Shop By Product Matching "Zone Offroad"
Image
Product
Price
- Add-A-Leaf Kit
- Jack / Jack Stands
- Need a little extra boost in the rear of your truck? This add-a-leaf kit will provide additional lift in the rear while maintaining ride quality and increasing load capacity.
- In the box: Add-A-Leaf's Center Pins Leaf Spring Alignment Clamps
- Product Attributes:
- Horizontal Position: Rear
- Number of Leafs: 1
- Pin Size: 9/16"
- Center Pin Size: 0.375
- Free Height: 6.75
-
Features:
- Includes a pair of add-a-leafs, center pins, and alignment clamps
- Retains ride quality while increasing ride height and load capacity
- Includes easy to follow instructions
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Chevrolet Silverado |
- 6.5" Lift Kit with Replacement Strut
- Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2018. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum. Is your truck a crew cab? Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference. Fitment: All wheel drive models may require front CV driveshaft. See installation instructions for more information. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing. Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing.
- Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers, skid plates and steering knuckles to Nitro series gas struts for improved performance with a lifted and leveled out stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires.
- Product Attributes:
- Front Lift Method: Replacement Strut
- Cutting Required: Yes
- Wheel Size: 20 X 9
- Max Tire Size 3: 35 X 12.5
- Back Spacing: 5-5.75"
- Front Lift Height: 6.5"
- Max Tire Size 2: 35 X 12.5
- Lift Type: Lift Kit
- Rear Lift Method: Cast Blocks
- Welding Required: Yes
- Wheel Size 2: 18 X 9
- Wheel Size 3: 17 X 9
- Accommodates Factory Wheels: See Notes
- Rear Lift Height: 5"
- Back Spacing 2: 5"-5.25"
- Back Spacing 3: 5"
-
Features:
- Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.FMVSS No.126 compliant to work with your vehicle's stability &
- traction control systems without lighting up your dash like a Christmas tree.High-strength, 1/4" steel construction crossmembers and ductile iron steering knuckles to optimize operating angles.Nitro series full length gas struts improve ride quality and offroad damping.Multi-point differential relocation brackets and heavy duty skid plate improve CV operating angles and offer added protectionKits are proudly made in the USA.
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2016 - Chevrolet Silverado | 4WD |
- 2" Leveling Kit
- Factory wheel/tire combo; Factory 20s with 1/4" wheel spacer with tire size provided in tire sizing chart for 20" wheels. Fitment: Fender Trim Plate Accessories will NOT fit 2007- 2013 model years. Fitment: Will NOT fit 2007 "Classic" models. If you have a 2007 Classic, see kits for comparable 1999-06 models. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Fitment: Will not fit vehicles equipped with Auto-Ride.
- Level out the stance on your Chevrolet/GMC 1500 truck or SUV with these 2" lower strut spacers from Zone Offroad. Designed for quick and easy install along with a precision fit, this kit includes a pair of spacers as well as longer mounting hardware to allow clearance for up to 33" tires.
- In the box: All Necessary Mounting / Installation Hardware Strut Spacer - Front
- Product Attributes:
- Lift Type: Leveling Kit
- Front Lift Method: Strut Spacers
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 2"
-
Features:
- Fast and Easy Install
- Solid One-Piece Design
- No Strut Compressor Required and No Disassembly of the Strut
- Does not Change Your Factory Ride
- Easy to Follow Instructions Included
- Great Warranty
- Essentially corrosion proof to outlast your vehicle
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Chevrolet Silverado |
- 2" Lift Kit
- Fitment: Will NOT fit 2007 "Classic" models. If you have a 2007 Classic, see kits for comparable 1999-06 models. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Fitment: Will not fit vehicles equipped with Auto-Ride.
- Looking to lift your Chevrolet/GMC 1500 truck but retain the tail high stance. This 2" lift kit from Zone Offroad is designed for quick and easy install using a pair of 2" lower strut spacers, 2" rear lift blocks, U-bolts and hardware to allow clearance for up to hardware to allow clearance for bigger tires.
- In the box: Rear Lift Blocks U-Bolts - Rear Torsion Bar Keys
- Product Attributes:
- Lift Type: Lift Kit
- Rear Lift Method: Block Kit
- Welding Required: No
- Is Adjustable: No
- Front Lift Method: Strut Spacers
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Rear Lift Height: 2"
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 2"
-
Features:
- bolt-on design for easy installation.
- Castings are resonance frequency tested to ensure they are defect-free and ready to withstand any abuse.
- Rear lift block and longer U-bolts for easy installation. Maintains a tail high stance.
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Chevrolet Silverado |
- Adventure Series Upper Control Arm Kit
- Designed for vehicles with OE stamped steel or aluminum control arms, will NOT fit vehicles with OE cast steel arms. Kit includes (2) control arms, driver and passenger side. Tires wider than 285/70r17 cannot be installed on factory wheels due to clearance issues to the steering knuckles.
- Upgrade your truck's factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are designed for 14-18 Chevrolet/GMC 1500 trucks and SUVs with factory stamped steel or aluminum control arms. These arms are built from high strength steel, boxed, gusseted and fully welded for strength and rigidity. At the frame mount they use OE style rubber bushings for a long service free life and quiet operation. At the other end these arms feature an indexed ball joint cup designed for use with leveling and lifted applications. High strength ball joints are used with a protective ball joint cap to keep debris out. These upper control arms come fully assembled and ready to bolt in right out of the box.
- In the box: Control Arms
- Product Attributes:
- For Use With Lift Heights: 0-3"
- Vertical Position: Upper
- Horizontal Position: Front
- Welding Required: No
- Is Adjustable: No
- Cutting Required: No
-
Features:
- Designed for trucks with factory stamped steel or aluminum control arms*
- Improved strength with fully welded plate steel construction
- CNC machined ball joint cup with improved positioning ideal for use with leveling/lift kits
- High quality greaseable ball joints with a protective cap to keep out dirt/debris
- OE style rubber bushings for durability and maintenance-free operation
- Fully assembled and ready to install
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle |
|---|
| 2016 - Chevrolet Silverado |
Showing 1 - 5 of 5 products
Loading...