Image
Product
Price
- Champion Copper Plus Small Engine- Boxed - H10C
- Non-Resistor Type Gap 0.030in ; Plug Type H10C
- Champion Copper Plus Small Engine 844 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.438
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Manufacturer Heat Range: 10
- Pre-Gap Size:
- 0.030
- 0.78
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Resistor Type: No
- Plug Type: H10c
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14L7, 3B6583, 4504290, 45L, AL5, AL7, AL7C, AL7X, AL9, AL9X, ATL8, B4L, B6L, B6LY, C45L, H10C, M44L, SF21F...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1940 - Ford Standard | V | 2229 | 8 Cyl 2.2L | 136 |
- Front and Rear Floor Mats
- Thermoplastic Elastomer; Black; 4 pcs
- UNIVERSAL-FRONT AND REAR FLO
- Uni-Fit Floor Mats
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- No Hassle Lifetime Guarantee
- Made In The USA
- Extra Thick Driver Heel Pad Provides Years Of Life
- High Perimeter Sides Contain Spills And Debris
- Raised Ridges Keep Your Feet Out Of Water Mud And Dirt
- Easily Cleaned
- With Patented Nibs On The Reverse Side To Keep Mat From Shifting
- Husky Liners Uni-Fit all-weather floor mats are soft underfoot, but ultra-strong to standup to whatever you hurl at em. The center channel funnels mud, snow and other liquids into the recessed ribs, containing the mess, until you can yank, dump, wash and repeat.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1940 - Ford Standard | Front and Rear |
- with Green Coolant
- PEAK OET North American Conventional Green 50/50 Pre-diuted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1940 - Ford Standard |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1940 - Ford Standard |
- Autolite 216 Copper Non-Resistor Spark Plug
- OE Style; .030 Gap
- Copper Non-Resistor Spark Plug
- Product Attributes:
- Center Electrode Design: Standard / Regular
- Seat Type: Flat
- Electrical Terminal Type: Stud
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Resistor Type: No
- Insulator Material: Ceramic
- Hex Size:
- 13/16"
- 21
- Reach:
- 0.433
- 11.0
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Tapered
- Insulator Type: Short
- Pre-Gap Size:
- 0.030
- 0.80
- Ground Electrode Core Material: Nickel
- Autolite® Copper Spark Plugs are manufactured to deliver quick starts, improved fuel economy and smooth acceleration. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and Original Equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
19157983, 3035, 3112, 45L, 512, AL11, H8B
Additional Fitment Information:
| Vehicle |
|---|
| 1940 - Ford Standard |
- Black; Front Mount; 90 Amp.; 65 Idle; 12V
- PowerGEN Alternator; Black; Front Mount; 90 Amp.; 65 Idle; 12V;
- PowerGEN Alternator
- Product Attributes:
- Amperage: 90 Amp
-
Features:
- Keep Your Correct Vintage Look And Gain Modern Performance
- 90 Plus Amps At Top End/65 Plus Amps At Idle
- Easy To Install 1-Wire Internally Regulated
- Individually Dyno Tested with Proof of Performance Guarantee
- Designed To Fit Like Front Mount Generator
- Wiring Instructions Included
- One wire operation. Heavy duty regulator. 90 amps and 65 amps idle. Designed to fit generator bracketry.
Additional Fitment Information:
| Vehicle |
|---|
| 1940 - Ford Standard |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1940 - Ford Standard |
- Tie Rod End
- 3.22 (in) Length Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES416L Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Counterclockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.687
- End 2 Gender: Male
- Length - Stud Center to End: 3.120
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1940 - Ford Standard | Drag Link End |
- Tie Rod End
- 3.22 (in) Length Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES416L Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Counterclockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.687
- End 2 Gender: Male
- Length - Stud Center to End: 3.120
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-81034, 11A3271, 269-2068, 269-2085, 269-2240, 310220, 346754C92, 381034, 401-1096, 401-1096B, 45A0096, 46A0096A, 534-755, 626.65304, 802-416L, 868292R91, 8M3270, A0AZ-3A131A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1940 - Ford Standard | Left Outer |
- Tie Rod End
- 3.22 (in) Length Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES416R Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 1 Thread Direction: Clockwise
- End 1 Gender: Male
- End 1 Thread Diameter: 0.687
- End 2 Gender: Male
- Length - Stud Center to End: 3.120
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
03-81005, 11A3270, 180381M91, 269-2241, 310221, 381005, 401-1097, 401-1097B, 45A0097, 46A0097A, 534-756, 612.65009, 802-416R, A0AZ-3A130A, C1UZ-3A130A, C6TA3289C, ES291R, ES416R...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1940 - Ford Standard | Right Outer |
Showing 1 - 10 of 18 products
Loading...