2020 Lincoln Navigator Air Filter AEM Induction

  • Features:
    • Designed To Increase Horsepower And Throttle Response
    • Cleanable And Guaranteed For The Life Of Your Vehicle
    • Captures Up To 99 Percent Of Harmful Contaminants
    • Outstanding Performance Even In Dusty Racing Conditions
    • Does Not Require Oil
    • Will NOT Void Vehicle Warranty
    • Manufactured In The USA
    • Limited Lifetime Warranty
  • AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration.
This Part Fits the Following OEM/Substitute Numbers:
332385, 7C3Z9601A, AL349601CA, FA1883

Additional Fitment Information:
Vehicle
2020 Lincoln Navigator
Brand AEM Induction
Part # A1828-20385
Condition New
Warehouse B

AEM Induction

  • DryFlow Air Filter
  • Panel; H-2.188 in.; L-10.5 in.; W-9 7/8 in.
  • AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow; filtration; and performance. They use an oil-free filtration material that allows easy cleaning and excellent filtration.
  • Dryflow Air Filter
  • AEM Air Intakes are engineered to add horsepower and reduce restriction compared to OEM air intakes. All AEM Air Intakes come with a lifetime DRYFLOW Synthetic air filter with great filtration. AEM Air Intake Systems including our Cold Air Intake, Short Ram Air Intake, and Brute Force Air Intake Systems are guaranteed for the life of your car or truck. A cold air intake system relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver large power gains. We also monitor fuel trim correction factors and all OBDII sensors during product development to eliminate leaning the engine out and/or throwing a check engine light.

    General

    Oil Included
    No Filter Oil Required
    WARNING CA Proposition 65
    Yes
    Width
    N/a
    Item Weight
    1.900 Lbs. (0.9 Kg)
    Machine Washable
    Yes
    Product Box Height
    11.700 In. (297mm)
    Filter Material
    Non-woven Synthetic
    Inside Diameter
    Oem
    Product Box Width
    2.600 In. (66mm)
    Product Box Length
    10.400 In. (264mm)
    Outside Diameter
    Oem
    Item Height
    2.188 In. (56mm)
    Prop 65 (C, R or CR)
    Cr
    Package Content
    1 Air Filter
    Pre-Screened
    No
    Automotive Item Grade
    High Performance
    Outside Width
    9.875 In. (251mm)
    WARNING CA Proposition 65 Message
    Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    Flange Angle
    0 Degree
    Overall Length
    N/a
    Package Quantity
    1
    Shape
    Panel
    Package Material
    Paperboard
    Frame Design
    Flexible
    Prop 65 Warning Label
    Https://www.knfilters.com/images/l/prop65.jpg
    Cap Outside Diameter
    N/a
    Filter Style
    Dry
    Outside Length
    10.500 In. (267mm)
    Package Type
    Box

    Packaging

    package quantity
    1
    weight
    1.92 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
    1. Stephen Schultz
      12 Mar, 2015
      Just what I needed
    2. swaff
      28 Dec, 2014
      This filter has been a great replacement for the K&N oiled filter that I had on my Porsche 911 (996) as part of the upgraded K&N cold air intake system. The oil seemed to not play nicely with the mass air flow sensor even when I only lightly oiled the filter, but I've had zero problems after switching to this filter.
    3. Scott Custer
      15 Dec, 2014
      Super easy to install. This new design is much better than the older design. I Haven't seen the mpg increase like I expected but it's also winter time so perhaps in the spring it will be a little better.
    4. Mark
      31 Mar, 2014
      Easy to install, no tools required, perfect fit, and a great price for a performance filter. I specially like that you do not have to use oil, much easier and less messy solution. I noticed a little better get up and go right off the bat. Haven't had it long enough to eval any mileage increase but better airflow should bring a few extra miles on a long haul. I would buy it again if I ever had to.
    5. firecracker
      17 Jan, 2014
      Not amazing but should work well looks well put together hopefully it will hold up to 10pounds of boost and not come apart
    6. Ian Hazeltine
      13 Jan, 2014
      This is the filter I have been hoping would be built for a long time. I hate having to oil the filters so the dryflow is perfect. Dimensions were just right so it fit my project application perfectly. Great build quality as well
    7. JUNGKI LEE
      08 Dec, 2013
      perfect!!
    8. AJackson
      28 Oct, 2013
      I have an 07 cobalt SS, with quite a few mods that I autocross and lightly drag race in addition to daily driving. I was previously using a spector filter for the sake of price point, but after seeing how my last one was starting to come apart I knew it was time for a change.During cruise control lock at 75mph on flat ground, my maf rate (scanned by aeroforce) went from an average 1.5-2.2lb/m to 3.7-4.2lb/m a mind blowing increase, the supercharger whines a lot louder, and the filter seems to be of a very durable construction. It's holding up well after a few months, no signs of needing a change. Also purchased the dry flow wrap with it because of the location of my intake piping. (bottom of front fender)
    9. Paul
      20 Oct, 2013
      Bought this to replace the more expensive and 1 time use SPT filter for my Subaru WRX's SPT short ram intake. Fits good and seems to provide better air flow than the SPT filter. Seems to be a good replacement for the SPT.
    10. sung en yeh
      18 Sep, 2013
      I love how easy is it to replace and clean up no need to oil the filter just use compress air to blow the dirty out of it. Also get a bit more power and see a lil improve on MPG like 1~2mpg on the highway
    11. Mike
      17 Jul, 2013
      I purchased this filter rather than the replacement one for the Spectre 9900. The Spectre HPR9881 filter requires oiling and cleaning while this filter only requires cleaning which is much easier to do. This filter is a great replacement.
    12. JD
      05 Jul, 2013
      I installed it on my 2013 1500 Ram & installation was simple, it only takes about 5 minutes or less. I have noticed a 1.5-2 mpg over the EPA estimates. I am getting 15.5-16 mpg around town in a 400 HP/410 lbs of torque vehicle that has 8000+ lbs of towing ability., not too bad, imo. I haven't taken it out on the interstate as of yet but I will update asap. This filter will pay for itself, great investment.
    13. RC
      18 May, 2013
      When i replaced this air filter I noticed a big increase in my fuel economy. It increased 4 MPG. Thought is was an anomaly but after several fill ups it is consistently 4 MPG or more. This is using real math and not any in dash computer. A nice surprise.
    14. Matt
      29 Mar, 2013
      Clamped right on. Easy to clean, no mess, no hassle, no hours waiting for it to dry. Great product. Recommend it to anyone using oil air filters.
    15. humorwvp
      07 Aug, 2012
      Great filter plus it's a dry element filter. I used to use the k and n oiled filters but then noticed my intake throttle bodie kept getting all gunked up and dirty. Also found out that k and n makes these filters for aem, so you basically get one great filter with two brand names backing it up.
    16. Leah
      25 Jul, 2012
      Bought this for a 95 eclipse and not only did it work really well but it looked nice with the rest of the engine. Great price and really happy with this product.
    17. Dirtfarmer
      24 Jul, 2012
      Have uses AEM filters for 7 years never have had an issue..just keep them maintained and they work great.I would not hesitate to purchase one again.
    18. Mike
      11 Apr, 2012
      I ordered this to replace the oiled filter on my Nismo CAI (actually we all know the truth now: it's a re-branded AEM!) for my 2004 G35 Coupe. The AEM site does indeed have a list of all their filters, but it's a HUGE list with some subtle differences and their support wasn't very responsive when I asked to confirm the right part number for this specific application. If you want to be sure like I did: It's a perfect fit!I was excited to move to the dry-flow since it's easier to clean, comes standard on the newer G37 intakes, was co-developed with K&N (should still flow well), and the oiled filters can cause problems with our MAFs if excess oil gets pulled up through the intake. It's a little tricky to install yourself (the main reason I wanted to be extra sure it would fit before ordering), but there are a lot of G35 forum posts showing how to do it by removing your driver side fender liner...allocate an hour to remove one wheel (the extra space is worth it), pull a few...
    19. Nicholas Peters
      26 Feb, 2012
      The product is a better version of the one i had on already. Fits right on and seems to allow more airflow. With same great Dry flow technology.
    20. jjy491
      27 Jan, 2012
      I bought this about four months ago as a replacement filter for the one that came with a Neuspeed P-Flo aftermarket intake system for my 2007 VW GTI. This filter, unlike the one I had on it prior, is a DryFlow filter and has no oil that is known to cause problems with cars that run a MAF (Mass Airflow Sensor). The old filter had to be cleaned and re-oiled but if you used too much oil, you risk ruining your MAF sensor. I bought this for peace of mind when cleaning it, but also it seemed to tone down the excessive "harshness" of the intake harmonics that could be heard in the cabin when you went wide open throttle. Instead, all you're left with is the sweet sound of rushing air through your intake. :)All in all, I would highly recommend this product to anyone looking for an easy to service air filter that should last a very long time.
    21. Mark Smith
      20 Sep, 2011
      No oil required. Zero risk of clogging your sensors. Vibration keeps most of the dust off and filter mostly clean.
    22. roro2k "JSpec Fanatic"
      28 Apr, 2011
      Ordered this to replace the one that came with my AEM cold air intake. I cleaned the old one at 50,000+ miles, then decided to just get a new one at 80,000+ miles. Car runs & sounds a lot better now. If you're not sure what size/model number you need, just go to the AEM site and enter your application. Easy to install with just a flat-head screwdriver.
    23. Nicholas Georgas
      21 Feb, 2011
      Came as promised and quickly. Got it as a replacement filter. Have always liked the performance and quality of AEM filters in my truck.
    24. iDiotgear "iDiotgear"
      29 Jan, 2011
      Works as advertised but the picture shown isn't the actual product. It's red with the mesh wire on the outside. These are made by K&N filters. I don't recall if they're the first who made open air filters but they were the most popular. They look exactly like K&N but no oil is necessary.The benefit of not having the oil is you can't get your mass airflow sensor or throttle body contaminated.
    25. Atomsapple
      20 Jan, 2011
      I've had a Neuspeed P-Flo intake on my 2007 VW GTI for ~2 years. One of my biggest complaints with the included (oiled) K&N filter has been the harsh rake sound near the top of the torque curve in lower gears. Cleaning the filter has also been quite a tedious project... spray with cleaner, let soak in, knock off the bits and pieces, rinse, repeat, dry completely, and spray oil. Don't forget to cross your fingers that you didn't over-oil the filter and contaminate the MAF sensor!I came home to find the AEM DryFlow waiting for me. As soon as the engine bay fell to a reasonable temperature, I ripped out the now grey K&N oiled filter, and popped open the AEM box. What I found was not the dark grey dry filter in the picture, but a bright red dry filter, reminiscent of when I first received my Neuspeed P-Flo. Popped it onto the end of the pipe, with a very snug fit and we were ready.What a difference in sound. Gone is the harsh rake sound I grew to hate, and it even...
    26. Kevin W
      18 Dec, 2010
      The AEM Dryflow filters are my choice of reusable filters. Many filters that require oil can easily be over-oiled leading to MAF sensor failure. Also, cleaning and oiling the oil-based filters is a complete pain. With the Dryflow, you can rinse the filter clean and reinstall as soon as it's dry. If the filter is real dirty you can clean it a little more aggressively.Also, the Dryflow filters do not use a metal mesh for the structure. This is very important for the longevity of the filter because it is common to drop the filter or have other objects in the engine bay contact the filter from time to time. With the Dryflow filter the shape will remain unchanged. This is especially good for some of the applications we use this filter on where the filter touches the hood when installed.
    27. jst1man "jst1man"
      10 Aug, 2010
      Bought this product to replace a K&N filter in a Stillen CAI. It is an inch shorter than the K&N, but was easier to get into the enclosure than an oem replacement. Very happy with the purchase. This is the filter I will use now.
    28. HelloDarwin
      26 Jan, 2010
      I received the item (filter) and it was perfect. It was the wrong size however and that was completely my fault for not making sure. I returned the item and received a refund. It's kind of hard to know who is trustworthy over the internet and I highly recommend this dealer.
    29. Joel Gangross
      21 Dec, 2009
      I purchased this to replace the K&N filter on the intake---after reading the oil analysis reporting that there is usually high Si in the oil.....recommend a dry filter. I will be using this and dry filters in my vehicle.

    Write A Review

    You must be logged in to submit a review.

    Loading...