Image
Product
Price
- Oil Filter
- H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut~Excludes 1 Quart Cartridge Type
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.6 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
021115351A, 102318005, 102618005, 111836, 11436936, 11711396, 121965, 1220185, 1220325, 1220893, 122B185, 122P185, 126385A1, 12662862, 129009, 12H3274, 132023, 1336188C1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1971 - Dodge B200 Van | V | - | 8 Cyl 5.9L | 360 |
- Tapered Roller Bearing Cone and Cup Assembly
- Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Front Brake | Drive Type |
|---|---|---|---|
| 1971 - Dodge B200 Van | Front Inner | Drum | RWD |
- ANCO Conventional 31 Series Wiper Blades 16
- Original Blade Type
- ANCO 31-Series Wiper Blade (Pack of 1)
- 31-Series
- Product Attributes:
- Adapters Required: No
- Pressure Point Quantity: 6
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: J-hook: 9x3mm; Classic Side-pin: 3/16"; Classic Bayonet: 7mm
- Blade Material: Duraklear - Natural Rubber
- Frame Material: Metal; Plastic
- Blade Type: Conventional/bridge
- Refillable: Yes
- The 31-Series KwikConnect wiper blade boasts reliable wiper performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-7075205, 14008193, 16-1, 16-2, 16-51, 16-52, 1623088-C1, 1668394, 1690023-C91, 170397, 1704770, 1707397, 1708044, 22122111, 2580416, 2580417, 2771906, 2889847...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Dodge B200 Van | Front |
- 16" TRICO Exact Fit Wiper Blade
- With hole on side of blade
- 9mm Hook, 3/16" Side Lock, 7mm Bayonet
- TRICO Exact Fit
- Provides original factory quality for vehicles with metal conventional wipers
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Dodge B200 Van | Front |
- Engine Valve Lifter
- with 2 Grooves; Hydraulic Lifter
- Sealed Power HT-2011 Lifter (Pack of 4)
- Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today's modern engines.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
This Part Fits the Following OEM/Substitute Numbers:
213-1679, 3004643, 3160304, 3172303, 3180454, 3189883, 3190810, 3190901, 3222276, 3577092, 3614320, 3614321, 362011, 387095C1, 4049338, 446571C1, 4740269, 5301 0574AB...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1971 - Dodge B200 Van | V | 5211 | 8 Cyl 5.2L | 318 |
- Champion Copper Plus- Boxed - RN14YC
- Gap 0.035in; Plug Type RN14YC Actual OE Part
- Champion Copper Plus 405 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Rn14yc
- Hex Size:
- 0.813
- 20.650
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 14
- Pre-Gap Size:
- 0.035
- 0.90
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1971 - Dodge B200 Van | L | 3254 | 6 Cyl 3.2L | 198 |
- Champion Copper Plus- Boxed - RN14YC
- Gap 0.035in; Plug Type RN14YC Actual OE Part
- Champion Copper Plus 405 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Classification: Champion Copper Plus
- Resistor Type: Yes
- Plug Type: Rn14yc
- Hex Size:
- 0.813
- 20.650
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Manufacturer Heat Range: 14
- Pre-Gap Size:
- 0.035
- 0.90
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14G52, 14G82, 14GR52, 4020, 4221, 44NS, 44XLO, 44XLS, 45NS, 45XLS, 46XLS, 7911, 7913, 82300317, AG82, AGR82, BP4ES, BPR2ES...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1971 - Dodge B200 Van | V | 5211 | 8 Cyl 5.2L | 318 |
- 16" TRICO Tech Beam Blade
- 9mm Hook, 9x4 Hook, 3/16" Side Lock, 7mm Bayonet, Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- TRICO Tech
- All-weather durability
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Dodge B200 Van | Front |
- ANCO Beam Contour Wiper Blade 16
- ANCO Contour Wiper Blade (Pack of 1)
- Contour
- Product Attributes:
- Adapters Required: No
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: J-hook: 9x3mm; Classic Side-pin: 3/16"; Classic Bayonet: 7mm
- Blade Material: Duraklear Plus - Natural Rubber
- Frame Material: Steel; Plastic; Rubber
- Blade Type: Beam
- Refillable: No
- This profile blade gives you reliable premium all-season performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16-160, 25-160, 416A, 601643, 8-916, DLF16, U-16
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Dodge B200 Van | Front |
- NGK V-Power Spark Plug
- Gap 0.035"
- V-Power Spark Plug
- Product Attributes:
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Center Electrode Core Material: Copper
- Part Number: Gr4
- Hex Size: 13/16
- Reach: .75
- Center Electrode Tip Material: Nickel
- Stock Number: 2635
- Ground Electrode Tip Design: Standard
- Manufacturer Heat Range: 4
- Ground Configuration: Standard
- Pre-Gap Size: .040
- Resistance: 5000
- Insulator Height: 55.00
- Ground Electrode Core Material: Nickel
- NGK Spark Plugs (U.S.A.), Inc. is the largest OE supplier and manufacturer of spark plugs for domestic and import vehicles in North America. Its OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist. With over 80 years of automotive expertise NGK has built a reputation for quality and reliability; manufacturing spark plugs for virtually every automotive, motorcycle, marine and small engine application. We are committed to be the premier partner with our customers, while maintaining original equipment standards for the highest durability and operational performance. With state-of-the-art manufacturing, inventory and distribution facilities in North America and across the globe, NGK is dedicated to providing customers with world-class products and services.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1765194, 2585, 2635, 3031, 3205, 3206, 3207, 405, 41-813, 4404, 65, 65BP, 65DP2, 7506, 7507, 7512, 7513, 7522...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1971 - Dodge B200 Van | V | 5211 | 8 Cyl 5.2L | 318 |
Showing 1 - 10 of 394 products
Loading...