Shop By Product Matching "V60"
Image
Product
Price
- Product Attributes:
- :
- 31
- 76
- Max Belt Width: 06 Rib
- Bearing Inner Diameter 1: 17
- Number of Bearings: 1
- Flat: Y
- Material: Steel
- Belt Type: Serpentine
- :
This Part Fits the Following OEM/Substitute Numbers:
04861531AA, 06004092, 10129560, 12557682, 12557838, 12562347, 12563097, 12564506, 12564508, 12569736, 12581700, 12587295, 1L2E-6B209-CA, 1L2Z-6B209-AA, 1L5Q-6A228-AB, 1L5Z-6B209-AA, 1S7Q-19A216-AD, 1S7Z-8678-AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1998 - Mercury Sable | V | 2986 | 6 Cyl 3.0L | 182 |
- Champion Copper Plus- Boxed - RS14YC6
- Gap 0.054in; Plug Type RS14YC6
- Champion Copper Plus 13 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.689
- Center Electrode Tip Material: Nickel
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Manufacturer Heat Range: 14
- Pre-Gap Size:
- 0.055
- 1.41
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Plug Type: Rs14yc6
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
41-600, 41-601, 41-606, 7980, 7982, 82300320, AGSF42C6, AWRF32-5, HR8DCX, HR9DCY, HR9LCX, R42CLTS6, R42LTS6, R43NTS6, R44LTS6, R44LTS6K, R45LTS6, R45LTS6K...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Engine VIN | CID |
|---|---|---|---|---|---|
| 1998 - Mercury Sable | V | 2968 | 6 Cyl 3.0L | S | 181 |
- Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter: .38
- Material: Epdm
- End 2 Inside Diameter: .38
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10031, 1405630R60, 14056V5007, 16002M, 1626476040, 18031, 63101, 87001, 8971362192, D87001, F5RZ 8B081 C, F5RZ 8B081 D, F6DE 8C633 AB, F8RZ 8B081 EA, MD103789, YF1Z 8C633 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1998 - Mercury Sable | V | 2986 | Reservoir To Pipe-3 | OHV | GAS | 6 Cyl 3.0L | 182 |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number E1FZ6731A Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 16
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 237, 0 451 103 360, 0 986 AF0 053, 0 986 AF1 143, 0418095, 0418996, 116, 134, 1516, 1718818, 20400, 21516, 2224520, 31516, 3422, 41516, 5001200188, 51516...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1998 - Mercury Sable | V | 2986 | Canada | 6 Cyl 3.0L | U | 182 |
- Viton Type
This Part Fits the Following OEM/Substitute Numbers:
01-85004, 052-4045, 15-01116, 15-02503, 15-07802, 17054, 1R12-01-10434, 287.300, 36147, 3909, 47941, AJ03-11-312, AJ03-11-312A, AJ89510, BS 261, E2ZE6701A2A, E2ZE6701A4A, E2ZE6701AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1998 - Mercury Sable | V | 2968 | Rear | DOHC | 6 Cyl 3.0L | 181 |
Showing 1 - 5 of 5 products
Loading...