Image
Product
Price
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - GMC Sierra 1500 |
- Trailer Brake Controller Harness; Select Cadillac; Chevrolet; GMC (Packaged)
- Length 12 in. Install Time 5 Minutes
- CURT 51452 Quick Plug Electric Trailer Brake Controller Wiring Harness; Select Chevrolet Silverado; Suburban; Tahoe; GMC Sierra; Yukon; Escalade
- 4-Way Square Plug Wiring Extension
- Product Attributes:
- Install Time: 5 Minutes
-
Features:
- Allows Any Curt Brake Control To Be Plugged Into OEM Socket
- Quick Plug Harness Installs In Less Than Ten Minutes
- Wire Colors Match Standard Brake Control Harnesses
- Includes 24 In. Of 12 Gauge Wire For Flexible Installation
- Slit-Loom Sleeve Keeps Wires Contained And Protected
- Made In USA
- A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle's factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Cadillac Escalade, Escalade ESV, Chevy Silverado and GMC Sierra 1500, 1500 LD, 1500 Limited, 2500HD, 3500HD Suburban, Suburban 1500, Suburban 3500HD, Tahoe, Yukon and Yukon XL (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. Theyre also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - GMC Sierra 1500 |
- Speedometer Calibrator Color California Edition
- Tire Sizes 24-54 inches 1/4 inch increments Return Back To Stock DTCs Read and Clear Internet Updateable CARB E.O. D-260-42
- The Speedometer Calibrator can correct your computer readings for different tires and/or rear gear ratios.
- Product Attributes:
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2018 - GMC Sierra 1500 | V | - | FLEX | 6 Cyl 4.3L | H | 262 |
- Premier 6 Oval Nerf Step Bars
- 75" Long Requires Installation Kit 22-2015 Rocker Panel Mount Stainless Steel 6" Step
- Premier 6 Oval Nerf Step Bars. 75 in.. Polished Stainless. Does Not Include Mount Kit. Vehicle Specific Mount Kit Must Be Purchased Separately.
- Premier 6" Oval Nerf Step Bars
- Product Attributes:
- Bar Diameter (in.): 6" Oval
- Can Ship By Ground Delivery: Yes
- Color/Material: Polished Stainless Steel
- Bar Length: Cab Length
- Finish/Color: Stainless Steel
-
Features:
- Mount kit sold separately
- Extra wide 6" oval side step tubes
- Protects vehicle rocker panels from potential damage
- Injection molded polymer step pad
- Molded oval end caps
- Solid construction
- Vehicle specific mounting kit is sold separately
- Bolt-on installation - no drilling required on most applications
- Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and 91. To ensure a perfect fit Vehicle-Specific Mounting Kits are required and are purchased separately. Each mounting kit is exactly machined for a No-Drill Installation. The Black Powdercoated Mild Steel Bars are backed by a manufactures 3 year warranty and the Polished Stainless Steel Bars are backed by Westins exclusive Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Region | Body |
|---|---|---|
| 2018 - GMC Sierra 1500 | United States | Extended Cab Pickup |
- Ventvisor Deflector; Smoke; Outside Mount; 4 piece
- Ventvisor Deflector - Outside Mount, 4 piece
- Product Attributes:
- Mounting Hardware Included: Yes
- WEB: Style: Outside Mount
- WEB: Color: Smoke
- WEB: Material: Modified Acrylic
- Prop 65 Short Form Warning: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Engineered to fit your vehicle’s year, make, and model, this externally mounted side window de?ector features a curved designed that hugs the contours of your ride.
- Easily refresh the air in your cab without letting rain or weather in – just crack the window to remove stale, stubborn odors from things like pets, smoking or the kids dirty sports bags.
- Manufactured with high-grade UV resistant acrylic material that’s scratch resistant, car wash safe, and will never fade or discolor from exposure to the sun.
- Installation is a breeze
- no drilling or special hardware required – attach with the included 3M automotive grade adhesive and you’re ready to hit the road.
- Go with the original—AVS Ventvisor. Backed by our limited lifetime warranty.
- Made in the USA with global materials.
- Whether you’re winding your way through the scenic route or heading out for your morning commute, nothing makes it easier to enjoy the drive than the original Ventvisor by AVS. Externally mounted and made of impact-resistant acrylic, this curved side window de?ector will shield you from whatever weather comes your way. But it does more than just protect you from the elements – it refreshes your ride by circulating air and eliminating unwanted odors. When your cab gets musty or wet and your windows start to fog, just roll them down and air it out without worrying about the weather. The Ventvisor is made from ultra-tough materials with a UV resistant finish that refuses to fade, even after extended sun exposure. Its high-grade acrylic material is just the right thickness to be strong yet ?exible and comes precision-engineered to fit your vehicle’s year, make, and model. Installation is a breeze with no drilling or special hardware required – attach with the included 3M automotive grade adhesive and you’re ready to hit the road. Plus, it’s backed by a Limited Lifetime Warranty. Proudly made in the USA with global materials.
Additional Fitment Information:
| Vehicle | Region | Sub Model | Body |
|---|---|---|---|
| 2018 - GMC Sierra 1500 | United States | SLT | Extended Cab Pickup |
- 3.5 in. Lift Requires Cutting~Install Time 4-6 Hours~Includes The Following Parts~U-Bolts~Necessary Installation Hardware~Lifted Knuckles~Strut Spacers~2 Rear Premium N3 Series Shocks~2 Premium N2.0 Front Struts~Differential Skid Plate~3 in. Fabricated Lift Blocks~Does Not Fit Models w/Stock Cast Steel Control Arms
- Suspension Lift Kit w/Shocks; 3.5 in. Lift;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3.5 In.
- WARNING CA Proposition 65: No
-
Features:
- Increased Ground Clearance
- Increase Cv Boot Clearance w/Stamped Steel Lower Control Arm
- Retains Factory Suspension Components
- Levels Front w/Rear
- Fabricated Lift Blocks Are Stronger
- Offer A Longer Lifespan Than Cast Blocks
- Features Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- Strike the Perfect Balance: Not too tall, not too small-Rough Countrys 3.5 in. Lifted Knuckle Kit delivers the ideal blend of aggressive looks, enhanced ground clearance, and everyday drivability. Whether youre hitting the trails or cruising the highway, this all-inclusive lift kit gives your vehicle a bold stance and the performance to match.Advanced Suspension Engineering: This kit features precision-engineered lifted knuckles that retain your factory suspension components for dependable, hassle-free installation. Unlike standard kits that can expose your CV axle boots to stress and wear, Rough Countrys knuckle design repositions the CV axle for improved clearance from the lower control arm-dramatically reducing boot fatigue and protecting your drivetrain.Factory Rake Eliminated: Achieve a commanding, level profile with a front-to-rear stance that eliminates the factory rake. This not only enhances aesthetics but also improves your vehicles balance for confident handling on and off the road.Built to Go the Distance: Fabricated rear lift blocks outlast cast alternatives with superior strength and corrosion resistance. Whether youre tackling rocky trails or hauling gear, these rugged components are made to endure.Tailored Ride Performance: This kit includes Rough Countrys premium N3 shocks-10-stage variable valving, nitrogen-charged for the perfect fusion of off-road performance and on-road comfort. Want more? Its fully configurable with Rough Countrys full lineup of shocks and struts, including the high-performance Vertex reservoir upgrade.Peace of Mind Included: Rough Country backs this kit with a Limited Lifetime Replacement Guarantee, ensuring your suspension is ready for whatever comes next.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2018 - GMC Sierra 1500 | V | - | 6 Cyl 4.3L | SLE | 4WD | 262 |
- 3.5 in. Lift Requires Cutting~Does Not Fit Vehicles w/Magnetic Ride~Install Time 4-6 Hours~Includes The Following Parts~U-Bolts~Necessary Installation Hardware~Lifted Knuckles~Strut Spacers~2 Rear Premium N3 Series Shocks~2 Premium N2.0 Front Struts~Differential Skid Plate~3 in. Fabricated Lift Blocks~Does Not Fit Models w/Stock Cast Steel Control Arms
- Suspension Lift Kit w/Shocks; 3.5 in. Lift;
- Suspension Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3.5 In.
- WARNING CA Proposition 65: No
-
Features:
- Increased Ground Clearance
- Increase Cv Boot Clearance w/Stamped Steel Lower Control Arm
- Retains Factory Suspension Components
- Levels Front w/Rear
- Fabricated Lift Blocks Are Stronger
- Offer A Longer Lifespan Than Cast Blocks
- Features Application Valved N3 Series Shock Absorbers
- Offer The Best In Balanced Performance For On And Off-road Use
- Strike the Perfect Balance: Not too tall, not too small-Rough Countrys 3.5 in. Lifted Knuckle Kit delivers the ideal blend of aggressive looks, enhanced ground clearance, and everyday drivability. Whether youre hitting the trails or cruising the highway, this all-inclusive lift kit gives your vehicle a bold stance and the performance to match.Advanced Suspension Engineering: This kit features precision-engineered lifted knuckles that retain your factory suspension components for dependable, hassle-free installation. Unlike standard kits that can expose your CV axle boots to stress and wear, Rough Countrys knuckle design repositions the CV axle for improved clearance from the lower control arm-dramatically reducing boot fatigue and protecting your drivetrain.Factory Rake Eliminated: Achieve a commanding, level profile with a front-to-rear stance that eliminates the factory rake. This not only enhances aesthetics but also improves your vehicles balance for confident handling on and off the road.Built to Go the Distance: Fabricated rear lift blocks outlast cast alternatives with superior strength and corrosion resistance. Whether youre tackling rocky trails or hauling gear, these rugged components are made to endure.Tailored Ride Performance: This kit includes Rough Countrys premium N3 shocks-10-stage variable valving, nitrogen-charged for the perfect fusion of off-road performance and on-road comfort. Want more? Its fully configurable with Rough Countrys full lineup of shocks and struts, including the high-performance Vertex reservoir upgrade.Peace of Mind Included: Rough Country backs this kit with a Limited Lifetime Replacement Guarantee, ensuring your suspension is ready for whatever comes next.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2018 - GMC Sierra 1500 | V | 6162 | 8 Cyl 6.2L | Denali | 4WD | 376 |
- BD Chevy 2 Low UnLoc - 4wd 2015-2019 2500-3500 / 2014-2019 1500 / 2015-2020 SUV
- 4wd;
- BD Chevy 2 Low UnLoc - 2015-2019 2500-3500 4wd / 2014-2019 1500 4wd / 2015-2020 SUV 4wd
- 2 Low UnLoc
- Product Attributes:
- Category: Steering
- Engine: Gasoline
- Suggested Product: 1036627
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Installation is simple, the kit plugs in under the hood
- No wire cutting or splicing
- Kit comes with an illuminated rocker switch for control and to indicate when the front axle is being overridden
- Designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range
- By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels
- This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding
- With this kit installed, the front wheels will NOT be driven through the transfer case
- Allows to have full power and torque while in a high gear reduction applied to the rear axle(s) only
- Vehicle maneuverability is reduced while in 4WD. When the 2Low Unloc is turned on, you disable the front wheel drive mechanism allowing for full torque to be available to the rear wheels only. The front wheels will NOT be driven, delivering normal 2WD maneuverability while in low range! This will also allow for sharp "All The Way Over" turns without the front axle u-joint hopping or binding.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - GMC Sierra 1500 | V | 6162 | 8 Cyl 6.2L | 376 |
- Custom Towed-Vehicle RV Wiring; Select Silverado; Sierra 1500; 2500; 3500 HD
- For Dinghy Towing; Includes Harness/4-Flat Extension/Mounting Bracket And Hardware
- CURT 58967 Custom Towed-Vehicle RV Wiring Harness for Dinghy Towing; Fits Select Chevrolet Silverado; GMC Sierra 1500; 2500; 3500 HD
- Towed-Vehicle RV Harness
-
Features:
- Connects A Towed Vehicle To An Rv Using A Standard 4-Way Flat
- Eliminates The Need For Cutting/Splicing
- Block Diodes Isolate Vehicle Electronics From RV Signals
- Uses Towed Vehicle Existing Taillights Brake Lights/Turn Signals
- Towing your vehicle behind your RV is a great way to experience more of the adventure on your cross-country excursions. Whether youre towing a compact car or a full-size truck, CURT has the perfect solution to help you Bring It! CURT towed-vehicle RV harnesses are a vehicle-specific, plug-and-play solution to wiring your vehicle for dinghy towing. They use original-equipment-compatible connectors to plug into your vehicles wiring system without any cutting, splicing or soldering required. They provide a standard 4-way flat connector to plug into the RV socket and synchronize the vehicles tail lights, turn signals and brake lights with the RVs. Because each towed-vehicle RV harness has a vehicle-specific design, installation is fast and easy. This particular RV dinghy towing wiring harness is designed for specific years of the Chevy Silverado and GMC Sierra 1500, 1500 LD / Limited, 2500 HD and 3500 HD. CURT RV harnesses are also built to provide long-lasting operation. They feature integrated block diodes that protect the vehicles circuits from the RV signals. They isolate the sensitive vehicle electronics, keeping them from overheating and short circuiting. Every CURT towed-vehicle RV harness comes ready to install with all necessary hardware included. They also come with a 4-way flat extension to provide plenty of length to plug into the RV socket, as well as a connector mounting bracket to mount the connector on the vehicle.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - GMC Sierra 1500 |
- Lo Pro - 16-18 (19 Leg/Lim) Silv/Sierra 1500/16-19 2500HD/3500HD 8' with Sport Bar
- Black Sport Bar: With Sport Bar
- Lo Pro Tonneau Cover - Black - 2016-2018 (2019 Legacy/Limited) Chevy Silverado/GMC Sierra 1500/2016-2019 2500 HD/3500 HD 8' Bed with Sport Bar
- Product Attributes:
- Paintable: No
- Works w/Toolbox: No
- Front Opening: No
- Install Time: 15 Minutes
- Key Lockable: No
- Full Bed Access: No
- Rails To Install: Yes
- Low Profile: Yes
- Sits on Truck Rails: No
- Actual Color: Black
-
Features:
- Signature Low-Profile Design
- Cover Sits Only 3/4 in. Above The Truck Bed
- Trouble-Free Install And Use No Drilling Or Special Tool Required
- Anodized Single Trigger Latch
- Requires Only One Finger To Open The Cover
- Quick-Release System
- The Entire Cover Can Be Removed In Seconds Without Tools
- True 100 Percent Full Bed Access
- Industrial Strength Leather-Grain Vinyl Is Tear Resistant
- Protects Your Cargo From The Harshest Of Elements
- Made In The USA
- Lifetime Warranty
- A sleek, low-profile design is the signature of the Lo Pro. Heavy-duty construction and the patented automatic tension control keep the cover looking great in any weather condition. The Lo Pro mounts inside the rails of the truck bed, providing full access to stake pocket holes for use with additional accessories. Stylish design, simple functionality and durable bed protection are what make the Lo Pro North America's #1 selling roll-up truck bed cover.
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2018 - GMC Sierra 1500 | United States | 97.8 |
Showing 1 - 10 of 11 products
Loading...