2022 Ford Bronco Intercooler Kit 4 Cyl 2.3L Mishimoto
-
Features:
- Direct fit for 2021+ Ford Bronco 2.3L and 2.7L EcoBoost
- Dyno-proven max gains of 5.7 wheel-horsepower and 5.3 lb-ft of torque (2.3L EcoBoost)
- 21.2°F reduction in outlet temperature over stock intercooler (2.3L EcoBoost)
- 7% less restrictive than stock intercooler
- 77% increase in core volume
- 175% increase in fin surface area
- 4.7" thick intercooler design for maximum flow
- Optimal core design for maximum cooling efficiency with minimal pressure drop
- All-aluminum, TIG-welded construction
- Durable bar-and-plate core for superior durability and performance
- Cast aluminum end tanks are precision TIG welded to the core for increased pressure tolerance and reliability
- CNC-machined 6061 aluminum inlet and outlet flanges
- Does not interfere with adaptive cruise control or 360° cameras
- Available in stealth black or sleek silver powdercoat
- Mishimoto Lifetime Warranty
- The Ford Bronco has a heritage of tough, go-anywhere capability. The 2021+ Bronco is no different and deserves a cooling system that can stand up to the task. Here at Mishimoto, we never back down from a challenge, so we developed a performance intercooler to let your 2.3L or 2.7L EcoBoost breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle anything the trail can put in your way. The Mishimoto Performance Intercooler features a 4.7-inch thick core, CNC-machined 6061 aluminum flanges, and precision tig welded cast aluminum end tanks. Combined, this makes for an intercooler that is as robust and ready to take on the world as the Bronco it’s designed for. Compared to the factory tube-and-fin intercooler with plastic end tanks, durability against heat, pressure, and debris on the road or trail is significantly improved over stock. More durability is always a good thing, but it’s even better when it’s backed up with performance. The Mishimoto Performance Intercooler has an increase of 77% core volume and 175% fin surface area, which for the 2.3L EcoBoost, results in an increase in flow of 7% and a reduction of outlet temperatures of 21.2° over stock. These numbers are all well and fine, but what they really mean is that in the real world, whether sitting in traffic or out on the trails, you’ll see improvements in performance. We saw an especially good improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20° cooler than stock. All functionality of adaptive cruise control and 360° cameras are retained. As with all of our products, the Mishimoto Performance Intercooler is backed by our signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|
| 2022 Ford Bronco | L | 2300 | 4 Cyl 2.3L | Everglades | Turbocharged | 140 |
2 In Stock
Limited-Time Offer
$1,516.60 USD
$1,819.92 USD
- FREE SHIPPING on order over $100 USD shipped from same warehouse
- FULL WARRANTY
-
Order 24/7Order online anytime
-
100% SafetyOnly secure payments
-
Hot OffersDiscounts up to 90%
General
SellingPoint04
7-percent Less Restrictive Than Stock Intercooler
TechSpec Pipe Shape
N/a
SellingPoint05
77-percent Increase In Core Volume
SellingPoint06
175-percent Increase In Fin Surface Area
SellingPoint07
4.7" Thick Core For Maximum Heat Transfer
SellingPoint01
Direct Fit For 2021+ Ford Bronco 2.3l And 2.7l Ecoboost
SellingPoint02
Dyno-proven Max Gains Of 5.7 Whp And 5.3 Lb-ft Torque (2.3l Ecoboost) / 6.5 Whp And 6.5 Lb-ft Torque (2.7l Ecoboost)
TechSpec Maximum Recommended Horsepower
N/a
TechSpec Overall Length (in)
26.81
SellingPoint03
21.2-degree (2.3l Ecoboost) / 15.8-degree (2.7l Ecoboost) Reduction In Outlet Temperature Over Stock Intercooler
TechSpec Centerline Radius
N/a
TechSpec Chassis Codes
N/a
TechSpec Pipe Length
N/a
SellingPoint08
Optimized Core Design For Maximum Cooling Efficiency With Minimal Pressure Drop
SellingPoint09
Bar-and-plate Core For Superior Durability And Performance
TechSpec Core Type
Bar-and-plate
TechSpec Core Height (in)
7.62
TechSpec Maximum Recommended Boost Pressure (PSI)
N/a
TechSpec Core Thickness (in)
4.72
TechSpec Pipe Diameter
N/a
SellingPoint10
Cast Aluminum End Tanks Are Precision Tig Welded To The Core For Increased Pressure Tolerance And Reliability
TechSpec Note
Does Not Fit Raptor Bronco With 3.0l Ecoboost
TechSpec Installation Notes
N/a
SellingPoint15
Mishimoto Lifetime Warranty
Install Difficulty
3
SellingPoint11
Cnc-machined 6061 Aluminum Inlet And Outlet Flanges
SellingPoint12
Does Not Interfere With Adaptive Cruise Control Or 360 Cameras
TechSpec Engine Codes
2.3l Ecoboost--2.7l Ecoboost
SellingPoint13
Available In Stealth Black Or Sleek Silver Powdercoat
SellingPoint14
- Mishimoto Lifetime Warranty
- U.s. Patent #d1,042,547 S
TechSpec Core Length (in)
19.49
TechSpec Overall Height (in)
8.62
TechSpec Applications
Ford Bronco I4 2.3l 2021+--ford Bronco V6 2.7l 2021+
TechSpec Includes
(1) Mishimoto Performance Intercooler--(2) Intercooler Pipe Adapters--mounting Hardware--mishimoto Lifetime Warranty
TechSpec Weight (lbs)
N/a
TechSpec Inlet (in)
2.48
TechSpec Overall Width (in)
6.77
TechSpec Outlet (in)
2.48
Packaging
bar code
840197711446
package quantity
1
length
28.50 in
width
8.25 in
height
9.75 in
weight
13.81 lb
Information on technical characteristics, the delivery set, the country of manufacture and the appearance
of the goods is for reference only and is based on the latest information available at the time of publication.
Related Products
Loading...