Side Mount Sgl Lid Dia Tread Bright Pol 16 Gauge Alum 72x11.25x11
Do not over-tighten: Under normal install, the J-Bolt will contact the bottom edge of the plastic bed rail cap. If the bolt is over-tightened, the plastic could deform and the bolt will then contact the aluminum bed rail flange. If over tightening continues, the paint on the aluminum flange could be damaged. This is when galvanic corrosion would start to become an issue.
Side Mount Single Lid With Struts Diamond Tread Bright Polished 16 Gauge Aluminum 72 Inch Length x 11-1/4 Inch Width x 11 Inch Height 4.4 Cubic Foot Capacity
Tool Box
General
Height (Bed Rail Down)
Not Applicable
Surface Design
Diamond Tread
Width (Bed Width)
Not Applicable
Number Of Lids/Storage Box Doors
1 Lid
Volume (CU FT)
4.4 Cubic Feet
Material
16 Gauge Aluminum
Information on technical characteristics, the delivery set, the country of manufacture and the appearance
of the goods is for reference only and is based on the latest information available at the time of publication.