Image
Product
Price
- Engine Coolant Reservoir Cap
- Relief pressure 15 lb
- Standard
- Product Attributes:
- Valve Outside Diameter: 1.20 In
- Maximum Pressure: 18
- Pressure Release Lever: No
- Vented:
- Vented
- Yes
- Filler Neck Outside Diameter: 1.98 In
- Filler Neck Inside Diameter: 1.20 In
- Attachment Type: Threaded
- Shape: Round
- Cap Depth: 1.50 In
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Pressurized: Yes
- Lever Type: No
- Cap Finish: Matte Black Plastic
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Shell Diameter: 2.53 In
- Filler Neck Height: 0.50 In
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10248, 10248ST, 10575118, 11248, 12R27, 13502354, 15042975, 15066786, 15075118, 1678-290343, 17046, 20898801, 22652695, 22671020, 31532, 703-1711, 7046, 902-5601...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Chevrolet Silverado 2500 | V | 5328 | 8 Cyl 5.3L | 325 |
- Thermostat-187 Degrees
- Temperature 187F Includes seal OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.2
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.58 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 2.12 In
- Temperature (Degree): 187
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T033E, 131-160, 15158, 1601-317694, 34198, 34198S, 455808, 46158, 48290, 523-190, 52387, 89018168, 9523190, P52387, QRT49
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Chevrolet Silverado 2500 | V | - | 8 Cyl 4.8L | 294 |
- New Nippondenso 10S20F Compressor with Clutch
- ; with 10S17F Compressor New with Clutch Replacement of Stretch Fit Belt is Required May Require use of OE Manifold; DeSlugger Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor Replacement of Stretch Fit Belt is Required New Part
- New Nippondenso 10S20F Compressor with Clutch
- New Compressor
- Product Attributes:
- : 4.250
- Compatible Refrigerant Oil Type: Pag 46
- Refrigerant Type: R134a
- Clutch Included: Yes
- New or Reman: New
- Discharge Port Type: Sealing Washer
- Printed Foot Note: May Require Use Of Oe Manifold; Deslugger [36141] Recommended To Eliminate Compressor Damage On Vehicles With Low Mount Compressor
- Suction Port Type: Sealing Washer
- Mounting Hardware?: Not Included
- O-Ring B Number/Desc: [24402] / Slimline Washer
- O-Ring A Number/Desc: [24404] / Slimline Washer
- Pulley Diameter MM: 107.950
- Compressor Type: 10s20f
- Pulley Belt Type: Serpentine
- Pulley Groove Quantity: 4
- Terminal Type: Pin
- Mount Distance MM: 16.510
- Distance From Clutch To Mounting Flange: 0.65625
- Coil Clock Position: Wire Lead
- Mounting Type: Tangent Mount
- Pulley Ridge Diameter: 4.250
- Clutch Maximum Diameter: 4.250
- Pulley Lip Diameter: 4.250
This Part Fits the Following OEM/Substitute Numbers:
031867, 032057, 034279N, 034279ND, 034810N, 034810ND, 035126N, 035126ND, 035127N, 035127ND, 0610081, 10000631, 10364873, 10366545, 11178377, 1420940, 1421127AFT, 1421127NEW...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Chevrolet Silverado 2500 | V | - | 8 Cyl 4.8L | 294 |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.38 In
- Shell Diameter: 2.32 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
10099, 10099ST, 10108694, 10182355, 11099, 12551298, 12551958, 12554955, 12555685, 12573337, 12573338, 12573340, 12573341, 12573342, 12577268, 12583570, 12589430, 12591355...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Chevrolet Silverado 2500 | V | - | 8 Cyl 4.8L | 294 |
- Flexy Flare Rubber Fender Exten. X-Wide No Lip Side Mount, 4-1/4"x25' Bulk Roll
- Flexy Flare Rubber Fender Exten. X-Wide No Lip Side Mount, 4-1/4"x25' Bulk Roll
- 4 1/4" No-Lip Side Mount Extra-Wide 25' Bulk Roll
- Product Attributes:
- Width EA: 4.25
- Length EA: 25
- Height EA: 2 1/2
-
Features:
- Flexable UV Resistant PVC Rubber
- includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Chevrolet Silverado 2500 |
- Auxiliary-Aluminum; Silver; Volume 40 Gallons; L 60in. x W 9 in. x H 19 in.; Long Rectangle
- Specialty Series Auxiliary Transfer Tank; Auxiliary-Aluminum; Silver; Volume 40 Gallons; L 60in. x W 9 in. x H 19 in.; Long Rectangle;
- Specialty Series Auxiliary Transfer Tank
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
- Gallon Capacity: 40
-
Features:
- Constructed Of Heavy Duty Brite-Tread Aluminum
- Radius Curve Eliminates Weld Pressure Points
- 4 Stability Baffles And Drain Plug
- Made In USA
- Limited Lifetime Warranty
- Dee Zee Auxiliary Tanks - A safe and convenient means for transporting non-flammable liquids. Auxiliary tank can be connected to gravity flow kit to syphon fuel directly into your vehicles diesel gas tank (sold separately). Constructed of heavy gauge Brite-Tread aluminum. Radius curve design eliminates key weld pressure points. Tanks feature stability baffles, lockable cap, 3/8 in. drainage plug, and venting coupler. Tanks are intended for private use (non-commercial). Hydrostatically pressure tested to meet Federal Motor Carrier Safety Administration requirements for auxiliary tanks. Meets Federal DOT requirements for UN31B tanks. Connector kits to feed diesel directly into your fuel line sold separately (DZ97960 & DZ97961).
Additional Fitment Information:
| Vehicle | Bed Length | Sub Model |
|---|---|---|
| 2013 - Chevrolet Silverado 2500 | 69.3 | LS |
- Outback F4 15" Mini LED Light Bar, Red
- Outback F4 15" Mini LED Light Bar, Red
- 14" Red Mini LED Bar
-
Features:
- Ultra Bright Light
- These compact yet powerful 11 red L.E.D. four function Outback F4 Mini Light Bars fit neatly between the tailgate and bumper of most popular full size pickup trucks. With running light, brake light and right and left turn signals they are functional and attractive additions to any full size pickup.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Chevrolet Silverado 2500 |
- Outback F4 15" Mini LED Light Bar, Smoke
- Outback F4 15" Mini LED Light Bar, Smoke
- 14" Smoke Mini LED Bar
-
Features:
- Ultra Bright Light
- These compact yet powerful 11 smoke L.E.D. four function Outback F4 Mini Light Bars fit neatly between the tailgate and bumper of most popular full size pickup trucks. With running light, brake light and right and left turn signals they are functional and attractive additions to any full size pickup.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Chevrolet Silverado 2500 |
- 3RD Brake Light Logic Module
- 3RD Brake Light Logic Module
- 3rd Brake Light Logic Module
-
Features:
- Compact Easy To Install
- Required when using a single L.E.D. as a third brake light, Pacers Logic Module filters out unwanted turn signal inputs common on domestic vehicles that typically use single filament bulbs.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Chevrolet Silverado 2500 |
- Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
- Flexy Flare Rubber Fender Exten. Heavy Duty Reinforced, 2-1/2" x 58" 4 Piece Kit
- 2 1/2" Heavy Duty Steel Reinforced 4 Piece Kit
- Product Attributes:
- Width EA: 3.5
- Length EA: 58
- Height EA: 1 3/8
-
Features:
- Flexable UV Resistant PVC Rubber
- each piece measures 58" in length. Includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Chevrolet Silverado 2500 |
Showing 1 - 10 of 171 products
Loading...