Shop By Product Matching "Transmission"
Choose your Engine for your 2024 Ram 2500
Image
Product
Price
- Performance Transmission Cooler, Fits RAM 6.7L Cummins 2019+
- Performance Transmission Cooler, Fits RAM 6.7L Cummins 2019+
- Product Attributes:
- SellingPoint04: High-efficiency Internal Fins Maximize Cooling For Lower System Temps
- SellingPoint05: Bolt-on Mounting Tabs Allow Installation With Radiator And A/c Condenser In Place
- SellingPoint06: Includes Oem-quality Quick-disconnect Fittings For Easy Install
- TechSpec Overall Length (in): 38.78
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Direct Fit For 2019+ Ram 6.7l Cummins
- SellingPoint02: 64% Thicker Core With 3 Additional Rows For Maximum Efficiency
- SellingPoint03: Tube-and-fin Core Optimizes Cooling While Reducing Restriction
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): 7.13
- TechSpec Core Thickness (in): 1.26
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 34.65
- TechSpec Overall Height (in): 8.58
- TechSpec Fluid Capacity (qts): 1.33
- TechSpec Caution: N/a
- TechSpec Applications: Ram 2500 6.4l V8 2019+--ram 3500 6.4l V8 2019+--ram 2500 6.7l L6 2019+--ram 3500 6.7l L6 2019+
- TechSpec Includes: (1) Mishimoto Performance Transmission Cooler--(2) Quick-disconnect Fittings--(2) Mounting Tabs--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: 17
- TechSpec Inlet: N/a
- TechSpec Core Construction: Tube-and-fin
- TechSpec Overall Width (in): 2.36
- There's no greater enemy for a transmission than heat. Whether your 2019+ RAM 6.7L Cummins is a dedicated tow vehicle, hardworking fleet truck, or a daily driver with a liking for the dragstrip, you need to ensure that your transmission runs cool. Luckily, Mishimoto has developed a direct-fit transmission cooler to do just that.--Our 2019+ RAM 6.7L Cummins transmission cooler utilizes a tube-and-fin core with internal fins to balance flow with efficient cooling. Our transmission cooler reduces restriction over stock, while adding cooling performance. With a massive 64 percent thicker core and an additional 3 rows of fins, this trans cooler is a huge improvement over the stock unit. To make even better use of that enlarged core, the Mishimoto transmission cooler utilizes fins within the tubes to not only add more cooling surface area, but also ensure more of the fluid contacts the tube, leading to better cooling efficiency. All these improvements translate to lower inlet temperatures over stock for a cooler transmission when you need it most.--Installation of the Mishimoto 2019+ RAM 6.7L Cummins transmission cooler requires no cutting or other modifications and, thanks to the bolt-on mounting tabs, your radiator and A/C condenser can stay in place, reducing the time and cost of installation. Like all Mishimoto products, this transmission cooler is backed up by our Lifetime Warranty with Accident Protection for worry free cooling as long as you own it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Ram 2500 | V | 6424 | 8 Cyl 6.4L | 392 |
- Engine Transmission Cooler
- Product Attributes:
- Inlet Diameter: 0.21
- Grade Type:
- Performance
- Rendimiento
- Mounting Hardware Included:
- No
- Non
- Core Row Quantity: 16
- Tube Included:
- No
- Non
- Outlet Attachment Type:
- Empujar Hacia Adentro
- Push-in
- Finish:
- Painted
- Pintado
- Line Included:
- No
- Non
- Core Material:
- Aluminio
- Aluminum
- Contenidos del paquete: 1 Enfriador De Transmisión Automática
- Strap Included:
- No
- Non
- Cooling Row Quantity: 16
- Depth: 0.45 In
- Electric Fan:
- No
- Non
- Material:
- Aluminio
- Aluminum
- Inlet Attachment Type:
- Empujar Hacia Adentro
- Push-in
- Outlet Diameter: 0.65
-
Features:
- Direct replacement - this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle
- Ideal solution - engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.
This Part Fits the Following OEM/Substitute Numbers:
19158, 68322494AC
Additional Fitment Information:
| Vehicle | Fuel Type |
|---|---|
| 2024 - Ram 2500 | DIESEL |
- ROADMASTER 68RFE TRANSMISSION & PRO FORCE CONVERTER RAM 2019-2024 4WD
- 4wd; C/w torque converter;
- Roadmaster 68rfe Transmission & Pro Force Converter Ram 2019-2022 4wd
- 68rfe Transmission and Converter Pkg
- Product Attributes:
- Drivetrain: 4wd
- Category: Auto Trans & Converter Packages
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1064043
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- BD protect68 valve body
- BD deep sump oil pan
- Stock transmission clutch counts
- Billet spring retainer, 4c
- BD ProForce Torque Converter
- BD 68RFE transmission, featuring protect68 kit already installed! Upgraded valve body with BD gasketed separator plate solves common cross leak issues that lead to clutch failure. The deep sump aluminum pan increases fluid capacity and cooling. Perfect transmission for stock or mildly tuned trucks with stock or stock-plus injectors! Includes a ProForce billet torque converter. Every ProForce 68RFE converter features an upgraded forged billet cover and upgraded stator for lower rpm response!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD Protect68 Gasket Plate Kit Dodge 6.7L 2019-2024 68RFE Transmission
- BD Protect68 Gasket and Separator Plate Kit Dodge 6.7L 2019-2022 68RFE Transmission
- Protect68 Gasket Plate Kit
- Product Attributes:
- Category: Shift & Pressure Controls
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1071220x
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Ideal for use with EFI Live, HP Tuners or other transmission pressure tuning
- Recommended full throttle max line pressure 225-250psi
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Exclusive BD separator plate gaskets eliminate cross leaks and eliminate P0871 codes
- Heavy duty accumulator plate to prevent accumulator blowout
- Kit includes pan gasket, 3 doughnut seals and check ball
- This kit requires custom transmission tuning or an additional module to command higher line pressure
- Industry leading custom bonded gasket valve body separator plate substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures - up to 250psi. Kit includes a heavy duty accumulator plate to prevent accumulator blow-out. Ideal for use with EFI Live, HP Tuners, and other transmission pressure tuning.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD TorqueMaster Dodge 68RFE Transmission & Converter Package 2019-2024 4wd
- 4wd; Billet input shaft; C/w multidisc torque converter;
- BD TorqueMaster Dodge 68RFE Transmission & Converter Package - 2019-2024 4wd c/w Billet Input Shaft
- 68rfe Transmission and Converter Pkg
- Product Attributes:
- Drivetrain: 4wd
- Category: Auto Trans & Converter Packages
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1064043
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- TRANSMISSION:
- Stamp forged 1-piece cover
- Hard anodized valve body and new solenoid pack installed in every unit
- Eliminates warpage from clutch heat
- Taller cover can be rebuilt more often
- Trapezoid teeth design
- Engineered tighter tolerances
- Self-centering trapezoid teeth design increases contact decreases wear and chatter
- Thrust bearings - not plastic thrust washers
- Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
- Cast stator designs maximizes torque
- BD reinforced accumulator plate
- New sprag components ensure long term durability
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Reduced overall weight by 12lbs compared to competitors
- Heavy duty cam & roller design low reverse one way clutch
- New 4C billet spring retainer
- Steel girdle added to 2C piston to allow for more clutches and broader apply area
- BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
- Over Drive clutches 33% increase & 2C clutches 33% increase
- Custom Big Stack overdrive shaft
- BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
- Performance Transmission but with the added touch of a Billet Input Shaft to take the "snap" from rapid throttle and high horsepower
- Special tuning required for 2019-up applications for increased line pressure. Line pressure controller not included.
- TORQUE CONVERTOR:
- Triple Disc
- Enhanced Stall - Street/Towing applications
- HD springs absorb shock of engagement
- When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE Proforce 3D Torque Converter - Dodge 2007.5-2024 Enhanced Stall
- Enhanced Stall;
- BD 68RFE Proforce 3D Torque Converter - Dodge/RAM 2007.5-2022 Enhanced Stall
- Triple Torque Force Conveter
- Product Attributes:
- Stall Speed: Enhanced
- Category: Torque Converters
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1041210
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Enhanced Stall - Street/Towing applications
- Increased clutch count
- Eliminates warpage from clutch heat
- Taller cover can be rebuilt more often
- Trapezoid teeth design
- Engineered tighter tolerances
- Self-centering trapezoid teeth design increases contact decreases wear and chatter
- Thrust bearings - not plastic thrust washers
- Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
- Cast stator designs maximizes torque
- New sprag components ensure long term durability
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Reduced overall weight by 12lbs compared to competitors
- HD springs absorb shock of engagement
- Stamp forged 1-piece cover
- Not all multi-disc converters are created equal and with BD's ProForce 3D, less is more. Our in-house CNC machined billet cover is designed to prevent warping and improper balancing. With our cover design, we were able to increase strength while maintaining the factory height. We have engineered the clutch piston and damper assembly for increased strength, while retaining smooth and reliable vibration damping. With self-centering trapezoid clutch teeth design, our clutch packs ensure proper alignment and less wear resulting a longer converter life cycle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE ProForce Enhanced Stall Torque Converter - Dodge 2007.5-2024 6.7L
- Enhanced Stall;
- BD 68RFE ProForce Enhanced Stall Torque Converter - Dodge/RAM 2007.5-2022
- Double Disc Torque Conveter
- Product Attributes:
- Category: Torque Converters
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1041221
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Good for 550 flywheel HP
- Ideal replacement for stock torque converter
- High performance Enhanced stall stator
- Great for street and towing applications
- Lower rpm response than the stock converter
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Damper springs replaced
- 11.625 inch dual-clutch
- Billet forged front cover with thicker walls and stronger mounting pads
- The BD 68RFE ProForce Torque Converter is designed for stock and modified 6.7L Diesels, from 350 to 550 flywheel horsepower, used in street and towing applications, at a great price. Featuring BD's exclusive "Enhanced Stall" performance cast aluminum stator that improves efficiency and durability for low RPM response in stock to higher horsepower applications. The 68RFE ProForce uses a billet forged front cover machined with thicker walls and stronger mounting pads and a 11.625 inch dual-clutch. The turbine fins are furnace-brazed for improved fluid coupling efficiency and new piston damper springs are installed for longevity and durability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE Big Stack Overdrive Shaft & Reaction Plates Kit Dodge 2007.5-2024 6.7L
- 68RFE transmission;
- BD 68RFE Big Stack Overdrive Shaft & Reaction Plates Kit Dodge/RAM 2007.5-2022 6.7L Cummins
- Big Stack Shaft & Plates
- Product Attributes:
- Category: Overhaul Kits & Parts
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030373
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- 16 Overdrive friction surfaces
- 33% increased torque holding capacity
- Billet QT100 Reaction plates
- Longer clutch engagement area
- 33% more steel mass for better heat absorption
- Raybestos clutches B29308L / B29309L are required (included in BD Build-It kits)
- Are you a looking to rebuild your own transmission and needing some specialty parts to match your application? BD offers a range of rebuild parts kits featuring the same parts we use in our own performance transmissions for the seasoned builder to complete the job. All kits include the basic rebuild parts and gaskets and have the added touches that range from stock HP up to our Stage 4 Master Kit - which is pretty well everything we put in our own transmission rebuilds.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- BD 68RFE/Aisin AS69RC Cooler Bypass Delete - Dodge/RAM 2019-2024 6.7L
- 68RFE or Aisin AS69RC transmission;
- BD 68RFE/Aisin AS69RC Cooler Bypass Delete - Dodge/RAM 2019-2024 6.7L 2500/3500/4500/5500
- Thermostat Bypass
- Product Attributes:
- Category: Trans Coolers
- Engine: 6.7l Cummins 19-up
- Suggested Product: 1030606-1/2
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Ensures 100% fluid flow through the transmission cooler
- Keeps your transmission temperature as low as possible
- Fits 68RFE & Aisin AS69RC Transmission
- Eliminates factory bypass valve
- Debris in the stock cooler bypass valve can cause it to jam the internal valve keeping it in recirculation mode. When this happens the transmission temperature will rise and can lead to overheating and premature transmission failure. The BD Cooler Bypass Delete keeps the transmission cooler operational all the time and eliminates this failure prone item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2024 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- WIX Automatic Transmission Filter Kit
- Original Equipment Part Number 05015267AD Shallow Pan Filter
- Product Attributes:
- Inner Diameter Top: Closed
- Duty Type: Ld
- Class: C
- Automatic transmission filters feature design and construction that ensure no unfiltered fluid can bypass the application specific filtration media. Lock seamed and sealed assemblies and application specific sealing components ensure complete filtration. WIX transmission filter kits include sealing gaskets specifially designed for use with today's sophisticated transmission fluids
This Part Fits the Following OEM/Substitute Numbers:
05015267AC, 05015267AD, 18290, 19999, 4799662, 4800029AA, 5015267AC, 5490, 58846, 61658846, 707950, 88846, 96047, 96057, B197, B200, B246, F212...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2024 - Ram 2500 | V | 6424 | Canada | 8 Cyl 6.4L | 392 |
Showing 1 - 10 of 24 products
Loading...