Image
Product
Price
- 2 in. Block And Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black
- U-Bolt Kit; 2 in. Block And U-Bolt Kit; Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black;
- U-Bolt Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
- Tapered To Reduce Drive Shaft Angle
- Single 9/16 in. Pin Blocks
- 2.5 in. Wide
- Powder Coated Black
- U-Bolts Are E-Coated Black
- Corrosion Resistant
- Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat. Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2017 - GMC Sierra 1500 | RWD |
- 2.5 in. Lift Includes The Following Parts~Necessary Installation Hardware~Strut Extensions
- Front Leveling Kit; 2.5 in. Lift;
- Front Leveling Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- Maintains Factory Ride Quality
- Levels Front Of The Vehicle w/The Rear
- No Need To Disassemble Strut For Install
- Gain greater ride height and achieve killer good looks at an incredible price with Rough Countrys new 2.5in Leveling Kit for 05 and up Nissan Frontier/Xterra models. This kit is ultra-easy to install! A set of strut spacers attach to the top of the strut, with no strut disassembly required, making the process considerably smoother!
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Nissan Frontier | L | 2488 | Front | 4 Cyl 2.5L | 152 |
- Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings Install Time 3-4 Hours
- X-Flex Control Arm Set; Front Upper; Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings;
- X-Flex Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fully Greaseable.
- Upper Joints Pivot Up To 20 Degrees.
- Lower Joints Pivot Up To 35 Degrees.
- Allows For Greater Articulation Off-road.
- With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thrity-five degrees pivot range.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Front Upper | Unlimited Rubicon |
- Set of 4; Front And Rear; Includes Mounting Hardware Install Time 30 Minutes
- Solid Steel Grab Handle; Set of 4; Front And Rear; Includes Mounting Hardware;
- Solid Steel Grab Handle
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Includes Front And Rear Handles
- No Drilling Req.
- Uses Existing Mounting Holes
- Easier Access For Getting In And Out Of Your Jeep Jk
- Made w/High-quality
- 7/8 in. Thick Steel Construction And Durable Rubber Grips
- Includes Lifetime Replacement Warranty
- Gain easier access for getting in and out of your lifted Jeep JK with Rough Countrys Solid Steel Front and Rear Grab Handles. These heavy-duty grab handles are incredibly easy to install, and offer an easy way to climb into your cab and a convenient place to hang on when taking to the trails.Our newly redesigned handles are made with a thicker, high-quality, 7/8- in. thick steel construction and durable rubber grips with Rough Country logo, these Solid Steel Grab Handles are comfortable to hold and built to last. These easy-to-install grab handles bolt right into existing mounting points on your Jeep JK, with no drilling or complicated modifications required. Simply swap out your existing bolts with the extended bolt and thread system included with this kit for an easy upgrade that takes no-time flat! No cutting or drilling is required to mount these handles, and the result is a tight, rigid connection that wont budge as you lift yourself into the cab. Rough Countrys Solid Steel Grab Handles include a Lifetime Replacement Warranty!
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - Jeep Wrangler | Unlimited Sahara |
- 2.5 in. Lift; w/N3 Struts
- Suspension Lift Kit; 2.5 in. Lift; w/N3 Struts;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Vehicle
- Easy Lift Strut Extensions Do Not Preload Your Coil Spring
- Easy Install
- No Strut Disassembly Or Strut Compressor Req. For Installation
- Shackles Built From HD 3/8in Plate Steel w/DOM Tubed Sleeves
- Gain greater ride height and achieve killer good looks at an incredible price with Rough Countrys new 2.5in Lift Kit for 05 and up Nissan Frontier.This kit is ultra-easy to install! A set of strut spacers attach to the top of the strut, with no strut disassembly required, making the process considerably smoother! Also included are a set of 3/8in plate steel shackles, engineered to preserve factory ride quality and reduce driveline vibrations. These heavy duty shackles provide lift height easily and effectively, while their beefy design and powdercoat finish are durable enough to hold up to the elements.Most notably, this shackle kit includes a set of DOM tubed bolt sleeves and Grade 8 hardware, meaning unparalleled strength in an area where most competitors suffer. Now you can wheel with peace of mind knowing our strong sleeves and bolts wont break or split like cheaper alternatives.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2017 - Nissan Frontier | L | 2488 | 4 Cyl 2.5L | S | 152 |
- 3.5 in. Lift; w/N3 Struts And Rear N3 Shocks
- Bolt-On Lift Kit w/Shocks; 3.5 in. Lift; w/N3 Struts And Rear N3 Shocks;
- Bolt-On Lift Kit w/Shocks
- Product Attributes:
- Lift/Drop Height: 3.5 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Installation
- Increased Ground Clearance
- Maintains Factory Ride Quality
- Levels The Front With The Rear Of The Vehicle
- Includes Application Valved N3 Series Shock Absorbers
- Rough Countrys 3.5in Bolt-On Kit offers easy installation and aggressive good looks at an incredible value. Take your truck to new heights with this excellent option for 05-20 Toyota Tacoma.This kit features a set of high-quality, tubular Upper Control Arms designed to make alignment adjustments easier and Clevite rubber bushings for enhanced durability. These arms are designed to promote a factory-like geometry by keeping the ball joint at optimum angles after lifting. This design allows for an improved, greater range of motion from the ball-joint, with less stress, wear and tear.Rough Countrys 3.5- in. Bolt-On Kit features N3 Nitrogen-charged shocks, giving your truck incredible ride-quality both on and off-road. Also included are a set of loaded N3 struts and fabricated rear blocks to provide lift height from front to rear. Once installed, this kit gives your truck plenty of ride height for larger tires while offering a clean, level look from front to rear.This all-inclusive kit comes with everything you need, and installation is a piece of cake compared to other kits on the market! Featuring a 100% bolt-on installation process that requires zero cutting or drilling, this kit can be installed using common tools in a home garage, and allows the truck to be returned to stock at any time if so desired. Best of all this kit features Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Toyota Tacoma | V | 3456 | 6 Cyl 3.5L | - |
- 3 in.; Nitrogen Charged N3 Shock Absorbers; 2 in. Rear Blocks; Front Upper Strut Extensions; U-Bolts
- Suspension Lift Kit; 3 in.; Nitrogen Charged N3 Shock Absorbers; 2 in. Rear Blocks; Front Upper Strut Extensions; U-Bolts;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 3 In.
- WARNING CA Proposition 65: No
-
Features:
- Easy Installation
- Increased Ground Clearance
- Levels The Front With The Rear Of The Vehicle
- Lifted Front Struts Help Maintain Smooth Factory-Like Ride
- Front Struts Are Structurally engineered For Lifted Applications
- Levels The Front By 3 in. Eliminating The Need For Strut Spacers
- Front Struts Feature A 3-year Limited Warranty
- The power of N3 also arrives for Toyota Tacoma at an incredible value. Take your truck to new heights with this excellent option for 05-21 Toyota Tacoma.Rough Countrys 3- in. Bolt-On Kit features N3 Nitrogen-charged shocks, giving your truck incredible ride-quality both on and off-road. Also included are a set of durable strut spacers and 2 in. fabricated rear blocks to provide lift height from front to rear. Once installed, this kit gives your truck plenty of ride height for larger tires while offering a clean, level look from front to rear.This all-inclusive kit comes with everything you need, and installation is a piece of cake compared to other kits on the market! Featuring an easy installation process that requires minor cutting and drilling, this kit can be installed using common tools in a home garage, and allows the truck to be returned to stock at any time if so desired. Best of all this kit features Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2017 - Toyota Tacoma | L | 2694 | 4 Cyl 2.7L | RWD | - |
- Includes LED Bracket; Main Wiring Harness; Y-Adapter; [3] Smoke Amber LEDs
- Mesh Grille LED Marker Light Kit; Includes LED Bracket; Main Wiring Harness; Y-Adapter; [3] Smoke Amber LEDs;
- Mesh Grille LED Marker Light Kit
-
Features:
- Easy Installation
- Plug And Play Support [halogen Headlight Models Only]
- Smoked Lenses For Unique Look
- Leds Remain Lit When In Park Or Drive
- Give your factory grille a one-of-a-kind look with Rough Countrys plug-and-play Raptor Style LED Grille Kit. This easy-to-install kit upgrades the look of your factory grille with a set of three amber LED markers providing an eye-catching, more menacing look.Unlike other products on the market, this LED marker kit features smoked lenses for a blacked-out look that fits in beautifully against the black factory grille. The durable, powdercoated mount is designed to resist the elements for a long lifespan of good looks and is engineered for a perfect fit, allowing the amber LEDs to sit just between the top slats of your factory grille.Rough Countrys Raptor Style LED Grille Kit features everything you need and installs in a flash with no cutting or drilling required! Simply mount the unit and connect the easy plug-and-play wiring harness for an instant upgrade. Put the finishing touch on your factory grille with this incredibly easy upgrade!
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - Ford F-150 | Platinum |
- Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings Install Time 3-4 Hours
- X-Flex Control Arm Set; Rear Upper; Includes 2 Tubular Adjustable Control Arms w/X-Flex Joints; Polyurethane Bushings; Sleeves; Grease Fittings;
- X-Flex Control Arm Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fully Greaseable.
- Upper Joints Pivot Up To 20 Degrees.
- Lower Joints Pivot Up To 35 Degrees.
- Allows For Greater Articulation Off-road.
- With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thirty-five degrees pivot range.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Jeep Wrangler | Rear Upper | Sahara |
- License Plate Adapter;
- License Plate Adapter
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- Relocate your license plate for better visibility with Rough Countrys JK License Plate Relocation Kit! The factory JK rear bumper is designed to hold your license plate on the drivers side of the vehicle. However, for anyone upgrading to an aftermarket bumper - or for those who prefer a more symmetrical look - this license plate relocation bracket kit gives you a new place to mount your plate directly on the spare!Each kit features an adjustable arm allowing you to dial in the perfect position closer or further from the spare. An included LED light mounts above the plate for proper visibility and illumination. The entire system mounts securely to your spare with two specially designed lug nut bolts. Each piece is laser cut for a precise fit and powder coated black for a long lifespan of good looks!
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - Jeep Wrangler | Unlimited Sahara |
Showing 1 - 10 of 1951 products
Loading...