Image
Product
Price
- Remanufactured;w/o ElectronicFeedbackMotor;ReplacesTagNumbers8284/8304/8308/8309/8312/8335/8336/8337/8349/8351/8355/8363/8392
- Carburetor; Remanufactured;w/o ElectronicFeedbackMotor;ReplacesTagNumbers8284/8304/8308/8309/8312/8335/8336/8337/8349/8351/8355/8363/8392;
- Carburetor
- Product Attributes:
- Flange: Oem
- Primary Power Valve: N/a
- Usage: Oem
- WARNING CA Proposition 65: No
- Choke: Oem
- CFM: Oem
- Barrel: Oem
- Emission: Oem
-
Features:
- Carburetor
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Jeep CJ5 | V | - | 8 Cyl 5.0L | 304 |
- Replaces Carbs. w/Tag Numbers BBD 8338/8339/8340/8341/8357/8360/8362/8364/8367/8383/8384/8394
- Carburetor; Replaces Carbs. w/Tag Numbers BBD 8338/8339/8340/8341/8357/8360/8362/8364/8367/8383/8384/8394;
- Carburetor
- Product Attributes:
- Flange: Oem
- Primary Power Valve: N/a
- Usage: Oem
- WARNING CA Proposition 65: No
- Choke: Oem
- CFM: Oem
- Barrel: Oem
- Emission: Oem
-
Features:
- Carburetor
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1983 - Jeep CJ7 | L | - | 6 Cyl 4.2L | 258 |
- For Use F-Head Engine
- Carburetor; For Use F-Head Engine;
- Carburetor
- Product Attributes:
- Flange: Oem
- Primary Power Valve: N/a
- Usage: Oem
- WARNING CA Proposition 65: No
- Choke: Oem
- CFM: Oem
- Barrel: One
- Emission: Oem
-
Features:
- Carburetor
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1960 - Jeep CJ3 | L | 2197 | 4 Cyl 2.2L | 134 |
- For Use w/L-Head Engine
- Carburetor; For Use w/L-Head Engine;
- Carburetor
- Product Attributes:
- Flange: Oem
- Primary Power Valve: N/a
- Usage: Oem
- WARNING CA Proposition 65: No
- Choke: Oem
- CFM: Oem
- Barrel: One
- Emission: Oem
-
Features:
- Carburetor
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1951 - Jeep Willys | L | 2197 | 4 Cyl 2.2L | CJ-3 | 134 |
- Double Pumper Carburetor
- Double Pumper Carburetor; Shiny Finish; 4 bbl; 750 cfm; Model 4150; Mech. Secondary; Manual Choke; Gasoline; Dual Fuel Inlet;
- Product Attributes:
- Primary Main Jet: 70
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Down Leg
- Vacuum Port Quantity: 1 Timed (spark); 1 Full; 1 Pcv
- CFM: 750
- Secondary Type: Mechanical
- Supercharged Application: No
- Carburetor Type: 4150
- Fuel Inlet: Dual
- Flange: Square Bore
- Secondary Pump Nozzle Size: 31
- Usage: Street/strip
- Choke: Manual
- Secondary Main Jet: 80
- Barrel: Four
- Emission: Without Egr
-
Features:
- Shiny Finish For Good Looks
- Optimized Street/Strip Calibration That Works Out Of The Box
- Manual Choke For Precise Cold Start Control
- Mechanical Secondaries For Awesome Tire Turning Performance
- 4 Corner Idle Allows You To Precisely Control Your Idle System
- Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Lightweight Vehicles w/Auto Transmission w/High Stall/Low Gearing
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
- Holley Double Pumper carburetors are a perfect performance upgrade for hot street cars and race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles across the finish line, the Double Pumper is a great choice whether you are burning up the street or the quarter mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission or an automatic transmission with a high stall and low rear end gears. The Double Pumper is available in a gold dichromate or tumble polished shiny finish and features dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high volume fuel delivery and a manual choke for easy control of engine warm up. Dont trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Street Avenger Carburetor
- Street Avenger Carburetor; 4 bbl; 570 cfm; Model 4150; Vacuum Secondary; Manual Choke; Gas; Dual Fuel Inlet; 1.50 in. Throttle Bore; Shiny Finish;
- Product Attributes:
- Primary Main Jet: 54
- Primary Power Valve: 8.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.562 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- Vacuum Port Quantity: 1 Timed (spark); 2 Full; 1 Pcv
- CFM: 570
- Secondary Type: Vacuum
- Supercharged Application: No
- Carburetor Type: 4150
- Fuel Inlet: Dual
- Flange: Square Bore
- Usage: Street/hi-performance
- Choke: Manual
- Secondary Main Jet: 65
- Barrel: Four
- Emission: Without Egr
-
Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Manual Choke For Precise Cold Start Control
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
- Street Avenger carburetors are known to bolt on right out of the box and have great features such as a quick change vacuum secondary for easy fine tuning; optimized street calibrations; four vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy start ups; built-in fuel filters; and an included fuel line kit so there are no unnecessary trips back to the parts store. The Avenger series are the first carburetors to have a limited lifetime warranty. With a great warranty like that and the included comprehensive instruction manual, you can count on years of worry free service.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Double Pumper Carburetor
- Double Pumper Carburetor; Shiny Finish; 4 bbl; 650 cfm; Model 4150; Manual Choke; Mech. Secondary; Dual Fuel Inlet; Gasoline;
- Product Attributes:
- Primary Main Jet: 67
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- Vacuum Port Quantity: 1 Timed (spark); 1 Full; 1 Pcv
- CFM: 650
- Secondary Type: Mechanical
- Supercharged Application: No
- Carburetor Type: 4150
- Fuel Inlet: Dual
- Flange: Square Bore
- Secondary Pump Nozzle Size: 28
- Usage: Street/strip
- Choke: Manual
- Secondary Main Jet: 73
- Barrel: Four
- Emission: Without Egr
-
Features:
- Shiny Finish For Good Looks
- Optimized Street/Strip Calibration That Works Out Of The Box
- Manual Choke For Precise Cold Start Control
- Mechanical Secondaries For Awesome Tire Turning Performance
- Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Lightweight Vehicles w/Auto Transmission w/High Stall/Low Gearing
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Holley Double Pumper carburetors are a perfect performance upgrade for hot street cars and race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles across the finish line, the Double Pumper is a great choice whether you are burning up the street or the quarter mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission or an automatic transmission with a high stall and low rear end gears. The Double Pumper is available in a gold dichromate or tumble polished shiny finish and features dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high volume fuel delivery and a manual choke for easy control of engine warm up. Dont trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Double Pumper Carburetor
- Double Pumper Carburetor; Dichromate Finish; 4 bbl; 650 cfm; Model 4150; Manual Choke; Mech. Secondary; Dual Fuel Inlet; Gasoline;
- Product Attributes:
- Primary Main Jet: 67
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- Vacuum Port Quantity: 1 Timed (spark); 1 Full; 1 Pcv
- CFM: 650
- Secondary Type: Mechanical
- Supercharged Application: No
- Carburetor Type: 4150
- Fuel Inlet: Dual
- Flange: Square Bore
- Secondary Pump Nozzle Size: 28
- Usage: Street/strip
- Choke: Manual
- Secondary Main Jet: 73
- Barrel: Four
- Emission: Without Egr
-
Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Optimized Street/Strip Calibration That Works Out Of The Box
- Manual Choke For Precise Cold Start Control
- Mechanical Secondaries For Awesome Tire Turning Performance
- Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Lightweight Vehicles w/Auto Transmission w/High Stall/Low Gearing
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Holley Double Pumper carburetors are a perfect performance upgrade for hot street cars and race vehicles. Double Pumper carburetors are an American icon when it comes to performance carburetors. From their roots as the premier carburetor on many factory muscle cars to powering thousands of vehicles across the finish line, the Double Pumper is a great choice whether you are burning up the street or the quarter mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission or an automatic transmission with a high stall and low rear end gears. The Double Pumper is available in a gold dichromate or tumble polished shiny finish and features dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high volume fuel delivery and a manual choke for easy control of engine warm up. Dont trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Classic Street Carburetor
- Classic Street Carburetor; 4 bbl; 650 cfm; Model 4150; 2 Circuit Metering; Electric Choke; Vacuum Secondary; Dual Fuel Inlet; Gas; 1.688 in. Throttle Bore; Gold Dichromate Finish;
- Product Attributes:
- Primary Main Jet: 67
- Primary Power Valve: 6.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Throttle Bore: 1.688 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Booster Type: Straight
- CFM: 650
- Secondary Type: Vacuum
- Supercharged Application: No
- Carburetor Type: 4150
- Fuel Inlet: Dual
- Flange: Square Bore
- Usage: Street/hi-performance
- Choke: Electric
- Billet Color: None
- Secondary Main Jet: 73
- Barrel: Four
- Emission: Without Egr
- Circuit: 2
-
Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Universal Calibration For Easy Bolt-On Performance
- Factory Preset Elec Choke For Easy Startups
- For All Weights/Gearing/Transmission For Smooth Open Of Secondaries
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Power Valve Blow-Out Protection
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
- Classic Holley carbs have been a staple for rodders around the world for decades. They're the perfect performance upgrade for stock to mildly modified vehicles and have that classic Holley look. Holleys 0-80783C dual feed fuel inlets to assure you get all the fuel you need while its vacuum secondaries and electric choke make it amazingly universal. Plus, it is Gold Dichromate coated for durability and classic Holley looks. Dont trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Marine Carburetor
- Marine Carburetor; 4 bbl; 600 cfm; Zinc/Gold Dichromate; Electric Choke; For Use W/Ford 351 CID 5.8L; Model 4160;
- Product Attributes:
- Primary Power Valve: 2.5
- Usage: Marine
- WARNING CA Proposition 65: Yes
- Choke: Electric
- Throttle Bore: 1.563 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- CFM: 600
- Barrel: Four
-
Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Single Feed Fuel Inlet For Easy Installation
- J-Style Vent Tubes
- Meets Coast Guard Specifications
- Power Valve Blow-Out Protection
- 100% Wet Flow Tested By Holley Technicians
- All Holley Marine Carburetors are designed to meet Coast Guard specifications. A marine carburetors fuel metering system is calibrated to compensate for unique engine loads found on boats. The J-style vent tubes direct fuel/fumes back into the carburetor for safe operation while on rough waters. The Holley 0-80319-2 Marine carburetor is designed for Ford Marine 351 CID (5.8L) engines.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Showing 1 - 10 of 65 products
Loading...