2018 Audi A3 Parts
Choose your Submodel for your 2018 Audi A3
Image
Product
Price
- 26" TRICO Tech Beam Blade
- 9mm Hook, 9x4 Hook, Side Pin (22mm), Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- TRICO Tech
- All-weather durability
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Audi A3 | Left |
- 19" TRICO Tech Beam Blade
- 9mm Hook, 9x4 Hook, 3/16" Side Lock, 7mm Bayonet, Side Pin (22mm), Side Pin (17mm), Pinch Tab, Push Button (22mm), Push Button (19mm)
- TRICO Tech
- All-weather durability
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Audi A3 | Right |
- 26" TRICO NeoForm Beam Blade
- Pinch Tab, Push Button (19mm)
- TRICO NeoForm
- Exclusive dual-point coupler helps eliminate streaking
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Audi A3 | Left |
- Autolite APP5325 Double Platinum Spark Plug
- .031"/0.8mm
- Double Platinum Spark Plug
- Product Attributes:
- Center Electrode Design: Standard / Regular
- Seat Type: Flat
- Electrical Terminal Type: Stud
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Platinum
- Resistor Type: Yes
- Insulator Material: Ceramic
- Hex Size: 5/8"
- Reach:
- 1.000
- 26.5
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Tapered
- Insulator Type: Mid Projection
- Pre-Gap Size:
- 0.044
- 1.10
- Resistance: 4000
- Ground Electrode Core Material: Nickel
- Autolite® Double Platinum Spark Plugs are a premium plug providing superior performance and platinum-to-platinum firing for a longer lasting spark plug. Autolite® Double Platinum Spark Plugs are engineered to provide easier starts, quicker acceleration and improved fuel efficiency. Autolite® spark plugs are the best alternative to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1116, 3381, 446
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Audi A3 | L | 1984 | 4 Cyl 2.0L | 121 |
- Stabilizer Bar Link
- Includes Greasable Socket Design to Reduce Corrosion and Wear
- MOOG K80478 Stabilizer Bar Link
- Product Attributes:
- Bolt Length:
- 13.190
- 335.0
- Greaseable: Yes
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Doors | Body |
|---|---|---|---|
| 2018 - Audi A3 | Front | 2 | Convertible |
- Stabilizer Bar Link
- MOOG K80478 Stabilizer Bar Link
- Product Attributes:
- Bolt Length:
- 13.190
- 335.0
- Greaseable: Yes
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-5628, 18444, 1880478, 1K0411315B, 1K0411315D, 1K0411315J, 1K0411315K, 1K0411315P, 1K0411315R, 265-1603, 265-1763, 3QF411315, 45G20554, 46G0394A, 536-317, 545-1394B, 545-1554, 5451394...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Doors | Body |
|---|---|---|---|
| 2018 - Audi A3 | Front | 2 | Convertible |
- 4 Way Flat Output; Converts 2-Wire/3-Wire/PWM ST System To 2-Wire Trailer Light Wiring; Req. Powered Converter Wiring Kit PN[55152] or Similar
- CURT 56236 Multi-Function Splice-in Tail Light Converter; 4-Pin Wiring Harness
- Multi-Function Taillight Converter
- Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
-
Features:
- Converts 2-Wire 3-Wire Or Pwm St System To 2-Wire Trailer Light
- Enclosure Significantly Increases Water And Vibration Resistance
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance And Durability
- Microcontroller Senses Current To Rapidly React To Overload
- Provides Improved Overload Short-Circuit And Thermal Protection
- Low-Voltage Operation Allows Function Down To Seven Volts
- Color-Coded Wires w/Wiring Guide For Easier Installation
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
- Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microcontroller that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package also includes four snap locks for faster, more secure splicing. A powered converter wiring kit #55152 is also required for installation.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Audi A3 |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Audi A3; Quattro
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 20 Minutes
- CURT 11399 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Audi A3; Quattro
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 20 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Audi A3 and A3 Quattro (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Body | CID |
|---|---|---|---|---|---|---|
| 2018 - Audi A3 | L | 1984 | Rear | 4 Cyl 2.0L | Sedan | 121 |
- ANCO Beam Winter Extreme Wiper Blade 18
- ANCO Winter Extreme Wiper Blade (Pack of 1)
- Winter Extreme
- Product Attributes:
- Adapters Required: No
- Adapters Included: Yes
- Frame Color: Black
- Wiper Blade Connection Type: Bayonet: 22mm, 19mm; Pinch Tab; Pinch Tab Button; Side-pin: 22mm, 19mm
- Blade Material: Duraklear Plus - Natural Rubber
- Frame Material: Steel; Plastic; Rubber
- Blade Type: Beam
- Refillable: No
- The ANCO Winter Extreme beam blade features exclusive Geo Core, Arctic Armor and DuraKlear Plus technologies to deliver an advanced high performance winter wiper blade.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Doors |
|---|---|---|
| 2018 - Audi A3 | Front Right | 2 |
- Black; 4 pc. Fits Sportback And Sedan~Not For Use w/Convertible
- KAGU Floor Mat; Black; 4 pc.; Front and Rear;
- KAGU Floor Mat
- Product Attributes:
- Non Slip Backing: Yes
-
Features:
- 3D Digitized Design Matches Each Vehicle Application
- Raised Edges Give Maximum Coverage
- Waterproof - Effectively Protects Vehicles Interior
- MAXpider® Btm Layer Keeps Mat in Place w/o Harming Orig. Carpet
- Shock and Sound Absorbent Inner Layer
- Easy Care Non-Slip Rubber Surface Layer
- Environmental Friendly Material/Non-Toxic and Odorless
- Carbon Fiber Embossed Pattern
- Unlike the traditional floor mats with heavy weights, commercial rubbery looking; 3D MAXpider custom-fit floor mats are the revolutionary interior protection for your vehicles with an innovative, unique three-layer structure. The digitized three dimensional design measured to exact cabin contours of your vehicle for trapping mess and spills yet, patented anti-skid backing keeps mats in place without harming the original carpet. Choices of stylish carbon fiber texture rubber surface or classic looped fabric surface.
Additional Fitment Information:
| Vehicle | Position | Body |
|---|---|---|
| 2018 - Audi A3 | Front and Rear | Sedan |
Showing 1 - 10 of 841 products
Loading...