2004 Rough Country Parts

Choose a Make for your 2004 vehicle


Showing 1 - 10 of 896 products
Image
SKU
Product
Rating
Price

Rough Country
  • 2 in. Block And Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black
  • U-Bolt Kit; 2 in. Block And U-Bolt Kit; Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black;
  • U-Bolt Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
    • Tapered To Reduce Drive Shaft Angle
    • Single 9/16 in. Pin Blocks
    • 2.5 in. Wide
    • Powder Coated Black
    • U-Bolts Are E-Coated Black
    • Corrosion Resistant
  • Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat.  Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!

Additional Fitment Information:
Vehicle Sub Model Drive Type
2004 - Chevrolet Silverado 1500 LT 4WD

Rough Country
  • Includes [2] Black-Series LED Flush Mount Lights; Wiring Harness; Backup Sensor Relocators
  • Heavy Duty Rear LED Bumper; Includes [2] Black-Series LED Flush Mount Lights; Wiring Harness; Backup Sensor Relocators;
  • Heavy Duty Rear LED Bumper
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer; And Birth Defects Or Other Reproductive Harm. For More Information: Www.roughcountry.com/prop65 And Www.p65warnings.ca.gov
    • Bumper Style: Light Mount
  • Features:
    • Easy To Install!
    • Durable
    • Steel Construction
    • Includes [2] Rough Country Led Cubes
    • Integrated Steps For Easy Access To Bed
    • Retains Factory Receiver Hitch
    • Includes Backup Sensor Relocators
  • Give the rear of your F-250 / F-350 an aggressive, new appearance with Rough Countrys Rear LED Bumper. This easy-to-install upgrade gives your truck an improved look and better functionality, with two pre-installed Rough Country LED cubes that offer impressive off-road illumination! Rough Countrys Rear LED Bumper is made of a durable, all-steel construction thats ready to handle whatever you dish out. Each bumper features two Rough Country Black-Series 2in LED Flush Mount Cubes for rear illumination, and two integrated steps for easy access to the bed. Each bumper also includes sensor relocators to allow you to retain the vehicles anti-collision system. Unlike some aftermarket bumpers for this model, Rough Countrys LED Rear Bumper allows you to retain the factory receiver hitch for towing.Rough Countrys Rear LED Bumper is easy to install with common tools in a home garage! Best of all each bumper includes a 3-year warranty!

Additional Fitment Information:
Vehicle Position
2004 - Ford F-350 Super Duty Rear

Rough Country
  • Pair; Forged; Tie Rod Assemblies
  • Heavy Duty Tie Rod Kit; Pair; Forged; Tie Rod Assemblies;
  • Heavy Duty Tie Rod Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Heavy Duty Replacement Tie Rod Assemblies. Bend Resistant
    • Replaces The OE Inner And Outer Tie Rod Assembly
    • Sold In Pairs
    • Forged SAE1045 Steel Outer Tie Rod With Heat-Treated 4140 Ball Stud
    • 4140 Inner Adjustment Shaft With A SAE1045 Steel Ball-Joint Housing
    • 22mm Adjustment Threads
  • Dont settle for weak tie rods! You want your steering and suspension to be as strong as the truck you love. Thats why you need Rough Countrys HD Forged Tie Rod Kit. This upgrade is a great replacement for stock parts, especially if youre going off-road or towing a heavy load. Our tie rod ends give you a smoother ride, better turn-in response, and increased safety. Because sometimes stock just isn't strong enough and Reliable. You never know what kind of terrain you'll encounter or what obstacles may get in your way. Thats why you can rely on the rugged durability of our HD Tie Rod Kit to keep you going where you need to go. They are bend-resistant, have 22mm adjustment threads, and replace the inner, and outer tie rod ends. These heavy-duty tie rod end assemblies are made with forged steel and include an adjustable shaft and steel ball-joint housing. With these heavy-duty replacements, you can keep your vehicle on the road and out of the shop. Installation Rough Countrys Tie Rod Kit is a no-cutting, bolt-on installation. Warranty. Rough Countrys HD Forged Tie Rod Kit comes with our industry-leading warranty.

Additional Fitment Information:
Vehicle Drive Type
2004 - GMC Sierra 2500 HD 4WD

Rough Country
  • Lug Nut Set; M14x2.0; Set Of 32; Black
  • Wheel Installation Kit; Lug Nut Set; M14x2.0; Set Of 32; Black;
  • Wheel Installation Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Bulge Acorn Type Lug Nuts
    • Thread Size M14x2.0
    • Includes Socket Key For Easy Installation And Removal
    • Cold Forged Carbon Steel With Enhanced Rigidity
    • Long Lasting Finish
    • Exceeds OEM Standard In Material/Strength/Hardness
    • Corrosion Resistant
    • Easy To Install

Additional Fitment Information:
Vehicle
2004 - Ford Expedition

Rough Country
  • 2.5 in. Lift Includes The Following Parts~Necessary Installation Hardware~Strut Spacers
  • Leveling Lift Kit; 2.5 in. Lift;
  • Leveling Lift Kit
  • Product Attributes:
    • Lift/Drop Height: 2.5 In.
    • WARNING CA Proposition 65: No
  • Features:
    • 10-Stage Variable Valving
    • Increased Ground Clearance
    • Levels Front Of Vehicle w/The Rear
  • Leveling Lift Kit; 2.5 in. Lift;

Additional Fitment Information:
Vehicle Block CC Engine CID
2004 - Ford Expedition V - 8 Cyl 5.4L 330

Rough Country
  • Maintains Draglink Alignment; Maintains Turning Radius; Fits 6 in. Lifts
  • Pitman Arm; Maintains Draglink Alignment; Maintains Turning Radius; Fits 6 in. Lifts;
  • Pitman Arm
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Maintains Proper Draglink Alignment
    • Maintains Optimum Turning Radius
    • Helps Reduce Steering Vibrations
  • After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
2004 - Ford F-250 Super Duty Front King Ranch 4WD

Rough Country
  • 2.5 in. Lift Install Time 2-3 Hours~Includes The Following Parts~Necessary Installation Hardware~Strut Spacers
  • Leveling Lift Kit; 2.5 in. Lift;
  • Leveling Lift Kit
  • Product Attributes:
    • Lift/Drop Height: 2.5 In.
    • WARNING CA Proposition 65: No
  • Features:
    • 10-Stage Variable Valving
    • Increased Ground Clearance
    • Levels Front Of Vehicle w/The Rear
  • Leveling Lift Kit; 2.5 in. Lift;

Additional Fitment Information:
Vehicle Block CC Engine CID
2004 - Ford Expedition V - 8 Cyl 5.4L 330

Rough Country
  • 2.5 in. Block And Thread Size 9/16 inch; Inside Width 2.5 in.; Inside Length 10.5 in.; Square; E-Coated Black
  • U-Bolt Kit; 2.5 in. Block And U-Bolt Kit; Thread Size 9/16 inch; Inside Width 2.5 in.; Inside Length 10.5 in.; Square; E-Coated Black;
  • U-Bolt Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
    • Tapered To Reduce Drive Shaft Angle
    • Single 9/16 in. Pin Blocks
    • 2.5 in. Wide
    • Powder Coated Black
    • U-Bolts Are E-Coated Black
    • Corrosion Resistant
  • Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat.  Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!

Additional Fitment Information:
Vehicle Sub Model Drive Type
2004 - Chevrolet Silverado 1500 Base 4WD

Rough Country
  • Black; Vinyl
  • Soft Tri-Fold Tonneau Bed Cover; Black; Vinyl;
  • Soft Tri-Fold Tonneau Bed Cover
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer; And Birth Defects Or Other Reproductive Harm. For More Information: Www.roughcountry.com/prop65 And Www.p65warnings.ca.gov
    • Style: Soft Folding
    • Low Profile: No
    • Actual Color: Black
  • Features:
    • Quick And Easy Installation
    • Easy On Or Off In Less Than Three Minutes
    • Completely Assembled In The Box - No Loose Parts
    • No Tools Req. - Patented Quick Clamp System
    • Drive w/The Cover In The Open Or Closed Position
    • Tailgate Lock Can Provide Additional Security
    • Sleek Appearance Improves Fuel Economy
    • Safety Strap Included
    • Black Vinyl Bed Cover
    • Lightweight 6061 Aluminum Frame
    • All Weather Seal Keeps Out Rain And Snow
    • Tri-Fold Design
  • Rough Countrys Tri-Fold Vinyl Tonneau Cover gives you a practical way to protect your truck bed with a sleek look that installs in seconds.Keep your haul protected from weather and theft with our durable UV resistant, 3 ply double coated vinyl cover featuring a tailgate lock for additional security. The convenient triple-fold design allows you easy access to your bed or the ability to haul large items without entirely removing the cover. Just fold back one or two sections as needed, and attach the included durable storage straps and continue along your way.With a lightweight design and no tools required, installation is a snap. Your cover will arrive completely assembled and ready to install. Simply line up and fasten the quick-clamp locks and youre ready roll in seconds.Rough Countrys Vinyl Tri-Fold Tonneau Covers dont just look great; they help improve gas mileage by preventing wind resistance on the inside of the tailgate. Each Tri-Fold Vinyl Cover comes with a Limited Lifetime Warranty.

Additional Fitment Information:
Vehicle Bed Bed Length Sub Model
2004 - GMC Sierra 1500 Fleetside 78.0 SLE

Rough Country
  • Includes Mounting Brackets and Hardware Only Fits Models w/0-3 In. Lift Suspension~Superseded From PN[87326.20]
  • N3 Steering Stabilizer; Includes Mounting Brackets and Hardware;
  • N3 Steering Stabilizer
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Easy Bolt-on Installation.
    • Improves Control And Handling.
    • Reduces Bump Steer.
    • Reduces Tie Rod And Ball Joint Wear And Tear.
    • Chrome Hardened 9/16 in. Piston Rod
  • Steering stabilizers are designed to restrain in.bump steering in. and front end vibration, giving added life to tires, ball joints, and other steering components and are highly recommended for vehicles running aftermarket tires. The durable 18mm chrome hardened piston rod and large-bodied cylinder dwarfs factory equipment, ensuring a more effective vibration damping each and every time you take to the trails. Rough Countrys N3 Steering Stabilizer kit is easy to install, with a 100% bolt-on installation process that can be installed in a home garage with common tools.

Additional Fitment Information:
Vehicle Position Sub Model
2004 - Chevrolet Tahoe Front Z71
Showing 1 - 10 of 896 products

Loading...