Image
Product
Price
- Pillar Mount
- Pillar Mount, 2 Gauge, full length, Black for 2011-2016 Ford F250/F350/F450/F550
-
Features:
- Mounts gauge for a clean, finished look
- Easy installation, no damaging or modifying the interior. Mounts on A-pillar allowing wires and tubes to be cleanly routed for a finished look. Can be painted to match your interior. A clean, finished look! Banks pillar gauge pods provide a clean, finished look to your vehicle's interior. Mounts on A-pillar allowing wires and tubes to be cleanly routed for a finished look. Full-pillar cover for seamless, built-in appearance. Gauges sold separately. Black textured finish, can be painted to match your interior. Key Features: Location and design allows for optimal gauge viewing, A clean, finished look!, Easy installation, no damaging or modifying the interior, Gauges sold separately, or included with some Banks power systems, Allows wires and tubes to be cleanly routed for finished look, 2-Gauge pillar mount, Gauge Size: 2-1/16 inch (52mm) diameter, Color: Black
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2014 - Ford F-350 | V | 6200 | GAS | 8 Cyl 6.2L | 378 |
- GAUGE MOUNT; STEERING COLUMN; DUAL; 2 1/16in.; VW GOLF/JETTA 99-06
- 2-1/16 in.
- STEERING COLUMN; DUAL; 2-1/16in.; VW GOLF/JETTA 99-05
- Mounting Solutions Steering Column Dual Pod
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
- Number of Pods: 2
-
Features:
- Provide Excellent Viewing For Safe Driving
- Custom Designed For Best Fit And Finish
- For Use w/2-1/16 in Auto Meter Gauges
- Paint To Match
- Includes Required Mounting Hardware
- AutoMeter steering column gauge mounts (pod) are covers that install over the top of your vehicles factory steering column shroud, providing a clean and convenient location to install an additional 2 1/16 in. gauge or two in the drivers field of vision. These products are vehicle-specific fitment to ensure proper fit and finish and are molded from durable ABS composite material with a black textured finish which can be painted to match your interior trim if desired.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Volkswagen Golf |
- GAUGE MOUNT; STEERING COLUMN; SINGLE; 2 1/16in.; DODGE RAM 10-19
- 2-1/16 in.
- STEERING COLUMN; SINGLE; 2 1/16in.; DODGE RAM 10+
- Mounting Solutions Steering Column Single Pod
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
- Number of Pods: 1
-
Features:
- Clean OEM Like Fit And Finish Gauges Do Not Obstruct The Drivers
- View Of The Road And Are Positioned At Optimum
- Viewing Angles For At A Glance Readings
- For Use w/2-1/16 in Auto Meter Gauges
- Paint To Match
- Includes Required Mounting Hardware
- AutoMeter steering column gauge mounts (pod) are covers that install over the top of your vehicles factory steering column shroud, providing a clean and convenient location to install an additional 2 1/16 in. gauge or two in the drivers field of vision. These products are vehicle-specific fitment to ensure proper fit and finish and are molded from durable ABS composite material with a black textured finish which can be painted to match your interior trim if desired.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ram 2500 |
- Comes w/CTS/CTS2 Adaptors
- Chevy/GM Dash Pod; Comes w/CTS/CTS2 Adaptors;
- Chevy/GM Dash Pod
- Product Attributes:
- WARNING CA Proposition 65: No
- Number of Pods: 1
-
Features:
- Compatible w/CS2/CTS2
- Vacuum Formed Edges
- Durable High Quality Plastic
- Dash pods offer a unique solution for juice with attitude, evolution or insight customers looking to add that finished, factory look to their truck. CTS products will need a CTS adaptor kit. Pods may need to be painted to match the color of your interior.
Additional Fitment Information:
| Vehicle |
|---|
| 2001 - Chevrolet Silverado 2500 |
- Comes w/CTS/CTS2 Adaptors
- Basic Interior Dash Pod; Comes w/CTS/CTS2 Adaptors;
- Basic Interior Dash Pod
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Number of Pods: 1
-
Features:
- Compatible w/CS2/CTS2
- Vacuum Formed Edges
- Durable High Quality Plastic
- Dash pods offer a unique solution for juice with attitude, evolution or insight customers looking to add that finished, factory look to their truck. CTS products will need a CTS adaptor kit. Pods may need to be painted to match the color of your interior.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Chevrolet Silverado 3500 HD |
- Cast Aluminum; Works w/CTS3 And CS2/CTS2; Includes Hardware
- Pillar Mount; Cast Aluminum; Works w/CTS3 And CS2/CTS2; Includes Hardware;
- Pillar Mount
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Cast Aluminum For Rigidity And Solid Mounting
- Custom Molded For Vehicle Specific Fit
- Matte Black Coating For Sleek Clean Look
- Paintable Finish For Complete End User Customization
- No Drilling Required
- Locates Monitor For Optimum Viewing
- Hardware And Dual T-Slot Mount Included
- Works w/CTS3/CS2/CTS2 Devices
- We are happy to announce all-new cast aluminum display mounts available for order now to offer a more permanent and vehicle specific mount for our CTS3 based devices. These mounts have been specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. Molded and cast from aluminum, the display mounts offer a sturdy mounting location to replace our standard suction cup style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior. No drilling required, with a simple one bolt installation using the factory A-pillar grab handle location. These mounts use a universal uni-ball style mount, allowing them to be used with the included dual T-slot mount or with various aftermarket cell phone and GPS mounts. All hardware and required pillar cover plates are included. Checkout these unique CTS3 display mounts today!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Ram 2500 | V | - | 8 Cyl 5.7L | SLT | 345 |
- Comes w/CTS/CTS2 Adaptors
- Ford Dash Pod; Comes w/CTS/CTS2 Adaptors;
- Ford Dash Pod
- Product Attributes:
- WARNING CA Proposition 65: No
- Number of Pods: 1
-
Features:
- Compatible w/CS2/CTS2
- Vacuum Formed Edges
- Durable High Quality Plastic
- Dash pods offer a unique solution for juice with attitude, evolution or insight customers looking to add that finished, factory look to their truck. CTS products will need a CTS adaptor kit. Pods may need to be painted to match the color of your interior.
Additional Fitment Information:
| Vehicle |
|---|
| 2007 - Ford F-350 Super Duty |
- For Use w/CTS3; Aluminum
- Pillar Mount; For Use w/CTS3; Aluminum;
- Pillar Mount
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Cast Aluminum For Rigidity And Solid Mounting
- Paintable Finish For Complete End User Customization
- No Drilling Required
- Locates Monitor For Optimum Viewing
- We are happy to announce all-new cast aluminum display mounts available for order now to offer a more permanent and vehicle-specific mount for our CTS3 based devices. These mounts have been specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. Molded and cast from aluminum, the display mounts offer a sturdy mounting location to replace our standard suction cup-style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and are paintable for a customizable look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Ford F-250 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- Cast Aluminum; Works w/CTS3 And CS2/CTS2; Includes Hardware
- Pillar Mount; Cast Aluminum; Works w/CTS3 And CS2/CTS2; Includes Hardware;
- Pillar Mount
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Cast Aluminum For Rigidity And Solid Mounting
- Custom Molded For Vehicle Specific Fit
- Matte Black Coating For Sleek Clean Look
- Paintable Finish For Complete End User Customization
- No Drilling Required
- Locates Monitor For Optimum Viewing
- Hardware And Dual T-Slot Mount Included
- Works w/CTS3/CS2/CTS2 Devices
- We are happy to announce all-new cast aluminum display mounts available for order now to offer a more permanent and vehicle specific mount for our CTS3 based devices. These mounts have been specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. Molded and cast from aluminum, the display mounts offer a sturdy mounting location to replace our standard suction cup style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior. No drilling required, with a simple one bolt installation using the factory A-pillar grab handle location. These mounts use a universal uni-ball style mount, allowing them to be used with the included dual T-slot mount or with various aftermarket cell phone and GPS mounts. All hardware and required pillar cover plates are included. Checkout these unique CTS3 display mounts today!
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Ford F-250 Super Duty |
- Cast Aluminum; Works w/CTS3 And CS2/CTS2; Includes Hardware
- Pillar Mount; Cast Aluminum; Works w/CTS3 And CS2/CTS2; Includes Hardware;
- Pillar Mount
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Cast Aluminum For Rigidity And Solid Mounting
- Custom Molded For Vehicle Specific Fit
- Matte Black Coating For Sleek Clean Look
- Paintable Finish For Complete End User Customization
- No Drilling Required
- Locates Monitor For Optimum Viewing
- Hardware And Dual T-Slot Mount Included
- Works w/CTS3/CS2/CTS2 Devices
- We are happy to announce all-new cast aluminum display mounts available for order now to offer a more permanent and vehicle specific mount for our CTS3 based devices. These mounts have been specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. Molded and cast from aluminum, the display mounts offer a sturdy mounting location to replace our standard suction cup style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior. No drilling required, with a simple one bolt installation using the factory A-pillar grab handle location. These mounts use a universal uni-ball style mount, allowing them to be used with the included dual T-slot mount or with various aftermarket cell phone and GPS mounts. All hardware and required pillar cover plates are included. Checkout these unique CTS3 display mounts today!
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Ram 2500 |
Showing 1 - 10 of 28 products
Loading...