Image
Product
Price
- 3" Coil Spring Lift Kit
- Stock Control Arms? Alignment cam locks will add 2 degrees of caster when used on stock length control arms, which will better align your wheels. Wheels / Tires: Factory wheels cannot be reinstalled with lift kit due to rear sway bar interference. Follow recommended wheel/tire specifications for proper clearance.
- Lift your Jeep and raise your performance expectations with this 3" Lift Kit. Increase your droop, wheel travel and get enough lift to fit 35" tires. Heavy-duty coil springs handle all the abuse you can throw at them. Fits 2012-2018 4WD 4 door Jeep Wrangler JKs.
- In the box: All Necessary Mounting / Installation Hardware Brake Line Extensions Bump Stop Extensions Coil Springs Sway Bar Links
- Product Attributes:
- Front Lift Method: Coil Springs
- Cutting Required: No
- Wheel Size: 16 X 8
- Max Tire Size 3: 35 X 12.5
- Back Spacing: 4.5"
- Front Lift Height: 3"
- Max Tire Size 2: 35 X 12.5
- Lift Type: Lift Kit
- Rear Lift Method: Coil Springs
- Welding Required: No
- Is Adjustable: No
- Wheel Size 2: 17 X 9
- Wheel Size 3: 18 X 9
- Accommodates Factory Wheels: No
- Rear Lift Height: 3"
- Back Spacing 2: 4.5"
- Back Spacing 3: 4.5"
-
Features:
- Brake line relocation brackets increase wheel travel and allow use of factory brake lines.
- Bump stop extensions properly limit up-travel, protecting your vehicle.
- Full length replacement coil springs add additional ride height while maintaining ride quality.
- Heavy-duty, extended-length sway bar links improve operating angle for reduced body roll.
- Rear track bar bracket correctly positions rear axle under vehicle.
- Zone Offroad produces heavy-duty lift kits for Chevrolet, GMC, Ford, RAM, Dodge Toyota, and Jeep trucks. A variety of lift heights are available to suit your truck's tire and ground clearance from 2", 3", 4" & 6". Lift kit features may include heavy-duty crossmembers, steering knuckles, strut spacers, and rear block kits to level out the stance. Custom-valved shock absorbers are available to improve performance and ride-quality on and off-road. All suspension systems are made in the USA and powdercoated for a long-lasting appearance. Shop Zone affordable and quality suspension lift kit systems!
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - Jeep Wrangler JK | 4DR |
- Adventure Series Upper Control Arm Kit
- Designed for vehicles with OE stamped steel or aluminum control arms, will NOT fit vehicles with OE cast steel arms. Kit includes (2) control arms, driver and passenger side. Tires wider than 285/70r17 cannot be installed on factory wheels due to clearance issues to the steering knuckles.
- Upgrade your truck's factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are designed for 14-18 Chevrolet/GMC 1500 trucks and SUVs with factory stamped steel or aluminum control arms. These arms are built from high strength steel, boxed, gusseted and fully welded for strength and rigidity. At the frame mount they use OE style rubber bushings for a long service free life and quiet operation. At the other end these arms feature an indexed ball joint cup designed for use with leveling and lifted applications. High strength ball joints are used with a protective ball joint cap to keep debris out. These upper control arms come fully assembled and ready to bolt in right out of the box.
- In the box: Control Arms
- Product Attributes:
- For Use With Lift Heights: 0-3"
- Vertical Position: Upper
- Horizontal Position: Front
- Welding Required: No
- Is Adjustable: No
- Cutting Required: No
-
Features:
- Designed for trucks with factory stamped steel or aluminum control arms*
- Improved strength with fully welded plate steel construction
- CNC machined ball joint cup with improved positioning ideal for use with leveling/lift kits
- High quality greaseable ball joints with a protective cap to keep out dirt/debris
- OE style rubber bushings for durability and maintenance-free operation
- Fully assembled and ready to install
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - GMC Yukon | XL |
- 2" Strut Spacer Leveling Kit
- Fitment: Will not fit Raptor models.
- You've got the truck you want, now get the level look you want. This easy-to-install 2" strut spacer maintains your factory ride and doesn?t require a strut compressor or disassembly of the strut. Fits 2009 - 2020 Ford F-150 - 4WD models.
- In the box: All Necessary Mounting / Installation Hardware Strut Spacers
- Product Attributes:
- Lift Type: Leveling Kit
- Rear Lift Method: None
- Welding Required: No
- Is Adjustable: No
- Front Lift Method: Strut Spacers
- Cutting Required: No
- Accommodates Factory Wheels: Yes
- Wheel Size: Stock
- Back Spacing: Stock
- Front Lift Height: 2"
-
Features:
- bolt-on design for easy installation
- no strut compressor required.
- 100% bolt-on design for easy installation.
- Detailed step-by-step instructions and Zone Offroad decals.
- Grade 8, heavy-duty hardware included.
- Maintains factory ride quality and handling characteristics.
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford F-150 |
- Adventure Series Upper Control Arms
- These upper arms are designed to work with Fox Coilovers, Zone 2" Strut Spacer, or 6" Zone IFS Lift. They may not work with all spacer kits available. Check for upper ball joint to coil clearance before installation of the arms. If the factory arm in the balljoint area hits the factory coil, or has less than 1/8" of clearance, the arms will not fix the problem. A different aftermarket strut spacer or replacement Fox coilover are recommended.
- Upgrade your truck's factory upper control arms with these high strength Adventure Series control arms from Zone Offroad. These arms are a direct replacement to improve strength and increase suspension droop travel. These arms are built from high strength steel, boxed, gusseted and fully welded for strength and rigidity. At the frame mount they use OE style rubber bushings for a long service free life and quiet operation. At the other end these arms feature an indexed ball joint cup designed for use with leveling and lifted applications. High strength ball joints are used with a protective ball joint cap to keep debris out. These upper control arms come fully assembled and ready to bolt in right out of the box.
- In the box: Upper Control Arms
- Product Attributes:
- Welding Required: No
- Is Adjustable: No
- Cutting Required: No
-
Features:
- Improved strength with fully welded plate steel construction
- CNC machined ball joint cup with improved positioning ideal for use with leveling/lift kits
- High quality greaseable ball joints with a protective cap to keep out dirt/debris
- OE style rubber bushings for durability and maintenance-free operation
- Fully assembled and ready to install
- Improve suspension travel and provide added strength over the factory units with Zone control arms & components for lifted Trucks & Jeeps. Shop our upper control arms (UCA) and 4-Link control arms designed specifically to be paired with a Zone suspension lift kit. All Zone control arms feature replaceable high-quality greaseable ball joints and urethane bushings. All control arms are an easy bolt on installation that will prepare you for the next adventure!
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford F-150 |
- 3/4" Coil Spring Spacers
- See Pre-Installation Check in the Instructions to verify fitment
- ***See Pre-Installation Check in the Instructions to verify fitment*** Is your Jeep in need of a little front-end boost to compensate for heavy winch bumpers and/or clear a larger tire? These 3/4" coil spring spacers are specially designed for use on the front of the Jeep Wrangler JK, Wrangler JL and Gladiator JT models. Perfect for getting that extra height without effecting ride quality or handling. Designed for stock height vehicles and most lift kits that use replacement coil springs.
- In the box: Coil Spring Spacers
- Product Attributes:
- Diameter: N/a
- Horizontal Position: Front
- Is Adjustable: No
- Height: 3/4"
-
Features:
- Lifts and levels the front to back stance.
- Maintains ride quality and handling characteristics.
- Polyurethane construction for long lasting, quiet operation.
- Provides extra boost to level out or compensate for heavy winch bumpers and accessories.
- Quick and easy installation.
- Shop Zone Leveling Kits for Truck and Jeep! Get a level appearance plus additional clearance with a Zone Offroad Leveling Kit for Chevy / GMC, Ford, RAM, Dodge, Toyota, and Nissan trucks as well as Jeeps. Leveling Kits are available in 1" to 2.5" heights depending on the application. Zone Offroad's research and development team designs affordable, bolt-on solutions for each truck to ensure proper fitment including coil spring spacers, strut spacers, and torsion key kits -- all the way up to our control arm leveling kits for GM and RAM applications. All Zone Offroad Leveling Kits are made in the USA and powder-coated. 1 Inch to 2.5 Inch Front Lift Heights | Affordable Leveling Solution | Smooth, factory-like ride quality | Easy to Install - Bolt On | Designed to not damage the vehicle
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Jeep Wrangler JL |
Showing 1 - 5 of 5 products
Loading...