Image
Product
Price
- Fuel Pump Strainer
- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Attachment Type: Push On
- Strainer Material: Polyester
- Fitting Inside Diameter: 11.0
- Micron Rating: 31
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Additional Fitment Information:
| Vehicle | Engine Designation | Fuel Delivery Type | Sub Model |
|---|---|---|---|
| 1988 - Toyota Corolla | 4AF | CARB | LE |
- Fuel Pump Strainer
- Short Bed Short Wheelbase ; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Attachment Type: Push On
- Strainer Material: Polyester
- Fitting Inside Diameter: 11.0
- Micron Rating: 31
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
23217-03030, 23217-0F010, 23217-11020, 23217-20060, 23217-23010, 23217-46090, 23217-74021, 23217-76040, 2321711020, 2321746090, 68000, 68020, 68021, 68031, 68040, 68043, 952-0002, 952-0005...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Fuel Delivery Type | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1988 - Toyota Pickup | L | 2366 | 22REC | 4 Cyl 2.4L | FI | DLX | R | Naturally Aspirated | - |
- Fuel Pump Mounting Gasket
- FEL-PRO 6579 Fuel Pump Mounting Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0951644, 10114141, 1400185, 1402421, 15002, 15010, 150101, 15060, 1630244, 1638383, 1730609, 2317497, 2401526, 2734213, 2843770, 3106497, 3174685, 3577870...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- Fuel Pump Mounting Gasket
- FEL-PRO 6579 Fuel Pump Mounting Gasket
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- Fuel Cap
- Vented Black Cap
- Standard
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Toyota 4Runner | L | 2366 | 4 Cyl 2.4L | - |
- Electric Fuel Pump
- Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
- Product Attributes:
- Average Current Draw: 6
- Maximum Pressure: 125.0
- Fuel Type: Gas
- Pump Type: Electric
- Outlet Outside Diameter: 0.375
- Terminal Quantity: 2
- Wiring Harness Included: No
- Position(s): In-tank
- System Pressure: 44 Psi
- Terminal Type: Threaded
- Terminal Gender: Male
- Average Flow Rating: 26
- Strainer Included: No
- 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
This Part Fits the Following OEM/Substitute Numbers:
15101-61B03, 15110-61B00, 15110-61BT0, 152-0822, 152-0919, 1520922, 17040-SD4-000, 17040-SH5-A30, 17040-SK7-A70, 17040-SL0-A30, 17040-SL0-A31, 17040-SL0-L30, 17040-SL5-A30, 17040-SM4-A30, 17040-SP0-A30, 17040-SS0-A30, 17040-SS0-V30, 17708-SE0-935...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Toyota 4Runner | L | 2366 | In-Tank | 4 Cyl 2.4L | - |
- WIX Air Filter Panel
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Duty Type: Ld
- Length: 12.200
- Ends: Plastic
- Style: Air Filter Panel
- Media Material: Synthetic
- Class: W
- Cubic Feet Per Minute Rating: 210
- WIX Premium Panel Air Filters provide excellent engine protection for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM air filter change intervals. These filters contain 30% more media than OES filters and use a phenolic resin treated enhanced cellulose media which provides excellent durability against moisture ingestion. When applicable, the high-tear strength polyurethane seal survives extreme hot and cold temperature conditions. Air filter Laboratory Tests per ISO 5011 at least 99.5% efficiency (Based on Wix 42389)
This Part Fits the Following OEM/Substitute Numbers:
0421445, 0AC00292, 1 987 429 135, 1103156, 1432072, 1433034, 17801-02020, 17801-16030, 17801-64020, 17801-64070, 17801-74020, 17801-74020-83, 1780102020, 25098522, 26244, 279, 33-2030, 33-2163...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 1988 - Toyota Celica | L | 1998 | 3S-GTE | United States | 4 Cyl 2.0L | Turbocharged | 122 |
- Engine Air Intake Hose
- Throttle Body Hose
- Product Attributes:
- Clamps Included: No
- Molded Hose: Yes
- Inside Diameter: 2.25
- Shape: Molded Assembly
- Emissions Sensor Port Equipped: No
- Grade Type: Regular
- Package Contents: 1 Air Intake Hose
- Configuration: One Piece
- Length: 8.5
- Outside Diameter: 2.75
- End 1 Shape: Round
-
Features:
- Direct replacement - fits and functions like original equipment
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.
This Part Fits the Following OEM/Substitute Numbers:
2223135030, SK696014
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Toyota Pickup | L | 2366 | 4 Cyl 2.4L | - |
- Engine Air Intake Hose
- To Air Flow Sensor
- Product Attributes:
- Clamps Included: No
- Molded Hose: Yes
- Inside Diameter: 2.25
- Shape: Molded Assembly
- Emissions Sensor Port Equipped: No
- Grade Type: Regular
- Package Contents: 1 Air Intake Hose
- Configuration: One Piece
- Length: 8.5
- Outside Diameter: 2.75
- End 1 Shape: Round
-
Features:
- Direct replacement - fits and functions like original equipment
- Quality construction - manufactured from premium materials for a long service life
- Excellent value - original equipment quality at a lower price
- Quality tested - has undergone testing to ensure proper fit and performance
- This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 1988 - Toyota Pickup | L | 2366 | 4 Cyl 2.4L | Naturally Aspirated | - |
- Fuel Pump Lock Ring
- Sending Unit
- Product Attributes:
- Inside Diameter: 3.25
- Lock Ring Diameter (In): 1.75 In
- Mounting Hardware Included: No
- Package Contents: 1 Fuel Pump Lock Ring
- Outside Diameter: 3.75
-
Features:
- Direct replacement - this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
- Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.
This Part Fits the Following OEM/Substitute Numbers:
7717835030, LO14
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Toyota Pickup |
Showing 1 - 10 of 310 products
Loading...