Fuel Tank Filler Neck
Dorman Products is one of the most versatile, innovative and interesting manufacturers in the automotive aftermarket as their strength comes in providing the auto parts and equipment that you need, are hard to find, or otherwise previously known as "dealer only". Dorman specializes in the a lot of the basic parts and tools any mechanic or do-it-yourselfer needs, like screws and bolts of all styles and shapes, including specialty automotive parts. Dorman also focuses on providing original equipment replicated parts that strictly adhere to OEM specifications, but usually go to improve durability and/or performance by using better materials or enhancing design. For nearly 100 years Dorman has been filling the needs of the auto parts world.
Featuring Dorman hydraulic brake hoses, parking brake cables, door mirrors and door handles, brake master cylinders, window motors and window regulators, control arm and ball joint assemblies, drum brake wheel cylinders, wheel lugs, disc brake hardware kits, cooling fans, intake and exhaust manifolds, fuel tanks, and so much more!
General
Package Contents
1 Fuel Filler Neck
Fill Pipe Inside Diameter
2
Information on technical characteristics, the delivery set, the country of manufacture and the appearance
of the goods is for reference only and is based on the latest information available at the time of publication.
-
excellent part quick delivery
-
-
-
-
Same as auto parts store but 60% of cost. Original filler cap not perfect fit
-
Not sure why others complained about the fit, I installed on 2004 Malibu and the fit is identical to OEM. Replaced a rusted out tube that was causing the engine light to be on for EVAP leaks. Great Price, Fast shipping!Installation Note: You will need to lower the rear cross-member to properly remove the old tube and install this new one, If you don't you will end up bending the tube to make it fit which will cause it to not fit properly once final install is done. ( I was able to just loosen all 4 bolts, but not remove them and let the cross-member rest on the bolt heads.)
-
Quick shipment and fit on just fine
-
fit great, first time I have ordered this type of product from AutoPartsWAY, will do it again when we need one.
-
The new filler neck fit perfect. The plastic sinker screws attaching it to the car body had to be reused from the car which was a challenge but I made it work.
-
Works well Fit my 00 Grand am and serves the purpose.
-
Perhaps that is my fault though? I installed it as I've installed fuel necks in the past, and had zero issues. Until I had to attach it to the fuel line itself and into the tank. Then the "angle" in which I had to turn it made it quite difficult to line up to where it connects to the fuel cap. It does fit! But it isn't pretty. And it took quite a bit of finagling. But that's all right. Shipping was fast and the boxing was perfectly acceptable!
-
The gas filler neck on my truck rotted away. This replacement neck by Dorman seems better made than the factory original. It fit perfectly too. It took about 10 minutes to install. Works perfectly.
-
at a great price this part proved to be the ideal choice for my DIY-er hubby.this came quickly and was easily the best for the money
-
Everything fit, the only problem I had was with the Ground cable eye terminal. It was a bit tight which made screwing in the bolt to the frame difficult. I corrected this by filing the off some of the tabs of the terminal.
-
WORKS GREAT, FAST DELIVERY, GOOD PRICE I WOULD RECCOMEND THIS TO MY FRIENDS.THIS PART FIT MY 97 S10 XCAB PERFECTLY.
-
Would recomend buying it cheaper than parts stores and is the exact same part fits beautifully I put it on my car
-
Fit vehicle as advertised, not much more you can say about a fuel filler neck. 1998 Dodge Ram 1500 4x4.