Image
Product
Price
- 2000 lbs. Gross Trailer Weight; 200 lbs. Tongue Weight
- CURT 13522 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Buick Envision
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Rated To 2000 Lbs. Gross Trailer Weight And 200 Lbs. Tongue Weight
- Engineered With A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance With Sae J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid A-Coat Inside And Out
- Equipped With An Open-Back Receiver For Easy Cleaning
- Limited Lifetime Warranty [One-year Finish/One-year Parts]
- Made in USA [may include imported hardware]
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Buick Envision |
- Custom 4-Flat; Select Buick; Cadillac; Chevy; GMC; OEM Tow Package Required
- 4-Way Flat
- CURT 56325 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Buick Envision; Chevrolet Blazer; GMC Acadia; Cadillac XT5; XT6
- Custom Wiring Connector
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 2w
- WARNING CA Proposition 65: Yes
- Install Time: 10 Minutes
-
Features:
- Plugs Into Existing Vehicle Socket To Provide 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Chevy Blazer, GMC Acadia, Cadillac XT5 and Cadillac XT6, (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Buick Envision |
- 2000 lbs. Gross Trailer Weight; 200 lbs. Tongue Weight
- CURT 13522 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Buick Envision
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Rated To 2000 Lbs. Gross Trailer Weight And 200 Lbs. Tongue Weight
- Engineered With A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance With Sae J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid A-Coat Inside And Out
- Equipped With An Open-Back Receiver For Easy Cleaning
- Limited Lifetime Warranty [One-year Finish/One-year Parts]
- Made in USA [may include imported hardware]
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Buick Envision | Rear |
- 9012;Extreme Brightness;Turbo Fan Cooling
- W/ HALOGEN CAPSULE HEADLAMPS
- EXTREME BRIGHTNESSIf you?re looking for the brightest monster of all it is our Xtreme series LED headlight bulb. The Xtreme Series can produce 5x the light output of stock halogen bulbs and is brighter than a 35W HID system.
- Product Attributes:
- Power Consumption: 45 Watt
- Light Output: 10,000 Lumen Per Kit
- IP Rating: Ip65
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Amp Draw per Bulb: 3.0 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Powerful 10,000 lumens output produces stunning illumination that beats the 35W HID system
- Precision optics designed for long range visibility with zero glare
- Patented VacPipe cooling integrated heat sink allows for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in Advanced Temperature Regulation provides dependable operation at full intensity
- Temperature Regulation provides dependable operation at full intensity
- Bulb collar rotates 360degree for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Automotive grade LED chips paired with advanced cooling technology make the Xtreme Series the brightest LED headlight bulbs on the market. Produces a stunning output that's brighter than a 35W HID system and 5x brighter than a stock halogen bulb. Bulky fan cooling LED bulbs have become history. The Xtreme Series is designed to be compact enough to fit in the tightest spaces.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Buick Envision | High Beam and Low Beam |
- High Flow Premium Media; H-3.75 in.; OD-3 in.; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
L11424, WL10351
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Buick Envision | L | 1998 | LSY | 4 Cyl 2.0L | 122 |
- R-Line
- Product Attributes:
- Overall Height:
- 1.791
- 45.500
- Salability Restrictions: No
- Mounting Bolt Hole Diameter:
- 0.634
- 16.100
- Conventional Or Drum-In-Hat Type Rotor: Conventional
- Harmonize Code: 8708.30.5030
- Inside Diameter:
- 190.600
- 7.504
- Center Hole Diameter:
- 2.657
- 67.500
- Stud/Lug Hole Quantity: 5
- Solid Or Vented Type Rotor: Vented
- Nominal Thickness:
- 1.102
- 28.000
- Surface Type: Smooth
- Outside Diameter:
- 12.638
- 321.000
- Mounting Bolt Hole Quantity: 5
- Discard Thickness:
- 0.984
- 25.000
- UNSPSC Code: 25171715
- Mounting Bolt Hole Circle Diameter:
- 120.000
- 4.724
- Overall Height:
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- Sold Each. Purchase quantity 1 for 1 wheel
This Part Fits the Following OEM/Substitute Numbers:
120.62182, 121.62182, 125.62182, 13517848, 13529992, 13529994, 177-1252, 177-1268, 177-1269, 1771268
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Buick Envision | Front |
- Front Floor Liners
- Black; 2 piece
- X-ACT FRONT FLOOR LINER
- X-act Contour(TM) Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Our Exclusive StayPut Cleats Help Keep Your Liners Securely In Place
- With Both Softness And Strength Our Rubberized Duragrip Material Was Designed With Comfort In Mind
- Our Formfit Design Process Perfectly Forms Each Liner To The Detailed Contours Of Your Specific Ride
- Our Patented Formfit Edge Is A Raised Ridge That Runs Along The Door Jam Protecting From All Manner Of Mess
- No Hassle Lifetime Guarantee
- Made In The USA
- The Husky Liners(R) X-act Contour(R) perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Buick Envision | Front |
- BOLT Trailer Hitch Coupler Lock
- Product Attributes:
- Title: Bolt Collar - Kingpin Locking System
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Buick Envision |
- AmeriBrakes are a 100% North American made brake pad line manufactured in our own plant in Cambridge, Ontario. This allows us to have a continued advantage in the aftermarket for delivering first-to-market products with leading edge technology. AmeriBRAKES are progressive regarding materials and formulation development, we were "first-to-market" with a 100% copper free formula. Along with the engineering and high-quality raw materials that make an exceptional brake pad, it requires continuous hands-on control. Having total control in all areas of the manufacturing process assures 100% product quality all the way through distribution (which cannot always be guaranteed when sourcing across the ocean)
- AmeriPRO Ceramic
-
Features:
- AmeriBRAKES pads are enginereed and made in North America
- Exclusive carbon enhanced materials to ensure optimal all-condition performance
- 1:1 OE Design - Chamfered and slotted only when applicable to ensure safety and perfect fit
- OE Designed shims for virtually no vibration and noiseless braking
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
2314, 9549, 9612, D2314, N/A, PRC2314
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Buick Envision | L | 1998 | Front | 4 Cyl 2.0L | 122 |
- Cargo Liner
- Black; 1 pc.; Cargo/Trunk
- WB CARGO LINER
- WeatherBeater(TM) Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Our Formfit Design Process Perfectly Forms Each Liner To The Detailed Contours Of Your Specific Ride.
- Our Cargo Liners Are Ridiculously Easy To Install/Remove And Clean
- Our Cargo Liners Are Made From A Proprietary Material Blend That Is Sporty And Rugged
- No Hassle Lifetime Guarantee
- Made In The USA
- Put Nature firmly in its place. The rugged and sporty WeatherBeater Floor Liners perfectly conform to the contours of your ride and offer un-beatable carpet protection for whatever nature hurls at you.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Buick Envision |
Showing 1 - 10 of 26 products
Loading...