1997 Chevrolet Camaro Serpentine Belt - Main Drive 8 Cyl 5.7L Dayco

This Part Fits the Following OEM/Substitute Numbers:
12550149, 25-060642, 3679412, 4060642, 642K6, 643K6, 6K0640, 6K642, 88986810, 88GB450P644, F19A-8620-EA, F29A-8620-SA, F39A-8620-ATA, K060642, PK060642

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1997 Chevrolet Camaro V - Main Drive 8 Cyl 5.7L 350
Brand Dayco
Part # D355060643
Condition New
Warehouse B

Dayco

Dayco is an industry and global leader in auto parts manufacturing industry and has been in the business since 1905, 100 years! Dayco makes replacement auto parts for the automotive aftermarket that keep vehicles moving, including belts, automatic belt tensioners, hoses, pulleys, timing products and more. Dayco goes to be the first to market on these parts by providing innovative, quality products.
Some of Dayco's most popular products are their custom fit, molded radiator hoses and heater hoses, their great array of premium belts, including the poly ribbed belts, v-ribbed belts, standard setting v-belts, and timing belts, as well as the ever popular timing belt kits that include all the parts needed to do a complete timing job on your vehicle's engine.

Dayco is an industry and global leader in auto parts manufacturing industry and has been in the business since 1905, 100 years! Dayco makes replacement auto parts for the automotive aftermarket that keep vehicles moving, including belts, automatic belt tensioners, hoses, pulleys, timing products and more. Dayco goes to be the first to market on these parts by providing innovative, quality products.
Some of Dayco's most popular products are their custom fit, molded radiator hoses and heater hoses, their great array of premium belts, including the poly ribbed belts, v-ribbed belts, standard setting v-belts, and timing belts, as well as the ever popular timing belt kits that include all the parts needed to do a complete timing job on your vehicle's engine.

General

Cross Section
K-section
Top Width
.82
Rib Profile
Straight Rib
Outside Circumference
  • 1648.72
  • 64.91
Rib Depth
Standard
Standards
Sae J1459, Sae J2432
Effective Length
  • 1631.95
  • 64.25
Minimum Operating Temperature
  • -42.7
  • -45
381
6
Maximum Operating Temperature
  • 100
  • 212

Packaging

package quantity
1
length
13.83 in
width
4.00 in
height
0.84 in
weight
0.44 lb
Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
  1. james kincaid
    05 May, 2015
    good quality. would buy again
  2. ShawnXB12
    28 Apr, 2015
    Perfect fit for my 2004 Nissan Sentra 1.8L SE.
  3. J. Groce
    22 Apr, 2015
    Bougfht this for a C2500 chevy truck 1995. Fit great and was cheaper than the local shops.
  4. Alfonso S.
    05 Apr, 2015
    Very good
  5. R. Villegas
    28 Mar, 2015
    This is a great automotive serpentine belt that fits perfectly in a 1998 Ford Explorer V6 (X) engine. This Dayco belt is made in the good olde USA whereas the Gates belt it replaced was made in Mexico. This is a ribbed belt and the past two belts have shown severe signs of wear and tear after two years of normal use. I will see how long this belt wears on but for now it looks and feels great. AutoPartsWAY provides great value and service coupled with FREE shipping arriving at my door safe and secure. Beats going to the auto parts store any day, have a great day!
  6. al brown
    27 Mar, 2015
    Fit perfect and was in excellent condition as advertised thanks and RTR
  7. whipper "whipper"
    22 Mar, 2015
    2012 Subaru Impreza replacement. 60,000 mile service, easy diy job. Good fit, good brand, good price.
  8. Robert
    21 Mar, 2015
    Good deal. Fast delivery thanks
  9. LancerL0t
    20 Mar, 2015
    Having to re-tightening the belts is not a reason to give it such a low rating son... you might wanna goto a mechanic next time.... I seen so many wanna-bee's .. with same issue here... I for one had no issue using these belts.. works perfect with my 2003 lancer
  10. Jesse E
    18 Mar, 2015
    Fit's 2003 Nissan Frontier w/supercharger
  11. Jay Munoz
    15 Mar, 2015
    works great
  12. Lars Slate
    12 Mar, 2015
    Looks Good
  13. Ronald J. Dyer "SuperTeach"
    05 Mar, 2015
    Both alternator and belt arrived in a timely manner. They were perfect fits for my car. I recommend this vendor.
  14. hector coronel
    04 Mar, 2015
    Fit perfectly
  15. A Guy
    01 Mar, 2015
    Perfect fit on my 2006 F250 6.0L Diesel with dual alternators. This belt is for the primary sheave that powers most of the engine accessories.
  16. Belizaire
    27 Feb, 2015
    Brilliant fit
  17. Fahad Choudhary "fahad242"
    26 Feb, 2015
    dayco makes good belt at a decent price.
  18. GM.A.Tech
    26 Feb, 2015
    good price good shipping time good product
  19. stusta
    22 Feb, 2015
    Perfect fit. Great price.
  20. Cowboy 88
    21 Feb, 2015
    High quality belt. It's exactly the same brand, size and part number as sold by Autozone, but cheaper. If you are lucky, you don't even have to pay sale taxes. Just be sure to double check part number with Autozone or other retailer to make sure it fit your car since AutoPartsWAY's cross references sometimes can be flaky.
  21. Nicholas Burns
    19 Feb, 2015
    Great quality belt made in the USA and fit perfectly for 2003 Ford Explorer Limited 4.6L.
  22. Stoner
    18 Feb, 2015
    Nice product.
  23. mike884
    18 Feb, 2015
    Needed to replace a belt on a 2008 Hyundai Sante Fe 2.7L and this fit the bill. The price is right and quality is good. Always had good experiences with dayco belts.
  24. D. Cupka
    14 Feb, 2015
    it fits.
  25. Teacher
    11 Feb, 2015
    Good price and fit perfectly.
  26. Vinny
    01 Feb, 2015
    Perfect belt for my 2008 LR2 Inline 6 engine.
  27. packit
    27 Jan, 2015
    fair price
  28. 907Swagger
    26 Jan, 2015
    I went on the actual "Dayco" website for a good fit. It is different from the AutoPartsWAY recommendation.Easy to install on my 95 explorer
  29. mike decker
    25 Jan, 2015
    great price,great product
  30. Stephen Craig
    13 Jan, 2015
    Fit my 1998 Dodge Ram Sport 4x4 5.9l perfectly. Nice and quiet now. AutoPartsWAY price was about $15 cheaper than local auto stores.
  31. greg
    11 Jan, 2015
    Works as it should
  32. Bob Sandefur
    10 Jan, 2015
    Great product...Great price...Fast shipping.
  33. Alexei
    07 Jan, 2015
    Fits right in to toyota camry 99 4 cyl engine. Seats well on the pulleys. It took me a few minutes to install it.
  34. David Berry "dberry1052"
    03 Jan, 2015
    well made perfect fitment
  35. Upper Michigan user "Joygear"
    16 Dec, 2014
    Perfect. Shipped quickly.
  36. K. Smith "CakeLady"
    14 Dec, 2014
    Good belt for Matrix XR, does not fit my XRS.
  37. Chris
    14 Dec, 2014
    Was a little hard to find the non-ps non-ac belt on AutoPartsWAY. I was really hoping to find it from gates or Goodyear but this looks like it will hold up well. Time will tell going forward but the price is right and the fit is correct.
  38. Alex
    12 Dec, 2014
    Worked well on my 2000 Ford ranger 2.5l, no tools needed other than an open ended wrench.
  39. edgexsnoglobe
    08 Dec, 2014
    Fits great
  40. AutoPartsWAY Customer
    05 Dec, 2014
    Just what i needed and fast on delivery
  41. Steven DeRocher
    05 Dec, 2014
    exactly what I wanted when I ordered
  42. Luis
    03 Dec, 2014
    no picture, no problem... excellent fit !!!
  43. Ron Meinhardt
    30 Nov, 2014
    Arrived as expected. Good quality belt, would buy again.
  44. JP
    16 Nov, 2014
    no more squeaks!
  45. Jerry D. Jones
    16 Nov, 2014
    The right belt shipped and received on time! Great price as well.
  46. Bubba
    11 Nov, 2014
    good fit
  47. TheGoodBuyer
    10 Nov, 2014
    I received a Dayco Gold Label-Diesel Grade Design belt. The generic sizing is 8PK2415. The belt looks well made and installed without issue, after remembering to slide the skid plate to the side to remove it on a Tundra. The belt threaded on without issue. There is a diagram of the belt routing with the belt packaging though it's easier to pay attention to the original belt routing as you take it off.Some people elsewhere mentioned some belt squeal. I haven't heard a single chirp, even on startup, with no belt dressing used. The belt has been quiet. Would buy again.
  48. R. Lashley
    27 Oct, 2014
    This belt fits the 2001 TOYOTA RAV4 2.0 ( 1AZ ) Engine real good.I have been using different brands of belts, all types for the past 28 Years and I have to say DAYCO is the best Brand Belt there is, NO I DON'T WORK WITH DAYCO, LOL :)RALT&T
  49. Cville MTBer
    26 Oct, 2014
    Installed this today on a 2007 Ford Expedition EL 5.4L. Install is straight forward. 1/2 in breaker bar on the tensioner to release the old belt and install the new one. I recommend removing the air intake between the air filter and the manifold. It only take a flat head screw driver and it comes right off. This allows you to work above the engine to thread the new belt in. I also recommend disconnecting the fan electrical connector and moving it to the side. This allows you to get a breaker bar down to the tensioner pulley.
  50. Tom O.
    24 Oct, 2014
    Just installed yesterday but it is working good so far.
  51. Mudd
    21 Oct, 2014
    Fast shipping, belt met needs
  52. GYPSY THE STEGOSAURUS "GS"
    19 Oct, 2014
    The dayco belts are top notch. They fit great and they last along time. Belts take a tremendous amount of abuse, and with todays cars, one belt does everything, water pump, alternator, power steering, air conditioning. If you lose the belt (breaks) your car is not driveable. Not even a few miles to get home or to a shop--unless its very cold outside. If its night and hot, (meaning you need to use lights and you need the water pump to cool the engine, you need to have it towed.these belts fit properly and are nice and quiet. I always change my belts every 2 years, 24000 miles, its cheap insurance. Then I keep the last one (i removed) in the trunk with the spare tire. You should practice changing your belt and keep the proper tool in the car. Usually its a 1/2 socket driver or breaker bar. You take the tension off the belt by prying the tensioner back and then you remove the belt. You put it on the opposite of how it comes off, (usually a diagram stuck to the...
  53. Peter Prasad
    13 Oct, 2014
    looks like a good fit and quality, have not applied it yet
  54. AutoPartsWAY Customer "Chelle'"
    13 Oct, 2014
    Perfect fit for my BMW Z3 Roadster
  55. tom4416 "bookie monster"
    05 Oct, 2014
    Hey, it's a belt and it fits the car it was intended for. Pricing was the sole determinant of purchasing it through AutoPartsWAY and my two day Prime delivery was just a bonus.
  56. Abdulkareem Hassan
    28 Sep, 2014
    Fantastic. Well made and fits my E90 330i perfectly. Even better that the stock in my opinion.
  57. Ariel
    27 Sep, 2014
    Perfect fit on my 07 Lexus is350!
  58. Matt T
    24 Sep, 2014
    Dayco makes good belts. I have always had a problem getting alternator/ac belts on my 94 and 95 preludes... So I always get one that is 1/2" longer than what it says in the autoparts computer and it goes on and works just as it should. Powers my alternator and AC compressor.
  59. Ramon Figueroa
    24 Sep, 2014
    well worth the purchase.
  60. Samuel
    14 Sep, 2014
    I used this belt after the manufacturer recommended belt for my grandfathers '98 Dodge Dakota ended up being a couple inches too short. His A/C unit was going out and he just wanted to bypass the whole thing instead of replacing the unit. This belt was referenced in a youtube video of someone doing the same thing. The belt fit perfectly and arrived on time. The only thing is that the belt we got did not have the cross-way grooves that were visible in the picture.
  61. Exodus
    10 Sep, 2014
    Installation was spot on, length was spot on, belt feels good quality and is very quiet. would recommend
  62. Robert M
    10 Sep, 2014
    Seems to have eliminated a squeal on cold starts I was experiencing on my Avalon. I would use for older cars that could have slop in the drive line.
  63. SR
    06 Sep, 2014
    Works great. Replacement for a 25 year old Corvette.
  64. Gman
    06 Sep, 2014
    seemed to work just fine and made of good quality material
  65. C. Mcgovern "CM"
    03 Sep, 2014
    I have a 2005 Pontiac Grand Prix GT, 3.8L engine. This fit great.
  66. Mac MacPherson
    28 Aug, 2014
    spot on just the job no problem fitting it all went well very pleased as I could not buy one from the UK although the car is Britishthanks regards Mac
  67. Boxcar
    28 Aug, 2014
    This belt is for the A/C compressor, it is NOT the accessory drive belt for the alternator, power steering and water pump. It fits perfectly if installed correctly. To install you must slide it behind the crankshaft pulley and then install it on the compressor and tensioner and after compressing the tensioner you can then get in onto the crankshaft pulley. You must remove the accessory drive belt to replace this. You will need an 15 mm wrench for the accessory drive belt tensioner and a 3/8 ratchet for the A/C belt tensioner and you will also have to remove the plastic front splash shield, 15 mm bolts, and work from the bottom to replace the A/C belt.
  68. Bloose
    25 Aug, 2014
    Perfect fit on my sons '83 Mustang with the V6 and AC. It's been on all summer and has been working well. It runs quietly and we've had no issues at all with it to this point.
  69. Raymond Norton
    18 Aug, 2014
    Very sturdy belt, handles heavy loads. Including high amp alternators.
  70. Dan Price "desert dan"
    17 Aug, 2014
    I have been sold on Dayco Belts and Hoses for 30 or more years. "Top Cog" Dayco belts were on my truck nearly 20 years! The quiet design serpentine belts are great. If I ever move back to snow country Dayco snowmobile belts will be my choice also.
  71. Marilyn Schultz
    14 Aug, 2014
    Good prices
  72. Ed Duce
    12 Aug, 2014
    Good choice and fits perfectly on a 2000 SAAB V6.
  73. Tom
    07 Aug, 2014
    It fit my Crown Vic no problem.
  74. Pro-ecotime
    01 Aug, 2014
    replaced old belt - works and fits fine !
  75. Rafael M.
    29 Jul, 2014
    Installed along with new compressor, working without glitches. Thanks for the great savings AutoPartsWAY!
  76. AT9568
    27 Jul, 2014
    I personally haven't noticed the squealing. It's been on my car for over a week now and seems to be doing its job on my 97 Chevy Tahoe. Seems to be a great product at a great price.
  77. samuel
    26 Jul, 2014
    It great
  78. mrjj
    22 Jul, 2014
    fit good
  79. Gene Lair
    22 Jul, 2014
    just what I wanted
  80. Jodi Cleveland
    20 Jul, 2014
    work great easy to put on! perfect fit on my 99 dodge dakota! without A/C!
  81. RICHARD W MULLINS
    19 Jul, 2014
    What can I say. It's a Belt. It fits great.
  82. Big John
    16 Jul, 2014
    It's a belt. Went on easy and seems to be doing it's job.
  83. DeEntre
    13 Jul, 2014
    Good belt
  84. donald floyd willingham, sr.
    11 Jul, 2014
    great
  85. Gregory
    11 Jul, 2014
    Good quality belt for a fair price!
  86. j
    09 Jul, 2014
    Very good belt .I came across this make of belt wile looking for other parts . Reading all positive reviews i decided to give this belts a try. impressed
  87. cfeagans
    06 Jul, 2014
    Great price on a replacement belt and it arrived very quickly because of my AutoPartsWAY Prime account, which made for planning a maintenance day on my Ford Escape very easy.
  88. shadow31071
    04 Jul, 2014
    Fit perfectly and was priced right. Will buy again if needed
  89. luis del rio
    04 Jul, 2014
    good
  90. diverdude
    03 Jul, 2014
    Once I replaced the old belt with this new one it squealed quite a bit. I tightened the new belt a few times and it continued to squeal. Finally, after about 1100 miles it has finally stopped making noise. Also, after a Google search I found that it is very common for new belts to squeal on the 4.0 Jeep engine. Gosh, that noise is horrid!!
  91. AutoPartsWAY Scott
    02 Jul, 2014
    Bought a cheaper belt first and it squealed. This belt is good quality andwas a perfect fit. Dayco is a great manufacturer.
  92. Grant
    28 Jun, 2014
    I always have good luck with Dayco belts. They seem to be heavier material than some of the other brands and seem to hold up well.
  93. P. O'Riley
    25 Jun, 2014
    The Dayco Belt came quickly and was exactly what I ordered. The Dayco belts hold up well. I should know I am a mail carrier and having spare belts and parts on hand in case of breakdown is a necessity for me.
  94. AutoPartsWAY Customer
    25 Jun, 2014
    Dayco is a name that you can trust. Never a problem with Dayco belting or hoses always good quality and right fit. Daycos web site for proper fit of the belt or hose you need.
  95. Kindle Customer
    20 Jun, 2014
    Same belt and same Dayco part number as the aftermarket part I got for my boat, just 65 dollars less.
  96. MakeItSo#1
    12 Jun, 2014
    It took under 10 minutes to replace this in my 2003 Expedition EB 5.4. Fits and works perfect. No complaints!
  97. wdt
    09 Jun, 2014
    I purchased AC Delco belts that started to squeal in a few months. After reading reviews and the construction of the Dayco belts, I decided to give it a try. Dayco Belts are working Great. I will buy Dayco in the future when needed.
  98. Jon P. Laird
    06 Jun, 2014
    Wasn't familiar with the brand, but the price was super. Delivery was very quick and the spouse quit worrying about losing the a/c during our hot Arizona summer.
  99. Big Jim Swade
    02 Jun, 2014
    I got this for my 2001 Disco without ACE. Fit perfect and was noticeably quieter that my OE LR belt that I removed.
  100. Will
    02 Jun, 2014
    I was skeptical about getting this on line but trusted the Dayco name that usually carry and produce very well made products. Fit my Charger like a charm and a little elbow grease and strength.
  101. Lee Wilson
    31 May, 2014
    high quality, as long as it is not an emergency i will always buy parts online, local parts stores screw you because they know you need it NOW. bad thing is they can't help you figure out exactly what you may need, nor do they usually care.
  102. dejan
    30 May, 2014
    great belt will last and this almost 10 cheaper than auto zone perfect fit for 2010 nissan altima 2010 would buy again and this isnt cheap rubber this is better than oem part
  103. T. Brown
    28 Apr, 2014
    It's hard to say that you can "love" a belt, so I'll say I like this one just fine. I prefer to spend a few extra dollars to get better quality parts, and a serpentine belt is no exception. It took me and a buddy less than a minute to take the old one off and about a minute to put the new one on after we changed out the alternator (even though I managed to pinch one of his fingers in the tensioner).
  104. ali65
    25 Apr, 2014
    Since this is the same as the original, which lasted about 110000 miles, I am hoping this one will not disappoint.
  105. Corey S.
    23 Apr, 2014
    Seems like a good quality belt. Does not squeal after installation, fits the car as expected, and survived my car's brief attempt to destroy it.
  106. MacLean Consulting
    21 Apr, 2014
    outstanding belt with a great price....I bought to replace a tired belt with a small cut in it so it worked great
  107. Binh Duc Ho
    20 Apr, 2014
    This Dayco belt # 5060436 along with # 5040333 fit perfect for my dad 2004 Nissan Sentra 1.8L engine with AC. I've been doing maintenance on my own vehicles for more than 30 years and found Dayco belts are excellent quality, made in USA is a plus indeed, along with can't be beat AutoPartsWAY price is a win win purchase.
  108. Jesse
    20 Apr, 2014
    This worked great for my 2008 Mazda5. The A/C stretch belt must be cut to get this belt on so buy that as well. For the stretch belt use the special tool from Gates but don't use the guide bolt as it won't fit the harmonic balancer pulley on the Mazda 2.3 engine.
  109. Larry
    18 Apr, 2014
    Fit right on my '97 GMC 3500 w/ the 6.5 turbo diesel. (Was a little hard to get on, since it was tighter than the old belt I removed.) Seems to be of good quality.
  110. H. F. Sawatzky
    12 Apr, 2014
    Installed on a 2005 Jeep Grand Cherokee 5.7 Hemi. Great fit and quality. Just make sure you remember how the darn thing gets routed through all the pulleys.
  111. C. Gelsinger
    25 Mar, 2014
    With everything running on one belt these days, it only makes sense to have a spare belt in the car with you. In case of a break down, you can probably find someone to install a belt, if you cannot do it yourself. Finding the replacement belt can be costly, time consuming or just impossible.
  112. Lee Baron
    15 Mar, 2014
    Exact fit great quality...Good information regarding size and fit. I would recommend this brand and site to friends and family.
  113. 1953 Woody
    09 Mar, 2014
    Bought this because it was Dayco and they seem to have a good reputation. Will review again after it's been on my van for 12 months.
  114. Todd
    08 Mar, 2014
    Quiet fot a serpentine belt. Great fit and a great price. I recommend Dayco to everyone. They make a superior product. The price js great and shipping was fast.
  115. david finley
    04 Mar, 2014
    Good fit. Looks like a good belt. I didn't have any problems installing it. Let's see how long it lasts.
  116. J. Lawrence
    04 Mar, 2014
    This belt fit well and seems to be of good quality. It's not the best belt I've seen, but for the price it should be more than fine.
  117. T. Singer "JBS"
    22 Feb, 2014
    Great product, perfect fit, quieted the car down immediately, highly recommended. Take a picture of the existing belt before you put this one on.
  118. CK in VA "Carl"
    19 Feb, 2014
    Emailed supplier about the differences in belt numbers. One indicates AC and the other does not. Great to know before you order which is supposed to go in your vehicle.Brand new belt. Shipped on time. Arrived in great shape. Great deal. Great brand. Five stars!
  119. Mitchell
    07 Feb, 2014
    Needed to replace a worn belt on my 2008 Honda Ridgeline. Did the job, would buy again. Took about 5 minutes.
  120. HBSurferMan85
    05 Feb, 2014
    Purchased this to replace my belt. My only concern was the letters on the end of the part number was not on my existing one, but after going to there website it is the same part.1994 Jeep Grand Cherokee V8 5.2
  121. Thomas Barnack
    02 Feb, 2014
    It was a good price and a good brand name, I am happy and satisfied with this purchase, Good Value....
  122. qship96
    31 Jan, 2014
    What else can you say,it does the job and after 60,000 miles of use,it still is.Better value than the dealer supplied part.
  123. AutoPartsWAY Customer
    25 Jan, 2014
    Purchased at the same time as a new water pump drive tensioner to replace the failed water pump tensioner. Installed and fits perfectly on my 2000 Mercury Cougar.
  124. Shatrupal Chavan
    24 Jan, 2014
    It's perfectly fit to my car. Got it by DHL very easy to collect and relaxing shopping. Keep up the good work
  125. Henry Bowman
    15 Jan, 2014
    I bought this to replace an old belt on a GM 5.3L GenIII V8. Installation was simple. The belt itself looked very similar to the belt that was one there and quality appears to be excellent. No odd noises have been encountered since installing this - no humming, buzzing, squeaking, whining, or chirping.
  126. Jemille R. Hardy
    13 Jan, 2014
    hey it is a good buy for this old vehicle and did not take long to install, fit perfectly and now runs smooth.
  127. Frank T Slade (in PA)
    11 Jan, 2014
    1995 Chevy K1500 5.7 164kDayco 5060955 Poly Rib fit perfectly on the truck and have run several hundred miles w/o any issue. AutoPartsWAY price over $10 less then local auto part stores. Good deal.
  128. Michael D. Smith
    10 Jan, 2014
    I have a BMW M3 and you can tell by visual inspection how much better Dayco is than Contitech. For BMW's you are limited as to the different brands that manufacture the belts. This is only for the A/C. If you want the Drive belt for Dayco it's hard to find online. I did a bit of research and found out that Dayco Drive Rite 5060613DR Serpentine Belt is the correct belt for my car. Hope this saves ppl some headache trying to locate Dayco. From the research I did, Dayco belts last 60k miles whereas Contitech belts only last for 30k miles.
  129. johnnyboy77
    31 Dec, 2013
    Works perfect! New materials it's also cheeper than local auto parts store. Recommended to everyone who needs this product. Thanks.
  130. Christopher
    30 Dec, 2013
    Time will tell. The original belt was 15 years old and still serviceable but was starting to get transverse cracks and show some cord on the flat side. I hope this one lasts as long.
  131. Damian Harouff
    26 Dec, 2013
    Worked fine on my 99 Mercedes E320. Seemed to be good quality, tracks well on the pulleys. Recommended, especially since your local auto parts store is going to have a worse-quality belt for more money.
  132. RichardC "vcrs"
    21 Dec, 2013
    Dayco belts are excellent quality at a good price. Perfect fit. I will continue to buy Dayco belts for my cars.
  133. melingland
    20 Dec, 2013
    Fit perfect on my 2002 ford focus wagon ztw. Great price for a belt the quick lube can charge you $45.00 or more.
  134. miss monkey
    11 Dec, 2013
    Fits perfectly (2006 HHR 2.2L) and no issues. High quality product at a very reasonable price. No disappointments and no regrets.
  135. Gerardo Hernandez Galarza
    07 Dec, 2013
    Great does not make noise, finally. I had changed the belts 4 times and always noise, not any more. Very recommended for a Suzuki xl7 2004.
  136. Gerardo Hernandez Galarza
    07 Dec, 2013
    Great does not make noise, finally. I had changed the belts 4 times and always noise, not any more. Very recommended for a Suzuki xl7 2004.
  137. Travelin' Dan
    01 Dec, 2013
    Quality belt. I have not installed it yet, but have it as a backup for my next project of replacing the tensioner and belt. As usual, AutoPartsWAY came thru with a great price and in stock product.
  138. Steve N "Straussjoe"
    22 Nov, 2013
    Superb! It matches the OEM belt exactly...down to the 5061030 number embossed on the belt. I had the old belt removed and the new one installed in under 15 minutes. A word of advice: Get a long and slim prybar to extend into the pully tensioner area as there is not much room to work in that tight area in a Windstar. You can easily use the pry bar to prop up the tensior while removing the old belt and again when installing the new belt. Superb product. Save yourself about $120 and do it yourself!
  139. steve
    14 Nov, 2013
    price was great and my mechanic said it was top quality so have nothing to complain about this AutoPartsWAY product
  140. P.S.
    14 Nov, 2013
    its a belt, and it fit and it didnt fly apart, what more could you want? dayco is always a good brand
  141. Vincent
    12 Nov, 2013
    I chose a five star rating from past great experience using Dayco products.I replaced both belts on my 2007 Dodge Caravan 2.4 litre engine.I havn't had any issue's since installing these belts. Its been over a year since the install.I highly recommend this product.
  142. Sierratango
    08 Nov, 2013
    Good quality replacement serpentine belt for my 95 Nissan Altima. It is significantly less expensive than the auto parts stores.
  143. Diane
    08 Nov, 2013
    tensionerIt's too early to tell for certain but I think this belt along with the new Dayco heavy duty belt tensioner are going to solve my problem with my 97 Dodge Ram 3500.I was going through a belt and tensioner once a year. My mechanic says this belt seems to sit on the tensioner pulley more squarely (my understanding of what he said, not his actual words).
  144. J. F. Williams
    08 Nov, 2013
    I have run this belt for one thousand miles, this belt is very quiet. I would but this belt again.
  145. Stephen G Cox
    01 Nov, 2013
    These belts resist the noise these engines start to make at high mileage when the pulleys tension gets a little weak. These type belts cost a little more but seem to hold off that noise. Its worth it.
  146. h2o
    30 Oct, 2013
    I always keep an extra in the trunk, just in case you happen to "throw a belt" or "break a belt" while out driving or on a vacation trip..Good car maintenance will keep you from breaking down, but having an extra belt...this is a must...especially if your miles from anyhelp or driving at night...well worth the money to have an extra...made of good quality material right here in the USA....
  147. B. Valentine
    30 Oct, 2013
    This is a seemingly well built piece and the installation was OEM in nature. it was simply a bolt on part. (generic review for car parts)
  148. twiggy02919
    25 Oct, 2013
    This belt fits perfectly in my 2000 Toyota Sienna van. The old belt I removed was Toyota OEM which was this same model Dayco Belt with the Toyota brand stamped next to it. So I got this belt from AutoPartsWAY/Dayco for less than half of what it would cost from Toyota for the same exact part.
  149. streetsense
    20 Oct, 2013
    I did a lot of shopping around for the exact correctly fitting belt. I am ready when the old belt breaks.
  150. Just Another Trumpet Player
    16 Oct, 2013
    The belt fit my 1998 Jeep Cherokee 4.0 perfectly and has worked fine for nearly two years now.What more is there to say?
  151. chuktuk44
    04 Oct, 2013
    This belt is made by Dayco, one of the leading makers of automotive parts in the world, of course I love the product, who wouldn't. Great parts like this give you peace of mind when doing your own auto repair.
  152. TRU
    20 Sep, 2013
    Purchase this item and installed it a little over 2 years ago today. Product still looks new and in tact just like it came of the floor shelf. Definitely recommend this Dayco product!
  153. WNYer
    20 Sep, 2013
    Great service and fast delivery. First I went to the Dayco site to confirm the proper product code before I ordered on AutoPartsWAY. Here's a hint, fit the belt on the farthest pulleys first then over the water pump pulley last - no groves.
  154. Roy
    16 Sep, 2013
    This serpentine belt fit my vehicle perfectly and was easy to install after watching a "How To" video on line. I am pleased with this purchase and saved money doing the job myself.
  155. Menno Aartsen "MEA"
    14 Sep, 2013
    All I can say is that on an older Durango or Dakota, doing this relatively cheap bit of maintenance - belt, plugs, coolant - is very worthwhile. I have no way of technically comparing the factory Champions that were in my 2003 Dodge Durango SLT 4.7 with compatible plugs. I replaced the serpentine belt at the same time I did the plugs, and as the new belt had half an inch less diameter than the old one, it is possible that the old belt was slipping a bit. All I can tell you is that, after resetting the PCM (propulsion control module) on the car, its V8 is much smoother and quieter than it's even been (I bought it used at 65,000 miles, it now has 97,00).
  156. Dr. Doom
    12 Sep, 2013
    This belt is listed in many places as being the correct belt for my car (2008 Elantra GLS) but it is way too short. At least I discovered that my water pump is totally shot so I will order a different belt and a water pump and replace them together.
  157. N.
    06 Sep, 2013
    Bought this belt to replace a belt that was getting old and a little weather checked.The dealership wanted a hundred bucks to swap out the old one. This cost be $20 and took about 10 minutes with some tools (only needed a long breaker bar and a clamp).
  158. T. Johnson "ti johnson"
    24 Aug, 2013
    excellent fit - very durable construction/longest lasting - will not slip / even when soaked - best value available anywhere...Dayco engineering is the best & it shows.
  159. nike
    22 Aug, 2013
    Better than OEM belt on my Honda. Accord at a fair price! Easy to install! Cheaper than at local auto part store'
  160. Morkgto
    26 Jul, 2013
    Fit 2005 F250 single alternator no problem...appears to be a sturdy belt very similar to factory one. Will purchase again if needed
  161. savvas korakas
    25 Jul, 2013
    Made in USA. That's a 5 star by itself. Best warranty on the market (3 yrs). Quality is by far the best in the business. Like i said, American from top to bottom, and price was a steal. Good Job Dayco. Keep some jobs in our country.
  162. Ruben Velez
    21 Jul, 2013
    Dayco its one of the best belt around and the prize was right i purchase it with the harmonic balancer
  163. Darren DeLaup
    20 Jul, 2013
    I was told at the auto parts store that this was the better quality brand of belt. When I saw it on AutoPartsWAY, I grabbed it. Could not beat the price for a high quality part.
  164. Bob Tucker
    08 Jul, 2013
    Yeah, these need to be changed every so many years/miles. Mine was squeaking and squealing and for the longest time I thought it was the A/C compressor or alternator or something, but turns out it was only the fan belt. It's been on my vehicle for several months now and is doing the job well. Very pleased.I must mention though that the first belt that arrived was the wrong one, even though the packaging had the correct part number on the side. It did not match what was actually in the package. When I called AutoPartsWAY, they sent me a replacement OVERNIGHT. VERY VERY please with how AutoPartsWAY handled this!
  165. Heisenberg
    06 Jul, 2013
    I ordered this belt for my 2002 toyota tacoma prerunner 3.4L. It was cheaper than getting it at my local Autozone. Thanks.
  166. Heisenberg
    06 Jul, 2013
    I ordered this belt for my 2002 toyota tacoma prerunner 3.4L. It was cheaper than getting it at my local Autozone. Thanks.
  167. Heisenberg
    06 Jul, 2013
    I ordered this belt for my 2002 toyota tacoma prerunner 3.4L. It was cheaper than getting it at my local Autozone. Thanks.
  168. Rob Z
    03 Jul, 2013
    I originally purchased all OEM AC Delco products for my 6.5L Suburban. I found this belt to be quieter and have been very happy with it. I was replacing pulleys and still having the chirping. Finally tried this belt and it is quiet again!
  169. Scot N Kenkel
    03 Jul, 2013
    I know VERY little about cars, so when my 99 Ford Taurus lost power steering, battery power, and began overheating like crazy I was scared of the prospective repair bill, and wondered: "is this the end of my beloved "tortoise". Thousands in repair bills loomed... But, NO!! Turns out the old belt (which controls pretty much everything) had slipped off. Luckily, this belt is Poly-Ribbed for your car's pleasure. Installation was easy with an extra set of hands. And, with more grip, no more slip! She is now one happy car and sure to go for at least 100k+ more miles. HIGHLY RECOMMENDED!
  170. rayman59
    24 Jun, 2013
    Put this on my wife's 2001 Pontiac Grand Prix 3.8L v6 supercharger after the old pulley bearing froze up and shredded the old one. Fit perfect just like it was made for it!!!!!!
  171. duc le
    13 Jun, 2013
    I have been using it for six months..this time it's still OK and works very good. I will share some information with my friends.
  172. JAMES GASSER
    12 Jun, 2013
    This belt seems like it is a better quality belt then the OEM belt. It is very quiet so far, but of course time will tell. The stock belt was $120.00 from the dealership and 1 hour labor at $100.00.to install a new one.
  173. USCGsnipe
    12 Jun, 2013
    Pretty Standard serpentine belt. Install it and drive until it needs to be replaced again. The price on this one is great and shipping was a breeze. No defects or questionable quality. Great belt, great product, great company.
  174. RYAN HOFFMAN
    10 May, 2013
    Great quality belt you can tell as soon as u look at it. Came fast and easy to put on so I give it 5stars
  175. James T
    26 Apr, 2013
    Great belt, good quality. I have used these belts on other cars and none have ever failed. Would recommend this product.
  176. J. Lafrenz "kahuna1342"
    17 Apr, 2013
    Fit just fine in my 1999 Tahoe. Seems to be very quiet and smooth. No problems at all and the price was good.
  177. Owen Shiverdecker "Owen"
    26 Mar, 2013
    This was a easy 10 min. install on my 2.0 Jetta, The belt appears thick with a abrasive surface for mating up.
  178. Sam Valcaniant "svalcaniant"
    15 Mar, 2013
    Product arrived early. Great price when compared to other local part stores. I would recommend this vendor for auto parts.
  179. J. F. Vogel "Road Runner"
    06 Mar, 2013
    Dayco is an excellent brand of serpentine belts. I have used them on most all cars and trucks that I have owned and they have performed well. Teamed up with AutoPartsWAY is is winning combination.
  180. TSS66
    02 Mar, 2013
    What can you really say about these after market parts. It fits and it works okay... so far. I'll update this review in the future if something goes wrong, but I doubt it. Price was 1/2 that of the OEM brand.
  181. Ace Cool "Joe"
    27 Feb, 2013
    One continuous loop with no beginning or end, cool how that works. Reminds me of how our politicians operate. They keep doing the same thing over and over. Its time for change, not this iffy changey kind of stuff.
  182. Kam14
    27 Feb, 2013
    Purchased for my 08 Subaru Outback and it went on without a problem. Appears to be a high quality belt.
  183. M. Crane "CRANK13"
    09 Jan, 2013
    I cannot believe that this belt was only $7.74! What a great product at such a reasonable price! Thanks AutoPartsWAY!The belt itself is of a high quality, with the reinforcement fabric visible. Compared to the exact same belt that you can buy at your local auto-parts store, this is the better choice, by far!
  184. RST
    07 Jan, 2013
    What can you say about a serpentine belt? It works great, fits perfectly. Easy to install with a socket wrench and a pvc pipe extension.
  185. Christop82
    24 Dec, 2012
    the belt is well made and fit very snug. if your going to replace yourself, i would recommend using a serpentine belt tool. it was difficult to do with a standard ratchet.
  186. pastrol
    08 Dec, 2012
    It was a perfect fit for my 2005 Altima, 2.5S. I now have a smooth a quiet ride. Dayco makes good quality stuff so I will see how well this one holds up.
  187. bigme07
    18 Nov, 2012
    Not sure what to say besides it was ontime and as advertised. I will be buying another one for the truck when I hit 200,000 miles.
  188. John E. Heyer
    31 Oct, 2012
    I used this belt on a 2004 Subaru Forester XS, paired with a . The old belts were made by Mitsubishi and were slightly stiff with small cracks, so after 35,000 miles, they definitely needed to be changed out.The Dayco belt appears to be good quality and went on without a problem. I've noticed less whistling / chirping when the car is idling, so it was money well spent. We'll see how they hold up.
  189. EddieE
    19 Oct, 2012
    Great item and fifteen bucks cheaper than the local auto parts store, with free shipping. Replaced the older belt perfectly on a 4.6L engine, no problems installing at all, 15 minutes and it is done. I would recommend this belt, great price and excellent quality.
  190. dan el man
    10 Sep, 2012
    was in the process of placing in an alternator and decided to swap belts, this one fit perfectly and had the right amount of ridges....3months later and no squeaks or rattles....works perfect....
  191. R. taran
    14 Aug, 2012
    Less cost than any parts store & fast shipment. Much easier to buy parts here than standing in line at the local auto parts store dealing with lazy, incompetent employees.
  192. NonstopInk
    14 Aug, 2012
    I purchased this belt for my Hyundai sonata 2004.After about half an hour of putting it on, the car didn't squeak anymore.It's been several months now and haven't had any issues, but of course if I do - I'll be sure to come back and update the review.So far so good.
  193. NonstopInk
    14 Aug, 2012
    I purchased this belt for my Hyundai sonata 2004.After about half an hour of putting it on, the car didn't squeak anymore.It's been several months now and haven't had any issues, but of course if I do - I'll be sure to come back and update the review.So far so good.
  194. G. Forster
    23 Jul, 2012
    This belt is for my 2003 Mazda MPV with the Ford 3.0L V6. The original belt lasted 180K miles, and still looked pretty good, but the water pump belt was looking rough, and we had the summer vacation coming up, so I felt it was time to replace both belts. The pulley was replaced at the same time.Be sure to take a photo or carefully diagram the path of the belt, so that it goes back on as easily as it comes off. The whole project (both belts and a pulley) took less than an hour. It's a perfect fit.
  195. J. Podvin
    09 Jul, 2012
    It does what it is supposed to. What more can be said? I bought this for a 2004 F250 with a PowerStroke diesel motor. Fits perfect and takes up the slack that my tired old OEM belt had after 90,000 miles
  196. BA
    11 Jun, 2012
    The belts worked fine on my BMW 330i as soon as installed. No issues that. I'd recommend them to DIY community. Made in the USA
  197. Green Bastarde'
    25 May, 2012
    This product fits my 1997 jetta tdi perfect! I hope this review helps you decide if this item fits your motor. 1z diesel 1.9 TDI
  198. Greer Evans "Greer Lee Evans"
    23 May, 2012
    I purchased this belt to replace one that was soon to snap leaving me stranded and having to wait on a tow truck. It is still in good shape after 10,000 miles. It had a nice warranty and so far so good.
  199. Gearz
    22 May, 2012
    I use Dayco belts on all of my vehicles because they are the best belts on the market. When i received my order the belt container said Drive Rite on the package but in small print it says it is manufactured by Dayco so make sure your getting the best belt and check that it is made by Dayco.These belts are quite and last a long time and resist piling and cracking.
  200. CUONG
    16 May, 2012
    This serpentine belt fix with my car,and made from USA,good quality as I expected,I will order some to spair for my cars.
  201. phil900
    15 May, 2012
    I've used Dayco belts for years and have found them to be the most durable of all the major brands. They stand up well to oil and water exposure (though none of those things should be exposing themselves to the belt).
  202. dcfolsom
    10 May, 2012
    This belt at under $10 is the exact same belt I paid 28 for at one of the discount auto parts stores 2 years ago. Shipped quickly and branded with manufacturer's name, and you will recognize it.
  203. A.J.
    22 Apr, 2012
    The title says it all - This product fits and works perfectly on my car, a 2002 Pontiac Grand Am SE1 with the 2.2L Ecotec 4 cylinder. Installation was also very easy. Take off the right front wheel, remove the plastic access panel in the back of the wheel well, lift up on the tensioner to release the belt, slip off the old one, and reverse that process to install the new one. Another great thing - this belt is made in the USA.
  204. Ray Saez, Jr
    12 Apr, 2012
    Quality belt, fit my custom application just fine. Did my homework and figured out what length I would need after deleting my smog pump and purchased. Better price than my local auto parts store too, even after shipping.
  205. Dom
    30 Mar, 2012
    Purchased this belt as a precautionary measure when replacing my alternator. It was a perfect fit, but if you don't tension it properly it will turn some heads of attorneys that you work with so you can hang your head in shame while they are all driving new Mercedes SLS's and you're pulling away in your 5 year old Yaris.
  206. blues217
    20 Mar, 2012
    Serpentine Belt Great fit and Price. Shipping was fast. All around great transaction. We will see how long it last because this goes on a old trash truck that sits out in the elements.
  207. Y. C. LIU
    12 Mar, 2012
    The belt is a great fit for my 1998 Toyota Camry LE and was installed for AC compressor and alternator. I was pleased to replace it with Dayco product. It is a good belt so far.
  208. Y. C. LIU
    12 Mar, 2012
    The belt is a great fit for my 1998 Toyota Camry LE and was installed for power steering pump. It is a good belt so far.
  209. Air450
    04 Mar, 2012
    I have an offroad car and the dirt and sand wear out the belts fast. These work great and I buy extras. Fast delivery and great service.
  210. Elderly Person
    12 Feb, 2012
    I paid $7 total for this belt which sells for $15 to $20 at various local auto supply stores. It was on my front porch 2 days after I ordered. Dayco is an old US brand. Also, all these type belts are made to an SAE specification. The quality of this belt appears every bit as good as two other OEM Nissan belts I got from the dealer.
  211. Jim
    05 Feb, 2012
    Bought this belt at local autozone for my 07 dodge dakota, no problems at all so far, fixed the squelching noise which is consistent with a loose/worn belt, power steering improved which again is consistent with a worn belt. Nothing fancy, does what it was designed to do, no actual improvements, just new.
  212. D. L. Dawson
    29 Jan, 2012
    This has to be the longest belt I have ever installed. There seemed like a dozen pullies it went over and under. In the end though it fit exact and was quiet.
  213. Jemmie Wang
    21 Jan, 2012
    Fan belts are not rocket science items. They're the kind of thing that you only hear about if it breaks or does not fit.Dayco's ribs are not entirely level, by design - they have slight grooves on the ribs. I think it's so that when it goes around curves there's less compression and stretch on the ribs. Hopefully that increases its longevity.This was for my 2000 BMW M5 and it fits and works perfectly. That's all you need to know.
  214. me
    18 Jan, 2012
    The belt seems to be good quality and is doing the job that I needed it to at a discounted price compared to my local parts house.
  215. Gary J. Weldele
    16 Jan, 2012
    I don't know how they got that belt to me for that little money!!! But Great Service and Better price!
  216. AutoPartsWAY Customer
    18 Dec, 2011
    This product does what it is supposed to do. I use it on my 1950 Studebaker pickup truck. Fits my serpentine system fine.
  217. Andrew B. Moore
    09 Dec, 2011
    I bought this for my wife's 2004 Corolla which had an old, squeaky belt (in rainy weather). I heard good things about Dayco, so went with this item. I can't say much about durability because we sold my wife's car a year later, but it worked perfectly and silently during that year.
  218. TexasHammerhead
    06 Dec, 2011
    This belt was ordered for a 1991 Ford extended cab with a 460 with A/C, Power Steering and worked great. When I bought the truck the A/C was bypassed, so I had to replace the compressor and belt. I was worried it wouldn't fit but it actually did! I double checked the fitment on another auto parts site before I ordered just to make certain.
  219. Bill Tanner
    28 Oct, 2011
    This was a good OE replacement for my 2005 Acura TSX. I don't know if it's better or worse than any of the others available, and if you were to buy on price alone, I'm not sure where this would slide in. This review is after the fact as I replaced the belt sometime back during the early summer I think. That said, I usually do quite a bit of research before I buy, so I must have had a good reason. I'd recommend the belt.
  220. huck finn
    04 Oct, 2011
    I`m very please with this belt. I ended up tring the Gator back belt from Good Year. but this one looks very good. It fit my 1998 Altima GXE WP,ALT, PS.
  221. Steven E. Medved "Steve M"
    28 Sep, 2011
    The belt fits perfectly and is better than the original factory one at a price of half of what the cheap one was at the local auto parts store.
  222. Air450
    11 Sep, 2011
    Works great and looks to have nice quality. I have to replace my belts and have backups because I use these on my offroad car.
  223. Vinnie
    26 Aug, 2011
    Belt is fine, meets OE criteria fits as advertised. Only have used for a week about 400 miles, no issues.
  224. shads-dad
    15 Aug, 2011
    I put this belt in my 1998 Chrysler Sebring convertible. Installing it wasn't much fun because of the work needed just to get to it, but the belt is of high quality. It fit perfectly and hasn't stretched. I've had it on the car for about a month now.
  225. adamspeed
    07 Aug, 2011
    the belt came on time and was the right belt took old one off slip the new one on no problems work great, needed a new belt after 90k the price was great would recommend these product.
  226. Runner1326
    29 Jun, 2011
    Arrived quickly, and with the help of my brother the mechanic, installed pretty easily too. Works fine. Quieter than the one it replaced.
  227. Jake, from State Farm
    26 Mar, 2011
    DAYCO invented the serpentine belt for the Hi-Po FORD Mustang V8 -- and the power-saving properties of the serpentine design were soon copied by auto manufacturers from all over the world !! Along with the power savings, the DAYCO's ribbed contact area and "cog" design provides cooler running, less noise, and longer belt life. I have used the DAYCO 5060980 on 2 different 4.6-liter FORD cars, with over 140,000 miles accumulated without any sign of wear or damage to either of the belts. They run cool here in the scorching Arizona desert, and they're very q-u-i-e-t, too -- with NEVER a squeal or chirp, despite the hottest weather !! See the DAYCO website for tips on how to check for wear, pulley alignment, what to look for, etc. Be sure to check the application chart to get the CORRECT FIT !! AutoPartsWAY.com's low price and speedy delivery keep me coming back !! Thanks, AutoPartsWAY !! Good Luck !!
  228. Max
    13 Mar, 2011
    Used this on my 1998 supercharged camry V6. Held up just fine while I was using it with a 6lb pulley. No complaints - nothing big to report!
  229. Kzziggy1
    14 Feb, 2011
    Used it on two nissan titans and 2005 and a 2007 was easy to change with help from a friend and way cheaper than the dealer, used my tork wrence as a cheater with I think a 14mm on the tensioner pully removed the skid plate under the truck was done in 7 minutes with the second truck! Took 30 minutes doing the first one.
  230. sawandsew
    09 Dec, 2010
    I purchased this dayco poly-rib belt for our 1999 Saab 9-3 vehicle. I picked this belt for the quality as it is a bit more pricey than others but rated better. So far, it has held up well. I recommend 2 people installing this belt on a 9-3 as it is one of the more difficult drive belts I have done. One trick is to make sure the belt is centered well in all of the lower pulleys and also on the idler pulley but just off the upper left-hand pulley before pulling on the tensioner. While one person is pulling the other person can slip on the belt and make sure the belt is centered on all pulleys. This seemed to work the best for me.
  231. A. Trujillo
    10 Aug, 2010
    I bought this for my 1995 Chevy Camaro V6 3.8L with air conditioner. For those who were wondering whether it has it or not, yes this belt comes with AC. Seems very durable and my mechanic said it was a good brand. Buy it off AutoPartsWAY and save a lot of money rather than buying somewhere else. Highly recommend this product if you are in need of a belt.
  232. Big Ed
    07 Jun, 2010
    Daycos Poly W serpentine belt is amazing. I tried everything to eliminate this annoying squeel from my cars engine. Then i read a review on the Dayco PolyW belt and figured id give it a shot. AutoPartsWAY.com had the best price and combined with the purchase of another product i wanted, i was entitled to free super saver shipping! cant beat that deal.
  233. Gregory Chernis
    07 Feb, 2010
    I reached for a replacement belt since I heard a distinct noise from under the hood of my 2002 GTI VR6. Inspected existing belt and noticed cracks.Replaced the belt and the noise was still there, but a little more sustained.Replaced belt tensioner. Since then, all is nice and quiet.
  234. Steven E. Medved "Steve M"
    18 Jan, 2010
    This belt is made in the US and is of better quality than the Toyota one. It is a perfect fit for my 2003 Corolla and after I replaced the defective Toyota belt tensioner assembly and installed the Dayco for the first time ever I have no belt noise.The serpentine belt tool that harbor freight also sells makes the job of replacing the belt easy.Using just the long bar and a 19 MM 3/8 inch drive deep socket on the lug on the tensioner casting you can pull it toward you to cause the tensioner to give enough slack to remove the belt from the alternator. Once you remove and replace the belt you use the tool to give you the slack to put the new belt on the alternator pulley.If you need to replace the tensioner assembly the job will take about two hours vs 30 minutes for the belt only.
  235. Alex
    23 Dec, 2009
    This was the first time I ordered any automotive part online from AutoPartsWAY and I was not disappointed. The belt was the exact size for my girlfriend's Toyota Corolla. The serpentine belt was manufactored in the USA by Dayco. The quality of the belt was excellent. I would recommend Dayco drive belts through AutoPartsWAY without hesitation.
  236. CowBrains
    28 Oct, 2009
    This has 7 ribs w/ 6 grooves which fits my 2004 Acura TSX perfectly. Infact it's actually better than the belt originally came w/ the car. Belt is made in Canada and not somewhere cheap/brittle like China. Japanese belt manufacturers are good too.
  237. Ryan Stein "Scheißeglück"
    25 Sep, 2009
    If replacing your stock OEM belt, this fits perfectly in place. The only issue I had whit this is it squeaks like crazy when first installed, and squeaked for the longest time until I put some belt dressing on it. If you don't want to deal with the noise of this belt, a gator-back style of belt would be better. But, for the cost, this belt gets the job done.
  238. Rusty SA Taylor "RT"
    22 Aug, 2009
    It is nice to know you can get a replacement part for your vehicle without being robbed in the process.It is nice to be able to count on the part comming in the mail is of good quality workmanship.
  239. Phillip Fry
    04 Jun, 2009
    I always use dayco. In my opinion there is no better belt on the market.
  240. m.r.h. "ColemanFlGuy"
    15 May, 2009
    Great quality. AutoPartsWAY.com price was 1/2 that of the auto parts stores near me. Highly recommened.
  241. R. Wilson
    08 Sep, 2008
    Order the correct belt for you vehicle and it will work. I mean, how much of review can you do on a belt. LOL It worked for me.
  242. D. Thurow
    29 Mar, 2008
    Everything arrived on time. The belts and other components fit and worked out of the box. In about three years I will know how well they last.
  243. Rick
    26 Feb, 2008
    This belt is well made and fit perfect with my underdrive cranshaft pulley for my 07 Corvette.

Loading...