Mr. Gasket have you covered.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Ford P-350 | V | 4786 | 8 Cyl 4.8L | 292 |
- U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish
- Hi-Tech Kickdown Kit; U-Cut-To-Fit; Includes Aluminum Fittings w/Ferrule/Instructions; Stainless Steel Housing; Stainless Steel Finish;
- Hi-Tech Kickdown Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Trans Model: Ford- C- 4 (auto) 3 Speed
-
Features:
- U-Cut-To-Fit Design Works In Any Application
- Specially Extruded Liner For Extended Cable Life
- Aluminum Ferrule To Eliminate Fraying
- Complete Instruction Kit Included
- Made In The U.S.A.
- Lifetime Warranty
- Lokars U-Cut-to-Fit Kickdown Cables are available in either stainless steel braided housing, black stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our kickdown with our Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit. Polished kickdown cables will include polished aluminum fittings. Black Hi-Tech stainless cables will include black anodized aluminum fittings.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1964 - Ford P-350 | L | 3655 | 6 Cyl 3.6L | C4 | 223 |
- Automatic Transmission Oil Pan Gasket
- w/Aluminum Carrier; Rubber Coated Sealing; No Requires Silicone Fits Ford C4
- Automatic Transmission Oil Pan Gasket; w/Aluminum Carrier; Rubber Coated Sealing; No Requires Silicone;
- Transmission Pan Gasket
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Excellent Torque Retention Prevent Possible Leaks
- Positive Seal Under Severe Temperatures/Conditions
- Silicone Elastomer Beading Provides Un-Matched Gasket Strength
- Aluminum Carrier Provides Un-Matched Gasket Strength
- Premium Transmission Pan Gaskets Have You Covered
- Mr. Gasket Transmission Oil Pan Gaskets offer simple, no silicone installation. They use an aluminum carrier, silicone elastomer beading and a rubber coated binder to create a strong, long lasting seal perfect for the demands of high fluid temperatures created in transmissions. Whether you are sitting in heavy traffic, racing, off-roading or just want a clean garage floor, these premium transmission pan gaskets from Mr. Gasket have you covered.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - Ford P-350 | V | 4786 | 8 Cyl 4.8L | 292 |
- StarShifter Automatic Shifter
- For GM TH400,350,250,200 Ford C4 and C6, Mopar 727 and 904
- StarShifter Automatic Shifter; Detent Ratchet Combo 3-Speed; Floor; Fits w/TH400/TH350/250/200/C4/C5/C6/AOD/1966 And Later A727/A904/A518 Transmissions;
- Product Attributes:
- Automotive Item Grade: High Performance
- Backup Light Switch: Yes
- California Proposition 65 Chemical Name 4: Alprazolam
- California Proposition 65 Chemical Name 3: Acetochlor
- Cover Included: Yes
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 12.120 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Dual
- WARNING CA Proposition 65: No
- Neutral Safety Switch Included: Yes
- Indicator Light Included: No
- NHRA Accepted: Yes
- Cable Included: Yes
- Trans Model:
- Chrysler- Torqueflite A727 (auto) 3 Speed
- Chrysler- Torqueflite A904 (auto) 3 Speed
- Ford- C- 4 (auto) 3 Speed
- Ford- C- 6 (auto) 3 Speed
- Gm- Th200 (auto) 3 Speed
- Gm- Th250 (auto) 3 Speed
- Gm- Th350 (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
-
Features:
- Base Trims For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Polished Aluminum. T-Handle and Cable
- The B&M StarShifter is our 3-speed shifter with a split personality of performance, function, and that classic muscle car styling. The first personality is as a straight-line detent shifter, meaning you can move between gears without a positive stop, like an OEM shifter. The racing personality comes into play when you want a ratcheting function, you just put the shifter down into low gear, pull the trigger up while pulling the shift handle down and it drops into ratchet mode. In this mode, the ratchet function will shift one gear at a time so you cant over-shift and miss a gear at that critical moment. Another cool feature is the reverse lockout which meets NHRA/IHRA safety rules for those weekend grudge races at the track. The look and feel of the T-handle and accordion-style shift boot really shows off the racing heritage of the StarShifter and looks a lot like its big brother, the MegaShifter. Other features include a black console that you can trim to fit your vehicles floor contour for a perfect fit, a 5-foot shift cable, cable brackets, transmission shift levers, chrome-plated top plate, and everything needed for an easy at home installation. Be sure to check out our optional T-handle with a 12-volt button for actuating a trans-brake, nitrous oxide, or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler A727, A904, A518 transmissions, Ford C4, C5, C6, and AOD transmissions, along with GM 3-speed automatic transmissions. Note: AOD transmissions require optional kit #40496. Overall Dimensions - 12.22L x 6.25W x 12.12H
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1964 - Ford P-350 | Automatic | 3 | C4 |
- Sport Shifter Automatic Shifter
- For GM TH400,350,250,200,700R4,2004R, Ford C4,C6 and AOD, Mopar 727 and 904
- Sport Shifter Automatic Shifter; Detent; 3/4-Speed Transmissions; Floor; Fits w/TH400/350/250/200/700R4/4L60/4L60E/4L65E/4L80E/C4/C5/C6/AOD/AODE/4R70W/E40D/4R100/727/904 Transmission;
- Product Attributes:
- Automotive Item Grade: High Performance
- Backup Light Switch: Yes
- California Proposition 65 Chemical Name 4: Alprazolam
- California Proposition 65 Chemical Name 3: Acetochlor
- Cover Included: Yes
- California Proposition 65 Chemical Name 2: Abiraterone Acetate
- Shift Lever Length: 11.150 In.
- California Proposition 65 Chemical Name 1: A-alpha-c (2-amino-9h-pyrido[2,3-b]indole)
- Mechanism: Detent
- WARNING CA Proposition 65: No
- Neutral Safety Switch Included: Yes
- Indicator Light Included: Yes
- NHRA Accepted: No
- Cable Included: Yes
- Trans Model:
- Chrysler- Torqueflite A727 (auto) 3 Speed
- Chrysler- Torqueflite A904 (auto) 3 Speed
- Ford- Aod (auto) 4 Speed
- Ford- C- 4 (auto) 3 Speed
- Ford- C- 6 (auto) 3 Speed
- Gm- Th200 (auto) 3 Speed
- Gm- Th200 4r (auto) 4 Speed
- Gm- Th250 (auto) 3 Speed
- Gm- Th350 (auto) 3 Speed
- Gm- Th400 (auto) 3 Speed
- Gm- Th700 R4 (auto) 4 Speed
-
Features:
- Base Trims For Custom Fit
- Neutral Safety Switch
- Backup Light Switch
- Lighted Gear Indicator
- Black T-Handle and Cable
- The SportShifter is a great value with the performance look of the MegaShifter, but without the ratcheting function. This detent shifter is our easiest shifter to operate and functions like most OEM shifters, with no positive stops between gears or a reverse lockout feature. To shift out of Park, you simply lift the handle and pull it back into Reverse, then simply move the shifter rearward to forward gears. To shift back into Reverse, from Neutral you will need to lift the handle and move shifter forward and again lift the handle to move it into the Park position. Features include a textured black mini console that has a chrome top plate with an illuminated gear indicator. Other features include a polished aluminum shift stick with a black T-handle knob and an accordion boot reminiscent of a manual 4-speed, giving your vehicles interior that classic muscle car look. The shifter includes a lighted gear position indicator in the bezel, a micro-switch for back-up lights and a neutral safety switch preventing accidental starts when in gear. Includes a 5-foot long performance shift cable, cable brackets, transmission levers, all hardware and detailed instructions for an easy installation you can do at home. Compatible with all 1966-later Chrysler A727, A904, A518. Ford C4, C6, AOD, AODE, 4R70W, E40D, 4R100. GM TH350, TH400, 700R4, 200R4, 4L60, 4L60E - 4L85E transmissions (w/o PRNDL switch.) Notes: Ford AOD requires installation kit #40496, AODE and 4R70W requires installation #40504, E40D and 4R100 requires installation kit #40505. GM 4L60E - 4L85E transmissions with PRNDL switch will require cable bracket #70499. Caution: Like OEM shifters, the Sport Shifter does not have a positive reverse lockout feature and without care, it is possible to accidentally over shift into reverse gear while moving. Overall Dimensions - 12.18L x 6.19W x 11.15H
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 1964 - Ford P-350 | Automatic | 3 | C4 |
- 17 Row Series 9000 Plate & Fin Transmission Cooler Kit, 1/2" NPT
- 17 Row Cooler
- 17 Row Series 9000 Plate & Fin Transmission Cooler Kit, 1/2" NPT
- 9000 Series Plate and Fin Transmission Cooler Kit
- Product Attributes:
- BTU: 23500
- Inlet dim: 8-1/2
- GVW: 24000
- Mounting: 6-11/16 X 9-13/16
- Depth: 1-1/4
-
Features:
- 17 Row Series 9000 Plate & Fin Transmission Cooler Kit, 1/2" NPT
- Very popular with original equipment manufacturers for use on their towing applications, our Plate and Fin coolers is no exception, featuring strong furnace-brazed construction, 1 1/4" wide plates and embossed turbulators which maximize heat transfer while also minimizing pressure drop. This unit is perfect for light to medium duty use and occasional towing. It greatly extends transmission life by preventing heat-related transmission failures, and improve shifting performance. Built with 1/2" NPT female cooler ports and includes 1/2" NPT x 3/8" hose barb adapters. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16" transmission cooler lines.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1964 - Ford P-350 | L | 3611 | Automatic | United States | 4 Cyl 3.6L | 220 |
Showing 1 - 10 of 22 products
Loading...