Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Silverado 1500 |
- Trailer Brake Controller Harness; Select Cadillac; Chevrolet; GMC (Packaged)
- Length 12 in. Install Time 5 Minutes
- CURT 51452 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Chevrolet Silverado; Suburban; Tahoe; GMC Sierra; Yukon; Escalade
- 4-Way Square Plug Wiring Extension
- Product Attributes:
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Cadillac Escalade, Escalade ESV, Chevy Silverado and GMC Sierra 1500, 1500 LD, 1500 Limited, 2500HD, 3500HD Suburban, Suburban 1500, Suburban 3500HD, Tahoe, Yukon and Yukon XL (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Silverado 1500 |
- 4in. Black Steel Oval Side Bars; Select Silverado; GMC Sierra 1500; 2500; 3500 H
- Carbon Steel; Semi Gloss Black; Board And Bracket; Rocker Panel Mount
- ARIES S224046 4-Inch Oval Black Steel Nerf Bars; Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD
- The Standard 4 in. Oval Nerf Bar
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- 20-Degree Bends To Contour To The Body Of The Vehicle
- Seamless/ Welded End Caps For Superior/ Finished Look
- Raised/ Custom/ Non-Skid Step Pads For Safe/ Cozy Entry And Exit
- High-Strength Carbon Steel Construction
- Durable E-Coat And Semi-Gloss Black Powder Coat Finish
- Brushed Stainless Steel Insignia On Each Step
- Elliptical/ 4 in. Wide/ Heavy-Wall Tube Design
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets
- Includes One Pair Of Side Bars And Mounting Hardware
- When you start and end your day turning the ignition of your truck, unreliable footing just is not an option. You need a step that can bear weight with ease, provide comfortable footing and look good doing it. ARIES 4 in. oval side bars are sleek, strong and custom-fitted to be a highly functional extension of your truck. For a variety of makes and models, 4 in. oval sides are a step up. ARIES 4 in. oval side bars are made with strong 4 in. elliptical tubing and are available in two different finish options to allow you full customization. This set of side bars is constructed from high-strength carbon steel for a solid step, and they feature a dual-layer E-coat and semi-gloss black powder coat finish for excellent protection against scratching, chipping and peeling. Something that sets the ARIES 4 in. oval side bar apart from all others is its blended end caps and OE-style bends. Rather than capping our side bars with a plastic cap, we offer a blended end cap for a smooth, finished appearance. We also equip the ends with a special 20-degree bend and original equipment styling to perfectly contour to your vehicle. ARIES 4 in. oval side bars are fitted with raised step pads to provide a wide stepping surface. The polypropylene construction will not crack over time, and because it has a textured grip, the surface is highly resistant to slips and skids, even when wet. To add an extra element of class to our oval sides, we also fit each one with a stainless steel insignia bearing the ARIES name. Installation of ARIES 4 in. oval side bars is quick and easy with custom-fitted mounting brackets and no drilling necessary (NOTE: This set of side bars is compatible with DEF tank models).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2018 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | WT | Extended Cab Pickup | 262 |
- BD Chevy 2 Low UnLoc - 4wd 2015-2019 2500-3500 / 2014-2019 1500 / 2015-2020 SUV
- 4wd;
- BD Chevy 2 Low UnLoc - 2015-2019 2500-3500 4wd / 2014-2019 1500 4wd / 2015-2020 SUV 4wd
- 2 Low UnLoc
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1036627
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Installation is simple, the kit plugs in under the hood
- No wire cutting or splicing
- Kit comes with an illuminated rocker switch for control and to indicate when the front axle is being overridden
- Designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range
- By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels
- This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding
- With this kit installed, the front wheels will NOT be driven through the transfer case
- Allows to have full power and torque while in a high gear reduction applied to the rear axle(s) only
- Vehicle maneuverability is reduced while in 4WD. When the 2Low Unloc is turned on, you disable the front wheel drive mechanism allowing for full torque to be available to the rear wheels only. The front wheels will NOT be driven, delivering normal 2WD maneuverability while in low range! This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Chevrolet Silverado 1500 | V | 6162 | 8 Cyl 6.2L | 376 |
- Custom Towed-Vehicle RV Wiring; Select Silverado; Sierra 1500; 2500; 3500 HD
- For Dinghy Towing; Includes Harness/4-Flat Extension/Mounting Bracket And Hardware
- CURT 58967 Custom Towed-Vehicle RV Wiring Harness for Dinghy Towing; Fits Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD
- Towed-Vehicle RV Harness
-
Features:
- Connects A Towed Vehicle To An Rv Using A Standard 4-Way Flat
- Eliminates The Need For Cutting/Splicing
- Block Diodes Isolate Vehicle Electronics From RV Signals
- Uses Towed Vehicle Existing Taillights Brake Lights/Turn Signals
- Towing your vehicle behind your RV is a great way to experience more of the adventure on your cross-country excursions. Whether youre towing a compact car or a full-size truck, CURT has the perfect solution to help you Bring It! CURT towed-vehicle RV harnesses are a vehicle-specific, plug-and-play solution to wiring your vehicle for dinghy towing. They use original-equipment-compatible connectors to plug into your vehicles wiring system without any cutting, splicing or soldering required. They provide a standard 4-way flat connector to plug into the RV socket and synchronize the vehicles tail lights, turn signals and brake lights with the RVs. Because each towed-vehicle RV harness has a vehicle-specific design, installation is fast and easy. This particular RV dinghy towing wiring harness is designed for specific years of the Chevy Silverado and GMC Sierra 1500, 1500 LD / Limited, 2500 HD and 3500 HD. CURT RV harnesses are also built to provide long-lasting operation. They feature integrated block diodes that protect the vehicles circuits from the RV signals. They isolate the sensitive vehicle electronics, keeping them from overheating and short circuiting. Every CURT towed-vehicle RV harness comes ready to install with all necessary hardware included. They also come with a 4-way flat extension to provide plenty of length to plug into the RV socket, as well as a connector mounting bracket to mount the connector on the vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Chevrolet Silverado 1500 |
- 3in. Round Black Steel Side Bars; Select Silverado; Sierra 1500; 2500; 3500 HD
- Includes Side Bars And Mounting Hardware; Rocker Panel Mount; Carbon Steel; Semi-Gloss Black
- ARIES 204046 3-Inch Round Black Steel Nerf Bars; No-Drill; Fits Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD
- Aries 3 in. Round Side Bars
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Tube Shape: Round
-
Features:
- Unique Bends To Contour To The Body of The Vehicle
- Custom/ Non-Skid Step Pads For Safe Entry And Exit
- 3 in. Diameter/ Heavy-Wall Tube Design
- High-Strength Carbon Steel Construction
- Rust-Resistant Semi-Gloss Black Powder Coat And E-Coat Finish
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets
- Includes One Pair Of Side Bars And Mounting Hardware
- ARIES 3 in. side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3 in. nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3 in. round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3 in. nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Chevy Silverado 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 Classic or 3500 HD and GMC Sierra 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 Classic or 3500 HD (see application info to verify fitment). ARIES 3 in. round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2018 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | WT | Extended Cab Pickup | 262 |
- 4in. Polished Stainless Oval Side Bars; Select Silverado; Sierra 1500; 2500; 350
- Polished Stainless Steel; Board And Bracket; Rocker Panel Mount
- ARIES S224046-2 4-Inch Oval Polished Stainless Steel Nerf Bars; Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD
- The Standard 4 in. Oval Nerf Bar
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- 20-Degree Bends To Contour To The Body Of The Vehicle
- Seamless/ Welded End Caps For Superior/ Finished Look
- Raised/ Custom/ Non-Skid Step Pads For Safe/ Cozy Entry And Exit
- Strong And Truly Rust-Resistant Stainless Steel Construction
- Mirror-Like Polished Stainless Steel Finish For Bright Accent
- Brushed Stainless Steel Insignia On Each Step
- Elliptical/ 4 in. Wide/ Heavy-Wall Tube Design
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets
- Includes One Pair Of Side Bars And Mounting Hardware
- When you start and end your day turning the ignition of your truck, unreliable footing just is not an option. You need a step that can bear weight with ease, provide comfortable footing and look good doing it. ARIES 4 in. oval side bars are sleek, strong and custom-fitted to be a highly functional extension of your truck. For a variety of makes and models, 4 in. oval sides are a step up. ARIES 4 in. oval side bars are made with strong 4 in. elliptical tubing and are available in two different finish options to allow you full customization. This set of side bars is constructed from 304 stainless steel, meaning high nickel content to be truly stainless. They easily resist rust and corrosion and feature a highly polished finish that is made to last. Something that sets the ARIES 4 in. oval side bar apart from all others is its blended end caps and OE-style bends. Rather than capping our side bars with a plastic cap, we offer a blended end cap for a smooth, finished appearance. We also equip the ends with a special 20-degree bend and original equipment styling to perfectly contour to your vehicle. ARIES 4 in. oval side bars are fitted with raised step pads to provide a wide stepping surface. The polypropylene construction will not crack over time, and because it has a textured grip, the surface is highly resistant to slips and skids, even when wet. To add an extra element of class to our oval sides, we also fit each one with a stainless steel insignia bearing the ARIES name. Installation of ARIES 4 in. oval side bars is quick and easy with custom-fitted mounting brackets and no drilling necessary (NOTE: This set of side bars is compatible with DEF tank models).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2018 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | WT | Extended Cab Pickup | 262 |
- 3in. Round Black Stainless Side Bars; Select Silverado; Sierra 1500; 2500; 3500
- Includes Side Bars And Mounting Hardware; Stainless Steel; Semi-Gloss Black Powder Coat
- ARIES 214046 3-Inch Round Black Stainless Steel Nerf Bars; No-Drill; Fits Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD
- Aries 3 in. Round Side Bars
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Tube Shape: Round
-
Features:
- Unique Bends To Contour To The Body of The Vehicle
- Custom/ Non-Skid Step Pads For Safe Entry And Exit
- 3 in. Diameter/ Heavy-Wall Tube Design
- Stainless Steel Construction To Be Strong And Rust-Resistant
- Durable Semi-Gloss Black Powder Coat For Corrosion Resistance
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets For Solid Step
- Includes One Pair Of Side Bars And Mounting Hardware
- ARIES 3 in. round side bars are a reliable and budget-friendly option for side steps on your truck. This set of nerf bars offers solid rust resistance, a custom fit and a no-drill installation. Constructed from stainless steel, these 3 in. side bars are perfect for work or play, easily withstanding dirt, water, mud, sand, snow and road salt and maintaining dependable corrosion resistance even offroad. They also come with a durable semi-gloss black powder coat finish that greater enhances rust resistance, and helps keep the nerf bars looking clean in spite of minor scuffs and scratches. 3 in. diameter, heavy-wall tubing is used to construct the steps, providing excellent strength and rigidity for safe, comfortable entry and exit. These 3 in. round nerf bars also feature non-skid step pads to further enhance safety. The step pads are textured to increase traction, and they are custom-placed to match the door layout for a convenient step up right where you need it. To ensure the best fit and appearance on your truck, every set of 3 in. side bars is made vehicle-specific. This means the steps are bent to a specific contour to complement the shape of the vehicles rocker panels. It also makes for a much easier installation compared to any universal nerf bars or running boards. These particular 3 in. nerf bars are designed to fit specific years of the Chevy Silverado 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 HD or 3500 Classic and GMC Sierra 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 HD or 3500 Classic (see application info to verify fitment). ARIES side bars use heavy-duty, vehicle-specific brackets that mount using pre-existing factory holes to completely eliminate drilling from the installation process. This speeds up the install and helps avoid unnecessary modification to your vehicle. It also promotes a stronger, more rigid step for sure footing every time you climb into your truck.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2018 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | WT | Extended Cab Pickup | 262 |
- 3in. Round Black Stainless Side Bars; Select Silverado; Sierra 1500; 2500; 3500
- Includes Side Bars And Mounting Hardware; Stainless Steel; Semi-Gloss Black Powder Coat
- ARIES 214046 3-Inch Round Black Stainless Steel Nerf Bars; No-Drill; Fits Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD
- 3 in. Round Side Bars
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Tube Shape: Round
-
Features:
- Unique Bends To Contour To The Body of The Vehicle
- Custom/ Non-Skid Step Pads For Safe Entry And Exit
- 3 in. Diameter/ Heavy-Wall Tube Design
- Stainless Steel Construction To Be Strong And Rust-Resistant
- Durable Semi-Gloss Black Powder Coat For Corrosion Resistance
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets For Solid Step
- Includes One Pair Of Side Bars And Mounting Hardware
- ARIES 3 in. round side bars are a reliable and budget-friendly option for side steps on your truck. This set of nerf bars offers solid rust resistance, a custom fit and a no-drill installation. Constructed from stainless steel, these 3 in. side bars are perfect for work or play, easily withstanding dirt, water, mud, sand, snow and road salt and maintaining dependable corrosion resistance even offroad. They also come with a durable semi-gloss black powder coat finish that greater enhances rust resistance, and helps keep the nerf bars looking clean in spite of minor scuffs and scratches. 3 in. diameter, heavy-wall tubing is used to construct the steps, providing excellent strength and rigidity for safe, comfortable entry and exit. These 3 in. round nerf bars also feature non-skid step pads to further enhance safety. The step pads are textured to increase traction, and they are custom-placed to match the door layout for a convenient step up right where you need it. To ensure the best fit and appearance on your truck, every set of 3 in. side bars is made vehicle-specific. This means the steps are bent to a specific contour to complement the shape of the vehicles rocker panels. It also makes for a much easier installation compared to any universal nerf bars or running boards. These particular 3 in. nerf bars are designed to fit specific years of the Chevy Silverado 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 HD or 3500 Classic and GMC Sierra 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 HD or 3500 Classic (see application info to verify fitment). ARIES side bars use heavy-duty, vehicle-specific brackets that mount using pre-existing factory holes to completely eliminate drilling from the installation process. This speeds up the install and helps avoid unnecessary modification to your vehicle. It also promotes a stronger, more rigid step for sure footing every time you climb into your truck.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2018 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | WT | Extended Cab Pickup | 262 |
- 3in. Round Black Steel Side Bars; Select Silverado; Sierra 1500; 2500; 3500 HD
- Includes Side Bars And Mounting Hardware; Rocker Panel Mount; Carbon Steel; Semi-Gloss Black
- ARIES 204046 3-Inch Round Black Steel Nerf Bars; No-Drill; Fits Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD
- 3 in. Round Side Bars
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Tube Shape: Round
-
Features:
- Unique Bends To Contour To The Body of The Vehicle
- Custom/ Non-Skid Step Pads For Safe Entry And Exit
- 3 in. Diameter/ Heavy-Wall Tube Design
- High-Strength Carbon Steel Construction
- Rust-Resistant Semi-Gloss Black Powder Coat And E-Coat Finish
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets
- Includes One Pair Of Side Bars And Mounting Hardware
- ARIES 3 in. side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3 in. nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3 in. round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3 in. nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Chevy Silverado 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 Classic or 3500 HD and GMC Sierra 1500, 1500 Classic, 2500 HD, 2500 HD Classic, 3500 Classic or 3500 HD (see application info to verify fitment). ARIES 3 in. round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2018 - Chevrolet Silverado 1500 | V | - | 6 Cyl 4.3L | WT | Extended Cab Pickup | 262 |
Showing 1 - 10 of 25 products
Loading...