Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2005 - Buick LaCrosse | United States |
- Blower Motor Resistor Kit With Harness
- Product Attributes:
- Connector Gender:
- Female
- Hembra
- Gasket Or Seal Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Wiring Harness Included:
- Oui
- Sí
- Yes
- Wiring Harness Length: 6
- Connector Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Terminal Type:
- Aspa
- Blade
- Mounting Hole Quantity: 7
- Terminal Gender:
- Macho
- Male
- Terminal Quantity: 5
- Wire Quantity: 5
- Connector Gender:
-
Features:
- Direct replacement - this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
- Complete kit - each kit comes with a resistor and harness pigtail, which is essential for most repairs
- Restores functionality - made to perform like original equipment to restore full HVAC operation
- Trustworthy quality - backed by team of engineers and quality specialists in the USA
- This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
10325408, 10356906, 10397570, 15827470, 15827491, 15850268, 19260762, 20340, 22754990, 4P1516, 52495874, 52497491, 89018653, 89018778, 89018849, 89018964, 89019351, 93803635...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Buick LaCrosse | Front |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Buick LaCrosse | V | 3564 | Downstream | 6 Cyl 3.6L | 217 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Buick LaCrosse | V | 3564 | 6 Cyl 3.6L | 217 |
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10352662, 10372246, 1078-290314, 10841, 10848, 11841, 12F64, 15225005, 15832215, 20852988, 20852993, 20882859, 20914961, 20915842, 25820825, 25827335, 31843, 31852...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Buick LaCrosse | V | 3564 | 6 Cyl 3.6L | 217 |
- Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 12.99
- Excludes Calif. O.E. Quality Direct Fit Replacement Sensor OE
- Oxygen Sensor - OE Style
- Product Attributes:
- Sensor Type: Narrow-band
- Connector Gender: Female
- Wiring Harness Length: 12.99
- Thread Diameter: 0.708
- Mounting Type: Threaded
- Wire Quantity: 4
- DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
This Part Fits the Following OEM/Substitute Numbers:
12558143, 12568234, 12569496, 12574218, 12583190, 12585055, 13455, 15898, 15899, 19209814, 21045, 21055, 213-1553, 213-360, 213-968, 21517, 2344646, 250-24273...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Buick LaCrosse | Upstream |
- ANCO 31-Series Wiper Blade (22")
- Conventional Blade Option this is a 22'' 9 x 3 Hook Conventional Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4" Side Lock
- ANCO 31-Series Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Frame Material: Steel
- AAP_UDA_4: 110
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- KwikConnect Installation System provides quick and easy wiper blade replacement
- Available in 10" - 28" lengths
- Consistent, clear wipe in any driving environment
- Conventional Wiper Blade
- Vented bridge and high performance polymer ensure OE fit and function
- DuraKlear exclusive rubber compound provides a consistent streak-free wipe
- Affordable conventional blade replacement
- ANCO 31-Series conventional wiper blades offer a vented bridge and high performance polymer that ensures OE fit and function. They are equipped with our proprietary Kwik Connect Installation System, our exclusive Duraklear rubber compound, and our poly link structure which allows for a smooth, quiet operation.
This Part Fits the Following OEM/Substitute Numbers:
22-1, 22-4, 22-51, 22-54, 22-59, 22-9, 23-1, 23-51, 30-221, 30-222RF, 350-221, 358-220, 359-230, 3722, 38-220, 39-221, 39-230, 40322...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Buick LaCrosse | Front Left |
- ANCO 31-Series Wiper Blade (22")
- Conventional Blade Option this is a 22'' 9 x 3 Hook Conventional Wiper Blade
- 9mm Hook, 9x4 Hook, 1/4" Side Lock
- ANCO 31-Series Wiper Blade
- Product Attributes:
- Salability Restrictions: N
- Number of Wiping Edges: 1
- Frame Material: Steel
- AAP_UDA_4: 110
- Contains Electronic Components: No
- Engine Specific: N
- AAP_UDA_129: N
- Frame Color: Black
- AAP_UDA_125: N
- AAP_UDA_126: N
- AAP_UDA_127: N
- Is Item A Chemical: No
- Blade Type: Conventional
- Adapter Type: Pre-attached Adapter
- Adapters Required: Yes
- Snowmobile: N
- Personal Watercraft: N
- Winter Blade: No
- Is Or Contains A Battery: No
- Variable Speed: No
- Shipping Exclusions: N
- High Performance: Y
- Attached Spoiler/Aerofoil: No
- AAP_UDA_132: N
- California Proposition 65 Warning Type: N/a
- AAP_UDA_133: N
- Is Or Contains A Bulb: No
- Adapters Included: Yes
- Motorcycle ATV: N
- Non-Vehicle Specific: N
- AAP_UDA_130: Y
- AAP_UDA_131: N
- Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9x3 Hook, 9x4 Hook
- AAP_UDA_119: Y
- Transmission Specific: N
- Refillable: Yes
- Small Engine: N
-
Features:
- KwikConnect Installation System provides quick and easy wiper blade replacement
- Available in 10" - 28" lengths
- Consistent, clear wipe in any driving environment
- Conventional Wiper Blade
- Vented bridge and high performance polymer ensure OE fit and function
- DuraKlear exclusive rubber compound provides a consistent streak-free wipe
- Affordable conventional blade replacement
- ANCO 31-Series conventional wiper blades offer a vented bridge and high performance polymer that ensures OE fit and function. They are equipped with our proprietary Kwik Connect Installation System, our exclusive Duraklear rubber compound, and our poly link structure which allows for a smooth, quiet operation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Buick LaCrosse | Front Right |
- Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 15.75
- Calif. DENSO is the O.E. Manufacturer / Direct Fit Oxygen Sensor OE
- Oxygen Sensor - OE Style
- Product Attributes:
- Sensor Type: Narrow-band
- Connector Gender: Male
- Wiring Harness Length: 15.75
- Thread Diameter: 0.708
- Mounting Type: Threaded
- Wire Quantity: 4
- DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
This Part Fits the Following OEM/Substitute Numbers:
12569429, 12573005, 12573167, 12576131, 12583290, 12583804, 12584925, 12587785, 12590790, 12594452, 12596558, 12597878, 12607410, 12609001, 12611127, 13779, 15133, 15152...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Buick LaCrosse | Upstream |
- DriveAlign Premium OE Pulley
- Product Attributes:
- Contact Surface: Smooth/backside
- Pulley Quantity: 1
- Pulley 1 Groove Quantity: 0
- Pulley 1 Outside Diameter (mm): 76
- Pulley 1 Flanged: No
- Bearing Bore Inside Diameter: 17
- Pulley 1 Width (mm): 30.5
- Material: Steel
-
Features:
- Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
- Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
- OE-quality fit for virtually every domestic or import vehicle on the road today
- Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
- Premium bearings eliminate bearing noise
- Mounting hardware included for some popular applications
- Reliable operation under severe conditions
- DriveAlign Idler Pulleys provide OE-quality fit to passenger cars and light trucks, performing as a locked center tensioning pulley, an automatic belt tensioner pulley or an idler pulley.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00039, 04317RCA305, 06003051, 06004092, 10000039, 10000404, 10055798, 10105371, 10129560, 10183939, 12506508, 12557682, 12557838, 12558185, 12558520, 12561092, 12562347, 12564505...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Buick LaCrosse | V | 3800 | GAS | 6 Cyl 3.8L | 231 |
Showing 1 - 10 of 60 products
Loading...