2021 GMC Canyon Bumper Guard - Front Westin

Great Look, Easy Install. Item as described. Would definitely buy again for a different work truck!

This bull bar by Westin looks awesome on my 2002 Pathfinder. There are others I considered, some for more or less money, but Westin showed the most promise in value. The black powder coating is very durable but even when it gets chipped (it's bound to happen) the stainless steel tube construction will not rust and make the chipped coating worse over time. The added covers over the cross bar welds highlights the craftsmanship that Westin put into this product. The covers are not necessary but they do set this product apart from the generic look of the others I had considered. The brushed grain stainless steel skid plate is a nice accent to the product as well. Nicely done Westin.

Looks awesome! Fits great and works whether you have 2wd or 4wd. Tow hooks or not. Looks perfect and super tough. Love it! Definitely a must have and the cheapest here on AutoPartsWAY.

Looks great on my 05 tundra

Aligned and bolted in minutes after removing the tow hooks. Did not have to remove the skid plate on a 2007 Titan contrary to what the instructions stated.

Super fast shipping and very nice product!

Exactly what I wanted! Perfect looks great on my truck!

Fits perfect on my 2004 Chevy z71. Looks great great size not to small or big. Easy to install. Only if you have a little bit of mechanical back ground. Took me about twenty minutes to install. The only thing I found wrong was one of the bolts was cross threaded. So I just welded around the hardware to the trucks main frame. Now it's just like a Chevy. Solid as a rock. To save time I went ahead and purchased the tag accessory. Installed it before I attacthed the bull bar.

Received the bull bar quickly despite a major ice storm. Product was not damaged upon arrival and came with everything needed for instillation. Took about 45min to an hour to install. Its helpful if you have someone who can hold the bull bar for you when it comes time to mount the bull bar on the brackets provided. Piece of advise for future buyers: Don't tighten any bolts/nuts until you have everything attached. Makes it much easier to level the bull bar. I'm glad I spent the extra money on this bull bar. I would recommend this one to everybody.

Great quality! Westin never disappoints!

I am impressed with this aftermarket product. It is well designed and built. It fits perfectly in my Escalade. The assembly instructions were decent.

Received as advertised in a timely fashion

Great product so far. Just installed it a week ago on a 2008 mercury mariner. It mounts on the crossbeam in front of the radiator. Its tight but could be done in 2 to 3 hours easy. I also bought a 24" off-road LED lightbar. It fit perfectly inside of the bully bar. Had to drill a couple of holes and make a trip to the local hardware store to get a couple of longer bolts to mount the lightbar. Love it, pretty sturdy, not gonna stop much though realistically. hope it doesn't rust.

Fit perfectly took about 20 min to install

Wow, forgot that I ordered this push bar from AutoPartsWAY... It has exceeded my expectations so far. Very nice quality & workmanship!

Looks great. Arrived quickly

Bar looks great lower review due to bad instructions had to wing it. Overall good product.

Excellent service from all. Thank you.

Just had the 'Bull Bar' installed by my Jeep dealer on my 2015 Jeep Grand Cherokee Limited. Took only 20 minutes to install with the included mounting kit (brackets & bolts) and I've already received several compliments. Looks great and I love it!

Work and look great

Correct fit, easy to install and looks great!

We got this as a gift for my little brother, he put it on his Ford Ranger. It fit great and looked really nice too. A few months after having it on his truck my brother was in an accident that totalled his truck. It was a white out (VT winter), he couldn't see anything and ended up sliding off the road, rolling the truck. The bull bar was dented but it may have saved my brother because it took the biggest hit, and may have prevented his front end from pushing into the truck and crushing him. My brother walked away with a few minor bumps and bruises, but looking at his truck you wouldn't think he would have been so lucky. I can't say for sure it was the bull bar, but definitely would buy it again.

Awesome product at an awesome price!

I bought this for my 98 Ram. Install was easy, instructions clearly written and all brackets and bolts included. It did however start to rust around the 'WESTIN' cutout, but thats nothing i wouldnt expext on exposed steel in northern Ohio!

This Bull Bar makes a BIG difference!!!

1 person install. Took about 1 hour total. Fits good, looks even better.

THE FASTEST AND MOST ACCURATE shipping I've ever seen, and I do my fair share of online ordering!!Looks great on my 05 Tundra!!(THIS IS THE BLACK AND POLISHED BULL BAR!!)

Awesome product. Should tell you that the grill has to come off to install and no need to remove the factory plate mounting back.

Nice product....installation was easy to do and looks great on my red F-150....I chose the black finish to add some character

Easy install and looks great on my Tacoma 4x4! I added lights and I'm stoked about the final outcome. I would recommend this product to any Tacoma owner.

This Weston bar is made using high quality metal,and high quality welds and is HEAVY! I can't wait to get it on. I have seen several that are knock offs and this thing makes them look like they are made from recycled beer cans!

Tons of mixed information online about the fit for this Westin 32-2250 and the 2014 Tundra.I called Westin directly. They stated it would indeed fit the 2014 Tundra. I thought that was good enough authority.My bull bar arrived in great condition in Westin labeled packaging (big box).Installation was quite simple. My brother and I were able to install in about 30 minutes.The nuts and bolts portion of the install in easy. I spent most of the time making slight adjustments to get the perfect center and height. Overall, it looks great on my 2014 Tundra.

Decided to go with a brand name. Chrome finish and over-all construction of bar not up to spec on the off-brands. Took about 1 1/2hrs. to install by myself. Added some extra tow hooks and longer bolts on bottom of bar where it bolts on to truck so I could still pull with front of truck. Installation of bar requires removal of stock tow hooks. Bar has been on my truck for 3 weeks now. Looks great, no issues, still nice and tight. Very satisfied.

Easy install, great look. Bought at a great price. Loved the product, high quality. Would not expect it to protect the truck in any way but sure does make it look nicer.

Awesome product! Really makes the Durango look a little meaner. I did not install it myself, but the shop that did install it did it in less than 15 minutes. I recommend this product and the seller as well.

Looks great, by far the cheapest price I found on this. The only draw back was the box arrived looking like hell, but no damage was done to the bar. Easy to install, and arrived quick with a prime membership.

Installed this on my daughters 2004 GMC Sierra 2500 HD. Install was very easy and all bolts were supplied. To connect the bar to the frame they supply a square washer for one bolt and a round washer for the other. The bolt holes are too close together to use the supplied round washer, so I had to get a smaller washer (not a major issue).Looks great on the truck and she has received numerous compliments.

Great product and fit so well. No problems and looks great on the truck. Great packing too. One, two, three, now got the words in.

This Bull Bar looks great on my 2012 Jeep Grand Cherokee. It gives it distinction from other Grand Cherokees on the road. The install was fairly easy despite the so-so directions.

Gives a new look to my Nissan Xterra easy installation as well and good quality product at the right price

Excellent product, just as described and very easy to install, it took me no more than 1 hour. Looks great on my truck.

Exact fit for my 2013 Nissan Titan! Looks great and was ~$60 cheaper than the other sites I researched! Definitely worth it!

I love it glad I spent the extra money after all I want it to make the truck to stand out and it does took about an hour to install fits great no drilling

Mounted easy. Looks good. Unfortunately, no option to get the bolt on plate in powder coat black, same color as tubes. The chromed plate started developing rust within the "Westin" logo after 3 months. I'm removing the plate. Hopefully, I'll be able to get a black one later. Overall satified.

I upgraded to a Stainless Steel bar after my black powder coated one rusted off. It looks great. One hint. You can reuse the original mounting brackets so be careful when taking off the old bar. It will save you alot of time. Just unbolt the old one and bolt on the new one.

Bought this for a 2004 F-150 Heritage. It installed without any problems, took about 1.5 hours by myself to install. The instructions are confusing until you start to put it together and then you can figure out which piece goes where.The mounting plates don't sit flush under the frame but the bar still fit without any problems. I had to buy the with the bar, otherwise my license plate would be half covered by the middle bar and skid plate.It looks like you can fit 2 6" fog/driving lights on the bar. There two pre-drilled holes for mounting the lights.A word of caution though, the mounting plates for the bar go where the tow hooks are so you'll need to remove your tow hooks or cut your front air dam to mount the bar if you don't have tow hooks.

I purchased the Grill Guard to protect the front of my 2009 Honda Ridgeline.It looks great.I can't say how hard it is to install because I took it to a friend that owns a body shop to be installed.It must have been easy, because he did not charge me. He usually does.With the amount of savings on the Grill Guard, I felt I could afford to have it installed.Now I'm not so worried about bumping those parking lot handicap signs when parking.

I put this item on my 2009 Titan, this thing is big, and nice, made a wonderful addition to my truck.

Well made product, time will tell as to durabilty. Only problem was wiring harness for Westin lights, purchased at the same time, to relay is to short. Would like to have placed it higher in engine compartment.

Great product overall, good price compared to many other sites. Installation a bit challenge for my Tacoma, I've done it entirely by myself.

I brought this as a gift for my bf.. He showed me the place he wanted it from and it would have costed me an extra $200. So i searched on it AutoPartsWAY and they had it.

Yeah, sure, it's light weight and virtually non-function. But like chrome on a Harley, this accessory enhances the look of your ride. I put it on a black 2010 Sequoia which in my opinion did not have enough factory (OEM) installed chrome on the front. I have had numerous comments about how good it looks - all very positive. It was easy to install and the price through AutoPartsWAY was the lowest that I could find anywhere. If you are into the aesthetic aspects of your ride, this is a winner.

This Bull Bar was just as advertised. Simple DIY job if you have a torque wrench and 30 minutes......it sure is purtty!.....

Excellent fit and finish. No problems with install. Best price was on AutoPartsWAY.com especially with free shipping. Would buy again. Didn't need licence plate relocate kit, just placed the plate so the bottom holes instead of the top were used to attatch to bumper-raising the plate.

The Bar fit well and was easy to install. It seems pretty stout as it mounts to the frame. You have to trim the spoiler on new model ranger but it was easy to do. Note> I later purchased a set of Hella 500 Series Driving lights and they were about 1/8 inch too big to fit between the bars. I was able to mash the mounting holes a bit and get them to clear but smaller lights would be a better choice.

Was easy to install and looks great but this item is shipped in the original box which needs to be greatly improved. item was slightly damaged in an inconspicuous area so i decided to just install it as is. But beware the damage could have been much worse,