Image
Product
Price
- Fits The Fuel Pressure Regulator
- Fuel Pressure Regulator O-Ring Kit; Fits The Fuel Pressure Regulator;
- Fuel Pressure Regulator O-Ring Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fuel Pressure Regulator O-Ring Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1991 - Jeep Comanche |
- Compact EFI Regulators - Silver / Black
- Regulator - EFI Bypass, Adjustable (2) -6 inlets, (1) -6 bypass.
- Product Attributes:
- Port Quantity: 3
- Pressure Range: 30-70
- Prop 65 - Short Label: P65_warning_chromium.jpg
- Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Chromium, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Prop 65 Flag: Yes
- Outlet Port Diameter: 0.375
- Prop 65 (C, R or CR): Cr
- This EFI Bypass Regulator encompasses features and benefits only found on Aeromotive regulators and in a new smaller and lighter package. Capable of supporting applications up to 1000 HP, the 13129 EFI Bypass Regulator can handle high-flow EFI fuel pumps and the most aggressive street machines; especially those looking for a cleaner, lighter solution where performance is critical or where space is a premium. Base pressure adjustable from 40-75 psi. Fuel pressure rises on a 1:1 ratio with boost. Provides (2) ORB-06 inlet/outlet ports and (1) ORB-06 return port. 1/8? NPT gauge port. Bright Dip Black Anodized Finish. Vacuum boost port. CNC-Machined 6061 T6 billet aluminum construction.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- A1000 Injected Bypass Regulator
- A1000 Injected Bypass EFI Regulator, Adjustable, (2) -10 inlets, -6 return.
- Product Attributes:
- Port Quantity: 3
- Pressure Range: 40-75
- Prop 65 - Short Label: P65_warning_chromium.jpg
- Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Chromium, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Prop 65 Flag: Yes
- Outlet Port Diameter: 0.375
- Prop 65 (C, R or CR): Cr
- Performance EFI regulator designed for medium to high horsepower applications. This regulator features Aeromotive?s high-flow design, superb pressure control, and legendary durability. On the street and at the track, this pressure regulator has logged more miles, laps and passes than any other performance EFI regulator in the world! Base pressure adjustable from 40-75 PSI. Gasoline, ethanol and alcohol compatible. Fuel pressure rises on a 1:1 ratio with boost. 1/8' NPT gauge port. P/N 13101 provides (2) ORB-10 inlet ports and (1) ORB-06 return port.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Fuel Pressure Regulator
- Fuel Pressure Regulator; Carbureted; Gas; 3/8 in. NPT Inlet/Outlet; 4.5-9.0 PSI Range; 3/8 in. NPT Return; Bypass Style; Two Port; Shiny Finish;
- Product Attributes:
- Pressure: 4.5-9 Psi
- WARNING CA Proposition 65: Yes
- Outlet Size: 0.375 In. Npt
- Return Size: 0.375 In. Npt
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.375 In. Npt
- Style: Bypass
- Fuel System Type: Gasoline
-
Features:
- Adjustable Fuel Regulation From 4-1/2 To 9 PSI
- Preset To 7 PSI
- 3/8in. Npt Ports 1 in. 1 Out 1 Bypass Or Return
- Used In Systems With A Return Line Back To The Fuel Tank
- Quieter Fuel Pump Operation
- Designed Only For Carburetor Use
- Chrome Finish
- Mounting Bracket Included
- Holley fuel pressure regulators are designed to precisely control the fuel pressure from the fuel pump to the carburetor. Too much fuel pressure for a given needle and seat assembly can overload the needle and seat and may cause flooding or drivability problems. Each Holley fuel pressure regulator is fully adjustable so regulating the fuel pressure to your engines needs is a simple task. All Holley regulators are pre-set at the factory so there is no guesswork when first installing the regulator. The Holley 12-803BP fuel pressure regulator features 3/8 in. NPT in/out ports and a 3/8 in. NPT return port.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Fuel Pressure Regulator
- Fuel Pressure Regulator; Carbureted; Gasoline; 3/8 in. NPT Inlet/Outlet; 4.5-9.0 PSI Range; Non-Return Style; Two Port; Shiny Finish;
- Product Attributes:
- Pressure: 4.5-9 Psi
- WARNING CA Proposition 65: Yes
- Outlet Size: 0.375 In. Npt
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.375 In. Npt
- Style: Non-return
- Fuel System Type: Gasoline
-
Features:
- Adjustable Fuel Regulation From 4-1/2 To 9 PSI
- .220 in. 7/32 in. Restriction
- 3/8in. Npt Ports 1 in. 2 Out
- Chrome Finish
- Mounting Bracket Included
- Holley fuel pressure regulators are designed to precisely control the fuel pressure from the fuel pump to the carburetor. Too much fuel pressure for a given needle and seat assembly can overload the needle and seat and may cause flooding or drivability problems. Each Holley fuel pressure regulator is fully adjustable so regulating the fuel pressure to your engines needs is a simple task. All Holley regulators are pre-set at the factory so there is no guesswork when first installing the regulator. The Holley 12-803 fuel pressure regulator features 3/8 in. NPT in/out ports.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Carbureted By-Pass Regulator
- Carbureted By-Pass Regulator; 6 PSI; Chrome;
- Product Attributes:
- Pressure: 4.5-9 Psi
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Outlet Size: 0.375 In. Npt
- Return Size: 0.375 In. Npt
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.375 In. Npt
- Fuel System Type: Carbureted
-
Features:
- Die Cast Aluminum Construction
- 3/8 NPT Inlet/Outlet/Return Ports
- 1/8 in. NPT Gauge Port
- Boost Reference 1:1
- Holley does it again with their new die cast aluminum by pass style fuel pressure regulators. The same Holley quality that you expect at a price point that every budget can handle.1/8 in. NPT barb fitting for boost reference port included.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- HP Billet Fuel Pressure Regulator
- HP Billet Fuel Pressure Regulator; 4.5-9 psi; 3/8 in. NPT Ports; Carbureted; Non-Return Style; Gasoline/Diesel/E85; Black Anodized;
- Product Attributes:
- Pressure: 4.5-9 Psi
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline / Diesel / E85
- Outlet Size: 0.375 In. Npt
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.375 In. Npt
- Style: Non-return
- Fuel System Type: Carbureted
-
Features:
- Adjustable From 4.5-9 PSI For Precise Fuel Pressure Adjustment
- Constructed Of Billet Aluminum For Good Looks
- Used In Systems Where A Return Line Is Not Needed
- Use With Electric Or Mechanical Pumps
- One 3/8 in. Npt Inlet and Two 3/8 in. Npt Outlets
- 1/8 in. NPT Gauge Port
- Mounting Bracket Included
- Holley Billet Fuel Pressure Regulators are part of a complete line of fuel system products from Holley. They are precision machined from 6061-T6 billet aluminum for strength and durability. They feature a black bright dip anodized body and a clear bright dip anodized top for corrosion resistance and good looks. The Holley 12-840 fuel pressure regulator features 3/8 in. NPT in/out ports.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Carbureted By-Pass Regulator
- Carbureted By-Pass Regulator; 6 PSI; Black E-Coat;
- Product Attributes:
- Pressure: 4.5-9 Psi
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Outlet Size: 0.375 In. Npt
- Return Size: 0.375 In. Npt
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.375 In. Npt
- Fuel System Type: Carbureted
-
Features:
- Die Cast Aluminum Construction
- 3/8 NPT Inlet/Outlet/Return Ports
- 1/8 in. NPT Gauge Port
- Boost Reference 1:1
- Holley does it again with their new die cast aluminum by pass style fuel pressure regulators. The same Holley quality that you expect at a price point that every budget can handle.1/8 in. NPT barb fitting for boost reference port included.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Fuel Pressure Regulator
- Fuel Pressure Regulator; Carbureted; Gasoline; 3/8 in. NPT Inlet/Outlet; 1-4 PSI Range; Non-Return Style; Two Port; Shiny Finish;
- Product Attributes:
- Pressure: 1-4 Psi
- WARNING CA Proposition 65: Yes
- Outlet Size: 0.375 In. Npt
- Return Size: N/a
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.375 In. Npt
- Style: Non-return
- Fuel System Type: Gasoline
-
Features:
- Adjustable Fuel Regulation From 1 To 4 PSI
- .220 in. 7/32 in. Restriction
- 3/8in. Npt Ports 1 in. 2 Out
- Chrome Finish
- Mounting Bracket Included
- Holley fuel pressure regulators are designed to precisely control the fuel pressure from the fuel pump to the carburetor. Too much fuel pressure for a given needle and seat assembly can overload the needle and seat and may cause flooding or drivability problems. Each Holley fuel pressure regulator is fully adjustable so regulating the fuel pressure to your engines needs is a simple task. All Holley regulators are pre-set at the factory at 2.8 PSI so there is no guesswork when first installing the regulator. The Holley 12-804 fuel pressure regulator features 3/8 in. NPT in/out ports.***The inlet pressure limitation is 7 psi.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Fuel Pressure Regulator
- Fuel Pressure Regulator; Cast Body w/Black Top; 30cc Diaphragm; Mounting Bracket And Hardware Included; 3/8 NPT Single Inlet And Dual Outlet; 4.5-9 psi.;
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Supports 4 Barrel Gas Engines Up To 600 HP
- Designed To Operate Within 4.5-9 PSI Range
- Preset At 7 PSI
- .250 in. Restriction
- Includes Mounting Bracket
- Pressure Regulator - Cast body with powder coated black top. Features 30cc diaphragm and mounting bracket with hardware. 3/8 in. NPT ports (single inlet, dual outlet).Supports 4-barrel gas engines up to 600 HPDesigned to operate within 4.5 - 9 PSI range; Preset at 7 PSI.250 in. (1/4 in.) restriction Includes mounting bracket Includes an 1/8 in. NPT port for manifold reference Boost Reference 1-1
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Showing 1 - 10 of 22 products
Loading...