Image
Product
Price
- Thermostat-195 Degrees
- Temperature 195F Includes thermostat and seal OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T57E, 14209, 15209, 1601-24339, 208, 33849, 340-195, 34095, 34299, 35209, 4209, 4495721, 4573560, 4573560AB, 4573560AE, 4663565, 5278144AA, 9340195...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chrysler Cirrus | L | 2429 | 4 Cyl 2.4L | 148 |
- Fuel Cap
- Vented Black Cap
- Standard
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-290315, 10838, 10838D, 10838Y, 10842, 11838, 11838Y, 12F60, 16447000030, 1644700030, 1644700130, 1664700030, 1664705800, 1711A004, 172511LA0B, 172511PA0B, 172515M000, 172519AA0A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chrysler Cirrus | L | 2429 | 4 Cyl 2.4L | 148 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Chrysler Cirrus |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Chrysler Cirrus |
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Fuel Delivery Type | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 2001 - Chrysler Cirrus | V | 2736 | GAS | 6 Cyl 2.7L | FI | Limited | U | Naturally Aspirated | 167 |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 43 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Bolt; 1 Nut; 1 Snap Ring; 1 Zerk Fitting
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Greaseable: Yes
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Attachment Type: Pinch Bolt
- Adjustable: No
- Stud Thread Diameter: 12
- Suspension Grade Type: Standard
- Bolts/Studs Included: No
- Bearing Material: Metal
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1015003, 610.63006, FA2222, GK7449, JBJ982, K7449, MK7449, MR554376, SK7449, TC2906
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2001 - Chrysler Cirrus | Front Lower | Coupe |
- Suspension Ball Joint
- Non-Adjustable
- Product Attributes:
- Housing Press Fit Diameter: 37.9 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Lock Nut; 1 Dust Boot; 1 Clip
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Greaseable: No
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bolts/Studs Included: No
- Bearing Material: Polymer
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
45D0106, 4879225AA, 610.63005, FA2178, GK7346, JBJ859, K-7218, K7346, MK7346, SK7346, TC5711
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2001 - Chrysler Cirrus | Rear Upper | Sedan |
- Steering Tie Rod End
- Product Attributes:
- Grease Fitting Included: No
- Mounting Hardware Included: Yes
- Package Contents: 1 Steering Tie Rod End; 1 Nut
- Length: 320
- End 1 Gender: Male
- Housing Material: Steel
- End 2 Gender: Male
-
Features:
- Trustworthy replacement - this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications
- Durably designed - factory-sealed and precision-forged housing resists future corrosion
- Reliably engineered - built to decrease wear rate and ensure overall strength
- Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
- This steering tie rod end directly replaces the original equipment tie rod on specific vehicle applications. It has undergone an industry-leading evaluation process to ensure smooth, safe operation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1014844, 1315007, 45A2124, 612.46015, ES3607, EV457, GEV457, JAR1136, MEV457, MR519046, SEV457, TA5405
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2001 - Chrysler Cirrus | Front Inner | Coupe |
- Thermostat-180 Degrees
- Temperature 180F Includes thermostat and seal Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 1.81
- Flange Thickness: 0.05 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T57D, 1601-24338, 180-043, 340-180, 34080, 4208, 9340180, NI, P4208
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chrysler Cirrus | L | 2429 | 4 Cyl 2.4L | 148 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.31 In
- Shell Diameter: 2.72 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
0457 3497AB, 10111, 11111, 12C12, 14111, 2078-290325, 31118, 4573497, 4573497AB, 4621875, 4648831AA, 4648832AA, 4648832AB, 4666082AA, 4667724, 4667827, 4777536, 4884739AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2001 - Chrysler Cirrus | L | 2429 | 4 Cyl 2.4L | 148 |
Showing 1 - 10 of 95 products
Loading...