Sound Dampening Sheet Body Parts
Image
Product
Price
- The Suppressor Sound Dampening Control
- The Suppressor Sound Dampening Control; 36 in. x 60 in.;
- Product Attributes:
- Overall Length: 60.000 In.
- Width: 36.000 In. (3 Ft.)
-
Features:
- Use Sound And Radiant Heat Control
- Perfect For Firewalls
- Floorboards And Doors
- The Suppressor is ideal when both sound and radiant heat control is needed. In addition to the polyethylene film, the foil surface provides direct protection from radiant heat.Great for areas like floorboards, and doors. The Suppressor is also 70 mil in thickness, contains a high temperature adhesive backing, and is easy to trim and fit. Not recommended to hang upside down.The Suppressor will reduce various road noises, engine noises and improve driver comfort and concentration.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- The Suppressor Sound Dampening Control
- The Suppressor Sound Dampening Control; 36 in. x 24 in.;
- Product Attributes:
- Overall Length: 24.000 In.
- Width: 36.000 In. (3 Ft.)
-
Features:
- Use Sound And Radiant Heat Control
- Perfect For Firewalls
- Floorboards And Doors
- The Suppressor is ideal when both sound and radiant heat control is needed. In addition to the polyethylene film, the foil surface provides direct protection from radiant heat.Great for areas like floorboards, and doors. The Suppressor is also 70 mil in thickness, contains a high temperature adhesive backing, and is easy to trim and fit. Not recommended to hang upside down.The Suppressor will reduce various road noises, engine noises and improve driver comfort and concentration.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Cool It™ Insulating Mat
- Cool It™ Insulating Mat; 24 in. x 48 in.;
- Product Attributes:
- Overall Length: 48.000 In.
- Width: 24.000 In. (2 Ft.)
-
Features:
- Great For Heat Protection
- Great For Noise Reduction
- Use In Doors And Under Hoods
- Acts As Sound Insulator
- Use the Cool-It Mat to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. It is also perfect in doors, under hoods, and above transmission housings.The Cool-It Mat is composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly-reflective mylar reflects heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection.The silica blanketing is a duel-density composite and is the main sound insulator. It is easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Floor And Tunnel Shield™
- Floor And Tunnel Shield™; 42 in. x 4 ft. [14.0 sq. ft.];
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Width: 48.000 In. (4 Ft.)
-
Features:
- Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
- Blocks Radiant Heat From Entering Driver Compartment
- Withstands Direct High Temperatures Up To 1750 Degrees
- Serves As A Barrier To Unwanted Road/Tire And Engine Noise
- Constructed From 10 Mil Aluminum
- Easy To Form To Shapes And Contours
- Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
- Adheres To Almost Any Surface/Material/Fiberglass
- Minimum Clearance Required Only 3/16 in. Thick
- Just Trim Peel And Stick
- Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Floor And Tunnel Shield™
- Floor And Tunnel Shield™; 21 in. x 4 ft. [7.0 sq. ft.];
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Width: 48.000 In. (4 Ft.)
-
Features:
- Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
- Blocks Radiant Heat From Entering Driver Compartment
- Withstands Direct High Temperatures Up To 1750 Degrees
- Serves As A Barrier To Unwanted Road/Tire And Engine Noise
- Constructed From 10 Mil Aluminum
- Easy To Form To Shapes And Contours
- Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
- Adheres To Almost Any Surface/Material/Fiberglass
- Minimum Clearance Required Only 3/16 in. Thick
- Just Trim Peel And Stick
- Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Floor And Tunnel Shield™
- Floor And Tunnel Shield™; 21 in. x 2 ft. [3.5 sq. ft.];
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Overall Length: N/a
- Width: 24.000 In. (2 Ft.)
-
Features:
- Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
- Blocks Radiant Heat From Entering Driver Compartment
- Withstands Direct High Temperatures Up To 1750 Degrees
- Serves As A Barrier To Unwanted Road/Tire And Engine Noise
- Constructed From 10 Mil Aluminum
- Easy To Form To Shapes And Contours
- Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
- Adheres To Almost Any Surface/Material/Fiberglass
- Minimum Clearance Required Only 3/16 in. Thick
- Just Trim Peel And Stick
- Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Damping Material
- Damping Material; 12 in. x 12 1/2 in.; 8.3 sq. ft.; 8 Sheets;
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Overall Length: 12.000 In.
- Width: 12.500 In.
-
Features:
- High Performance Adhesive Lasts Throughout Temperature Extremes
- Eliminates Low Frequency Noise Problems
- Easily Trimmed To Size With Boom Mat Blade Lock Knife
- Non-Hazardous Material
- Flexible - Can Be Applied To Irregular Surfaces
- User Friendly Peal And Stick Installation
- Multiple Uses Including Automotive/Industrial Applications
- Durable Weatherproof Construction Is Also Corrosion Resistant
- Flammability Rated
- The Industry Standard In Vibrational Damping Technology
- Boom Mat Damping Material solves the problem of noise, vibrations, squeaks and rattles that come from roads, stereos, engines & more. Boom Mat Vibration Damping Material is a premium quality damping material providing extreme noise damping for the most demanding commercial and sound competition applications. Interior panels vibrate and generate noise. Boom Mat stops that noise by trapping it between our thick, 4 mil aluminum stiffening top skin and the asphalt free, pure butyl, noise constraining layer. Plus worry-free no snag adhesion to any interior surface, vertical or overhead, even in the most demanding of temperature extremes. Those quality components are what makes Boom Mat Vibration Damping Material require only 25-50% coverage to get the job done. This saves weight, material cost and installation time. Easy peel plastic release liner (not a paper backing that tears) Enhances stereo performance and sound Gives you a quiet and comfortable interior Minimal prep & install time Performs in extreme temperatures Use as a first layer to control noise and dampen vibrations 8 (eight) 12.5in x 24in sheets (16 sq. ft.) 2mm thick
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Damping Material
- Damping Material; 12 1/2 in. x 24 in.; 20.8 sq. ft.; 10 Sheets;
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Overall Length: 12.500 In.
- Width: 24.000 In. (2 Ft.)
-
Features:
- High Performance Adhesive Lasts Throughout Temperature Extremes
- Eliminates Low Frequency Noise Problems
- Easily Trimmed To Size With Boom Mat Blade Lock Knife
- Non-Hazardous Material
- Flexible - Can Be Applied To Irregular Surfaces
- User Friendly Peal And Stick Installation
- Multiple Uses Including Automotive/Industrial Applications
- Durable Weatherproof Construction Is Also Corrosion Resistant
- Flammability Rated
- The Industry Standard In Vibrational Damping Technology
- Boom Mat Damping Material solves the problem of noise, vibrations, squeaks and rattles that come from roads, stereos, engines & more. Boom Mat Vibration Damping Material is a premium quality damping material providing extreme noise damping for the most demanding commercial and sound competition applications. Interior panels vibrate and generate noise. Boom Mat stops that noise by trapping it between our thick, 4 mil aluminum stiffening top skin and the asphalt free, pure butyl, noise constraining layer. Plus worry-free no snag adhesion to any interior surface, vertical or overhead, even in the most demanding of temperature extremes. Those quality components are what makes Boom Mat Vibration Damping Material require only 25-50% coverage to get the job done. This saves weight, material cost and installation time. Easy peel plastic release liner (not a paper backing that tears) Enhances stereo performance and sound Gives you a quiet and comfortable interior Minimal prep & install time Performs in extreme temperatures Use as a first layer to control noise and dampen vibrations 10 (ten) 12.5in x 24in sheets (20 sq. ft.) 2mm thick
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Floor And Tunnel Shield II™
- Floor And Tunnel Shield II™; 10 in. x 10 in.; .83 sq. ft.;
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Overall Length: 10.000 In.
- Width: 10.000 In.
-
Features:
- Ideal For Firewalls/Under Vehicle/Floor Pans/Oil Tank Box/etc.
- Blocks Radiant Heat From Entering Driver Compartment
- Withstands Direct High Temperatures Up To 1750Degrees
- Serves As A Barrier To Unwanted Road/Tire And Engine Noise
- Constructed From 10 Mil Aluminum
- Easy To Form To Shapes And Contours
- Aggressive Self-Adhesive Backing Holds Past 450 Degrees F
- Adheres To Almost Any Surface/Material/Fiberglass
- Minimum Clearance Required Only 3/16 in. Thick
- Just Trim Peel And Stick
- 10 in x 10 in / 0.83 sq ft
- Floor & Tunnel Shield II(TM) solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor annd Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 in. composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750F. The adhesive side holds past 450F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16 in. thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a do-it-once install Extreme heat barrier - aluminum side should face the heat Only 3/16 in. thick Use as barrier to reflect and insulate from any heat source Great for exterior applications DO NOT apply directly to exhaust components.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- 5th Wheel Rail Sound Dampening Pads
- CURT 16900 5th Wheel Rail Sound Dampening Pads; 4-Pack
- Product Attributes:
- WARNING CA Proposition 65: No
- Overall Length: 12.000 In.
- Width: 1.750 In.
-
Features:
- Designed To Be Placed Between A 5Th Wheel Hitch And Base Rails
- Helps Eliminate Clanking And Rattling Common In 5Th Wheel Towing
- Compatible w/Curt 5Th Wheel Legs Except Rollers And Base Rails
- Constructed From Tough Neoprene Rubber
- The grand lifestyle that goes hand in hand with 5th wheel towing is made perfect in the details. You can talk all you want about whose RV hogs the most road or whose 5th wheel hitch can handle the most tonnage, but when you get down to it, the best hitch and trailer setup in the world can never reach its full potential without the right accessories to back it up. CURT 5th wheel rail sound dampeners are made to fit between a 5th wheel hitch and its mounting rails. These neoprene pads are made to eliminate the clanking and rattling noises common while driving with a 5th wheel hitch. Each pack includes four sound-dampening pads.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Showing 1 - 10 of 12 products
Loading...