Shop By Product Matching "Whiteline"
Choose your Submodel for your 2005 Subaru Legacy
Image
Product
Price
- Inserts - suits 5 speed manual models - installs into voiding of original rear gearbox mount - positive gearbox location
- Whiteline Gearbox - mount bushing.
- Gearbox - mount bushing
-
Features:
- Inserts are designed to work with the original factory bushing rather than replacing it.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Factory Transmission mounts are built for comfort and the heavily voided Subaru transmission mounts are no exception. Reduce the lag in your shift response and feel by removing the slop from the rubber transmission mounting by inserting Whiteline's low compliance polymer insert. Designed to fill the voided areas in the transmission mount this achieves a crisp feel through gear changes and on/off throttle applications.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2005 - Subaru Legacy | Limited |
- Roll center/bump steer - correction kit
- Reduces roll/bump steer - essential for lowered cars
- Whiteline Roll centre/bump steer - correction kit.
- Roll centre/bump steer - correction kit
-
Features:
- Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
- Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- A must for lowered vehicles, Whiteline roll center and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip and cornering speeds.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2005 - Subaru Legacy | Limited |
- Roll center/bump steer - correction kit
- Reduces roll/bump steer - essential for lowered cars
- Whiteline Roll centre/bump steer - correction kit.
- Roll centre/bump steer - correction kit
-
Features:
- Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
- Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- A must for lowered vehicles, Whiteline roll center and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip and cornering speeds.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2005 - Subaru Legacy | Front | United States | Limited |
- Inserts - suits manual models - installs into voiding of original rear gearbox mount - positive gearbox location
- Whiteline Gearbox - mount bushing.
- Gearbox - mount bushing
-
Features:
- Inserts are designed to work with the original factory bushing rather than replacing it.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Factory Transmission mounts are built for comfort and the heavily voided Subaru transmission mounts are no exception. Reduce the lag in your shift response and feel by removing the slop from the rubber transmission mounting by inserting Whiteline's low compliance polymer insert. Designed to fill the voided areas in the transmission mount this achieves a crisp feel through gear changes and on/off throttle applications.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2005 - Subaru Legacy | Front | United States | Limited |
- Sway bar - mount bushing
- Front
- Whiteline Sway Bar Bushings - 21mm
- Sway Bar Mount Bushing Kit - 21mm
- Product Attributes:
- Inside Diameter: 21
- Grease Fitting Included: No
- Grade Type: Regular
- Mounting Hardware Included: No
-
Features:
- Designed with the installer in mind by reducing the need of specialized skills, tools and equipment
- Internal grease reservoirs provide continual self lubrication for optimum friction management
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life
- Whiteline formulation boasts resistance to oil, grease, ozone and weathering
- Designed to fit a 21mm sway bar. Whiteline's sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Backed up by a Limited Lifetime Warranty. Whiteline bushings are made from the highest quality elastomers and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Subaru Legacy | Front | Limited |
- 14mm - adds +/- 1.5deg camber
- Whiteline Camber adjusting - bolt.
- Camber adjusting - bolt
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2005 - Subaru Legacy | Front | United States | Limited |
- Camber adjusting - bolt
- 14mm - adds +/- 0.75 deg camber
- Whiteline Camber adjusting - bolt.
- Camber adjusting bolt 14mm
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Subaru Legacy | Front | Limited |
- Sway bar - link
- Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm.
- Whiteline Sway bar - link.
- Adjustable Sway Bar End Link Set
- Product Attributes:
- Grade Type: Performance
-
Features:
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Subaru Legacy | Rear | Limited |
- Adjustable Extra Heavy Duty
- Whiteline Sway bar - link.
- Sway bar - link
- Product Attributes:
- Grade Type: Performance
-
Features:
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2005 - Subaru Legacy | Front | United States | Limited |
Showing 1 - 9 of 9 products
Loading...