Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Patriot |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2013 - Jeep Patriot | Rear |
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Patriot |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Patriot |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 11
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Series: Oem Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 1
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51355
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51355 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Jeep Patriot | L | 1998 | 4 Cyl 2.0L | 122 |
- Taper Bearing Set Includes Cup and Cone
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04567022, 051-3869, 05143673AA, 09265-38001, 0K01A-33-075, 0K211-27-350A, 0S231-33-075, 2209810805, 26046759, 26046795, 3125.19, 3699676, 3699677, 370016, 3780531, 38-01118, 38-01518, 4269676...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Trans. Speed | Transmission Manuf. Code |
|---|---|---|---|
| 2013 - Jeep Patriot | Manual | 5 | T355 |
- E3 Premium DiamondFIRE Power Automotive Spark Plug
- Product Attributes:
- Application Specific or Non-Application: Application Specific
- Electrode Core: Copper
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Part Type Name: Automotive Spark Plug
- Hex Size: 5/8
- Reach:
- 19.05
- 3/4
- Center Electrode Tip Material: Nickel
- Resistor: Resistor
- Bullet:
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- e3 Spark Plugs Are Pre-gapped At The Factory To Meet O.e. Requirements
- Efficiency - E3 "diamond Shaped" Side Wire Electrode Projects The Combustion Spark In A Way That More Quickly Ignites The Air/fuel Mixture, Thereby Creating A Significantly Faster And Longer Flame Kernel, More Fuel Is Put To Work With Less Waste; Creating
- Energy - Power Output Improved By 6% On Average In The Typical Operating Ranges-results Will Vary
- Smoother Acceleration & Idle - The Faster Flame Initiated By The E3 Spark Plug Results In A More Complete Burn Of The Ingested Fuel Charge. More Pressure Is Created Against The Piston More Fuel Is Put To Work
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- Spark Plug Approximate Resistor Value: 3500-7000
- Gap: Pre-gapped At The Factory To Meet O.e. Requirements; Gap Cannot Be Adjusted
- Pre-Gap Size:
- .040
- 1.016
- Electrode Tip: Nickel
- Insulator Height:
- 2.023
- 51.38
- Brand Name: E3 Spark Plugs
- Features & Benefits: E3 Spark Plugs Are The Product Of Years Of Fundamental Research In The Combustion Field. The Unique Patented Ground Electrode Configuration Increases The Amount Of Combustion Pressure Created During Each Power Stroke Of The Engine, Which Results In A Mar
- Seat Style: Gasket
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1086, 1172, 1311, 1313, 2071, 2087, 2262, 2271, 2300, 2382, 2391, 2417, 2460, 2477, 2526, 2546, 2647, 2685...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Jeep Patriot | L | 1998 | 4 Cyl 2.0L | Latitude | 122 |
- E3 Premium DiamondFIRE Power Automotive Spark Plug
- Product Attributes:
- Application Specific or Non-Application: Application Specific
- Electrode Core: Copper
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Part Type Name: Automotive Spark Plug
- Hex Size: 5/8
- Reach:
- 19.05
- 3/4
- Center Electrode Tip Material: Nickel
- Resistor: Resistor
- Bullet:
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- e3 Spark Plugs Are Pre-gapped At The Factory To Meet O.e. Requirements
- Efficiency - E3 "diamond Shaped" Side Wire Electrode Projects The Combustion Spark In A Way That More Quickly Ignites The Air/fuel Mixture, Thereby Creating A Significantly Faster And Longer Flame Kernel, More Fuel Is Put To Work With Less Waste; Creating
- Energy - Power Output Improved By 6% On Average In The Typical Operating Ranges-results Will Vary
- Smoother Acceleration & Idle - The Faster Flame Initiated By The E3 Spark Plug Results In A More Complete Burn Of The Ingested Fuel Charge. More Pressure Is Created Against The Piston More Fuel Is Put To Work
- Ecology - E3 Provides A Cleaner Burning Combustion, Which Translates Into Fuel Savings And Reduced Engine Carbon Deposits
- Spark Plug Approximate Resistor Value: 3500-7000
- Gap: Pre-gapped At The Factory To Meet O.e. Requirements; Gap Cannot Be Adjusted
- Pre-Gap Size:
- .040
- 1.016
- Electrode Tip: Nickel
- Insulator Height:
- 2.023
- 51.38
- Brand Name: E3 Spark Plugs
- Features & Benefits: E3 Spark Plugs Are The Product Of Years Of Fundamental Research In The Combustion Field. The Unique Patented Ground Electrode Configuration Increases The Amount Of Combustion Pressure Created During Each Power Stroke Of The Engine, Which Results In A Mar
- Seat Style: Gasket
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Jeep Patriot | L | 2360 | 4 Cyl 2.4L | Limited | 144 |
- Includes 5 in. Touch Screen; 3rd Generation;Not Legal For Sale Or Use In California
- CTS3 Gas Evolution Programmer; Includes 5 in. Touch Screen; 3rd Generation;
- CTS3 Gas Evolution Programmer
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Most Comprehensive Multi-gauge/Tuner Touch-Screen Display
- 3rd Generation Design Is Faster And More Capable
- Power Levels Designed For Driving/Towing/Performance/Extreme
- Up To 175 HP And 470 lb-ft TQ
- Simple Installation No Wiring Required
- Ability To Add Vehicle Licenses To Tune Multiple Vehicles
- Clear And Read DTC Codes
- Wi-Fi Updateable
- SAVES FACTORY SETTINGS AND RETURNS EASILY TO STOCK Introducing the next generation Evolution CTS3: all-new, full-Color Touch Screen CTS3. The CTS3 will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, all while adding a sleek, new exterior and cutting-edge screen. The best look in the industry delivered via a revamped, slim case design and a 5 full-color capacitive edge-to-edge display with true swipe screen technology. Not only is the display sharper, but the higher resolution screen delivers a tremendous pixel ratio and top-notch graphics. New screen layouts, faster processing speeds, and Wi-Fi update capability are just a few things that set the Evolution CTS3 apart from all other competitors. The Evolution CTS3 reprograms your vehicles stock computer through the OBDII port of the vehicle. The Evolution is used to save the stock files from the vehicles computer and then upload the Edge calibrations into the vehicles computer. This product comes with multiple power levels custom tuned by a whole team of engineers and can be installed in minutes without ever popping the hood. The Evolution greatly increases horsepower and torque and not only does it re-tune your vehicle, it stays mounted in the cab of the vehicle and features real-time, monitoring of vital engine and vehicle data for a complete gauge package. If youre looking for a product to improve throttle response, that extra power when towing, race down the track, increase fuel economy, or just improve the overall driveability of your truck then the Evolution is the option. Not only do you get these increase performance features but you get a monitor that offers a clean simple solution for gauges like EGT (exhaust gas temperature), Boost readings, transmission temp, load percent, percentage of fuel left, and more with the expandability to even add more with our EAS (expandable accessory system) or Edges backup camera.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Jeep Patriot |
- OEM Grade Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.25in.
- Universal OEM Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.25
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Oxygen Sensor Location: Midbed
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Sensor Port Count: 1
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51355 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Jeep Patriot | L | 1998 | 4 Cyl 2.0L | 122 |
Showing 1 - 10 of 41 products
Loading...