Image
Product
Price
- Inserts - suits 5 speed manual models - installs into voiding of original rear gearbox mount - positive gearbox location
- Whiteline Gearbox - mount bushing.
- Gearbox - mount bushing
-
Features:
- Inserts are designed to work with the original factory bushing rather than replacing it.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Factory Transmission mounts are built for comfort and the heavily voided Subaru transmission mounts are no exception. Reduce the lag in your shift response and feel by removing the slop from the rubber transmission mounting by inserting Whiteline's low compliance polymer insert. Designed to fill the voided areas in the transmission mount this achieves a crisp feel through gear changes and on/off throttle applications.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - Subaru WRX | Base |
- Inserts - suits manual models - installs into voiding of original rear gearbox mount - positive gearbox location
- Whiteline Gearbox - mount bushing.
- Gearbox - mount bushing
-
Features:
- Inserts are designed to work with the original factory bushing rather than replacing it.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Factory Transmission mounts are built for comfort and the heavily voided Subaru transmission mounts are no exception. Reduce the lag in your shift response and feel by removing the slop from the rubber transmission mounting by inserting Whiteline's low compliance polymer insert. Designed to fill the voided areas in the transmission mount this achieves a crisp feel through gear changes and on/off throttle applications.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2012 - Subaru WRX | Front | Mexico | Base |
- Control arm - lower arm assembly (camber/toe correction) MOTORSPORT
- Complete new rear arms with +/- 2.5 deg camber adjustment
- Whiteline Control arm - lower arm assembly (camber/toe correction) MOTORSPORT.
- Control arm - lower arm
- Product Attributes:
- Ball Joint Included: N
- Adjustable: Y
- Grade Type: Performance
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Adjustable lower control arms feature a light weight (1.72kg/3.8lbs per complete arm) stamped steel design. Adjusts via cam bolt and eccentric bushing for in-field adjustment versatility.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2012 - Subaru WRX | Rear | Mexico | STI |
- Control arm - lower arm assembly (camber/toe correction) MOTORSPORT
- Complete new rear arms with +/- 2.5 deg camber adjustment
- Whiteline Control arm - lower arm assembly (camber/toe correction) MOTORSPORT.
- Control arm - rear lower arm
- Product Attributes:
- Ball Joint Included: N
- Adjustable: Y
- Grade Type: Performance
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Adjustable lower control arms feature a light weight (1.72kg/3.8lbs per complete arm) stamped steel design. Adjusts via cam bolt and eccentric bushing for in-field adjustment versatility.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Subaru WRX | Rear | STI |
- 14mm - replaces lower bolt < -3.0deg - MOTORSPORT
- Whiteline Camber adjusting - bolt.
- Camber adjusting - bolt
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2012 - Subaru WRX | Front | Mexico | STI |
- Camber adjusting - bolt
- 14mm - adds +/- 0.75 deg camber
- Whiteline Camber adjusting - bolt.
- Camber adjusting bolt 14mm
-
Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline 14mm camber bolts provide the largest adjustment range of up to +/- 0.75deg Unlike other "friction" lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Subaru WRX | Front | STI |
- Roll center/bump steer - correction kit
- Reduces roll/bump steer - essential for lowered cars
- Whiteline Roll centre/bump steer - correction kit.
- Roll centre/bump steer - correction kit
-
Features:
- Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
- Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- A must for lowered vehicles, Whiteline roll center and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip and cornering speeds.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - Subaru WRX | STI |
- Roll center/bump steer - correction kit
- Reduces roll/bump steer - essential for lowered cars
- Whiteline Roll centre/bump steer - correction kit.
- Roll centre/bump steer - correction kit
-
Features:
- Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
- Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- A must for lowered vehicles, Whiteline roll center and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip and cornering speeds.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2012 - Subaru WRX | Front | Mexico | STI |
- Sway bar - link
- Adjustable Extra Heavy Duty. Length 65-70mm. Bolt Diameter 10mm.
- Whiteline Sway bar - link.
- Adjustable Sway Bar End Link Set
- Product Attributes:
- Grade Type: Performance
-
Features:
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Subaru WRX | Rear | STI |
- Adjustable extra heavy duty
- Whiteline Sway bar - link.
- Sway bar - link
- Product Attributes:
- Grade Type: Performance
-
Features:
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Additional Fitment Information:
| Vehicle | Position | Region | Sub Model |
|---|---|---|---|
| 2012 - Subaru WRX | Front | Mexico | STI |
Showing 1 - 10 of 10 products
Loading...