Image
Product
Price
- Yukon Rear Axle Bearing/Seal Kit for GM
- 8.6 in. 10 Bolt; Torrington Brand; 2.800 in. OD. GM 8.6 in.; Torrington Brand; 2.800 in. OD.~GM 9.5 in.; 14 bolt cover; Torrington Brand; 2.800 in. OD.
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- 2.800 in. Outer Diameter
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Chevrolet Tahoe | Rear |
- Yukon Master Overhaul kit for 99-08 GM 8.6in. differential.
- 8.6 in. 10 Bolt; Pin/Car Brngs; Inst GM 8.6 in.; Pin/Car Brngs; Inst~GM 8.6 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; Uses M802048 Inner Pinion Bearing
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known In The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov
- Model: Gm 8.6 In.
-
Features:
- Fits 1999-2008 GM 8.6 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2002 - Chevrolet Tahoe | LT | 4WD |
- Yukon Rear Axle Bearing/Seal Kit for GM
- 8.6 in. 10 Bolt; Torrington Brand; 2.800 in. OD. GM 8.6 in.; Torrington Brand; 2.800 in. OD.~GM 9.5 in.; 14 bolt cover; Torrington Brand; 2.800 in. OD.
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- 2.800 in. Outer Diameter
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2002 - Chevrolet Tahoe | Rear | LT |
- Yukon Master Overhaul kit for 99-08 GM 8.6in. differential.
- 8.6 in. 10 Bolt; Pin/Car Brngs; Inst GM 8.6 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; Uses M802048 Inner Pinion Bearing~GM 8.6 in.; Pin/Car Brngs; Inst
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known In The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov
- Model: Gm 8.6 In.
-
Features:
- Fits 1999-2008 GM 8.6 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2002 - Chevrolet Tahoe | V | 5328 | 8 Cyl 5.3L | RWD | 325 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 in./8.6 in. 10 Bolt; 3.73 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio~GM 8.6 in.; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
26066706
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2002 - Chevrolet Tahoe | V | 5328 | Front | 8 Cyl 5.3L | RWD | 325 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 in./8.6 in. 10 Bolt; 3.73 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio~GM 8.6 in.; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2002 - Chevrolet Tahoe | V | 5328 | Rear | 8 Cyl 5.3L | RWD | 325 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 And 8.6 in. Ring Gear; 3.73 Ratio GM 8.6 in.; 3.73 Ratio~GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2002 - Chevrolet Tahoe | V | - | Rear | 8 Cyl 4.8L | LT | 4WD | 294 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 And 8.6 in. Ring Gear; 3.73 Ratio GM 8.6 in.; 3.73 Ratio~GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2002 - Chevrolet Tahoe | V | - | Front | 8 Cyl 4.8L | LT | 4WD | 294 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 And 8.6 in. Ring Gear; 3.73 Ratio GM 8.6 in.; 3.73 Ratio~GM 8.5 and 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2002 - Chevrolet Tahoe | V | - | Front | 8 Cyl 4.8L | LT | 4WD | 294 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 And 8.6 in. Ring Gear; 3.73 Ratio GM 8.6 in.; 3.73 Ratio~GM 8.5 and 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2002 - Chevrolet Tahoe | V | - | Rear | 8 Cyl 4.8L | LT | 4WD | 294 |
Showing 1 - 10 of 21 products
Loading...