1996 Toyota Avalon Disc Brake Rotor - Rear EBC Brakes

  • Features:
    • Ultimax OE Style Disc Kit
  • EBC Ultimax Slotted Rotors offer you the performance of slotted rotors but without the air noise that is normally associated with slotted rotors. The progressively angled slots on the EBC Ultimax Slotted Brake Rotors offer quiet brake operation without that excessive air noise, while still allowing the slots to help keep your brakes cool. The angled slots pull in cool air for cooler brake operation which helps your brakes perform at their best. The slots also help to clear any excess dust and debris to help keep pad grip to a maximum while also increasing pad longevity.
  • Sold Each. Purchase quantity 1 for 1 wheel

Additional Fitment Information:
Vehicle Position
1996 Toyota Avalon Rear
1 In Stock
Best Price:

$167.09 USD
$200.51 USD
Brand EBC Brakes
Part # E35RK7244
Condition New
Warehouse B

EBC Brakes

  • For FMSI Pad No. D672; Solid; 5 Bolt Holes; 291mm Dia.; 65mm Height; 9mm Thick; 62mm Center Hole Dia.
  • Ultimax OE Style Disc Kit; Rear; For FMSI Pad No. D672; Solid; 5 Bolt Holes; 291mm Dia.; 65mm Height; 9mm Thick; 62mm Center Hole Dia.;
  • Ultimax OE Style Disc Kit
  • With a worldwide work force of over 400 people EBC Brakes is an independently owned and managed leader in the brake market, proud of its customers, its products, its success and its people. EBC Brakes produce the largest range of brake pads and brake discs in the world with over 5000 part numbers for every type of moving vehicle. EBC Brakes are made in one of its two specialist factories in the UK and USA. The majority of EBC brake discs or brake rotors are also made in the UK.

    With modern trends towards cheap imported brake pads and brake rotors EBC Brakes leads the world in its technology, quality control, product performance and customer service.

    Our product range includes brake pads for cars, trucks and SUV, brake rotors (brake discs) for every rolling vehicle on the planet and even brake pads for wind farms, brake pads for military applications such as the Humvee, various armored cars and even tanks, railway brakes products and all kinds of industrial vehicle brakes.

    General

    WARNING CA Proposition 65
    No
    Style
    Oe

    Packaging

    package quantity
    1
    weight
    20.54 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
    1. Andromeda
      05 May, 2015
      After replacing disks on my Passat and having them warp with oem VAG units, I ordered these disks with EBC green pads. No more warpage and the pads are great too.
    2. Anderson Ospino
      27 Apr, 2015
      exelente condicion
    3. Joseph P Purpura
      23 Apr, 2015
      Much better than OEM.
    4. Tablet1
      10 Apr, 2015
      Fantastic rotors for my 2004 Dodge Dakota
    5. Daniel Attila "Daniel Attila"
      06 Apr, 2015
      Among the rotors that fit my car, this is the best, and the slotted version is even better than the smooth one. You can't go wrong with EBC.
    6. Adam
      29 Mar, 2015
      I got these rotors at an AMAZING price on clearance, so I cant really complain. They are actually great, but do have the common wind noise associated with slotted rotors. If you dont mind that, these are right up your alley.
    7. jl_buyer
      05 Mar, 2015
      Best replacement rotors out there, high quality carbon content, resistant to warpage and high quality manufacturing
    8. jl_buyer
      05 Mar, 2015
      Top quality rotors, high carbon material, resistant to warpage and quality manufacturing
    9. M
      02 Mar, 2015
      I replaced the front rotors on my Fiat Spider with these. The install was easy enough and they were a perfect fit for the odd 4x98mm studs the Fiat uses. The packaging was sturdy but easy to open. The rotors were very straight with no perceptible runout.The grooves and dimples don't seem to help in regular driving at least at first, but I seem to have slightly less brake fade than before (I also paired these with a new set of Wagner Ceramic Brakepads).
    10. B -RAD
      23 Feb, 2015
      Seller very willing to work with me on issue. Great brakes
    11. homeschoolmom
      22 Feb, 2015
      Although I've only had these installed for approximately a month and cannot comment on long term quality, they have been perfect so far.
    12. EC
      21 Feb, 2015
      Great product works as expected.
    13. Thomas Stith
      18 Feb, 2015
      These rotors function perfectly on my 2011 Mazdaspeed 3. I paired them with EBC Reds and it has been a huge improvement over the stock pads (which dusted like crazy). The bite with these pads has been similar to the factory pads but with so much less dust. No regrets.
    14. Jorge Espinoza
      17 Feb, 2015
      Big difference in braking awesome quality easy to install. Had a slight difficult time removing the rear rotors from build up rust. Just grab a rubber mallet and bang around all the edges and bammm it should fall right out
    15. R. Miller
      11 Feb, 2015
      grab and hold
    16. B. Chun "Hawaii Guy"
      09 Feb, 2015
      New in box and just as described.
    17. Jon Gialouris
      07 Feb, 2015
      Perfect fit for my 2001 Audi a4. these are for the Rear. Used EBC Brakes DP3680C Redstuff Ceramic Low Dust Brake Pad with these rotors and its awesome! great stopping power and very low brake dust. highly recommend especially for someone who drives a bit fast and does heavy braking.
    18. Yuriy Kovalov
      03 Feb, 2015
      a bit noisy at high speed braking, but thats to be expected from a design like this. but now my car stops on a dime! well worth the money if you dont want to upgrade the brakes to a larger caliper/rotor setup.
    19. Brian Wolf "Brian Wolf"
      01 Feb, 2015
      Have been wworking very well for the past two weeks. I installed the EBC DP41660R Yellow Stuff Brake pads at the same time. Both work excellent together. I had the opportunity to take them out on the Autostrada (Italian Highway) this past weekend with no issues and plenty of stopping power.
    20. Patrick Galvin
      31 Jan, 2015
      Have 1,000 miles in my four new rotors. Easy to install, perfect fit, and brakes are great.
    21. Kathy R.
      23 Jan, 2015
      best writers I've ever purchased by far!
    22. B -RAD
      23 Jan, 2015
      I'm not gonna lie... The look definitely played a role in the decision. I was looking for something unique - not just slotted and not just drilled. So they look great installed.With that behind me... I was not expecting to feel much if any difference between my OEM rotors and the GD's. Couldn't be more wrong. Very noticeable difference in "smoothness" of braking and it honestly makes driving the car a lot more fun.
    23. STP
      17 Jan, 2015
      Installed on 2003 Volvo S60 2.4T, no issues with fit or finish. I have about 4K in miles on these and the brakes feel great.
    24. Ken
      30 Dec, 2014
      look nices not installed yet.
    25. G Franklin
      29 Dec, 2014
      I'm very happy with these slotted rotors. I did a rotor and pad replacement and I can feel a significant difference in my braking.
    26. Jillian Knapp & Gerald Rhodes
      28 Dec, 2014
      I have had these rotors for two months now and they are still true and smooth. Easy install and have given my BMW a much smoother ride especially under braking. Very happy with this purchase.
    27. scott
      26 Dec, 2014
      fast shipping, fit exact, good product so far
    28. Eliot Sluyter
      26 Dec, 2014
      Great rotors, just as good if not better than OEM, priced very well (not much more expensive than the cheapo parts store chinese-made rotors but WAY better)
    29. Zer0
      26 Dec, 2014
      I can't say a single bad thing about these. For the money they've been terrific on my sometimes aggressively always daily-driven STI.
    30. Bryan Dankanich
      24 Dec, 2014
      Great rotors... Stops the car on a dime with green stuff EBC brake pads
    31. Zolee
      12 Dec, 2014
      I had these racing/sport EBC Brake Rotors and it was time to replace them on my Audi. They served me well for 3 years!!I already installed the new set and they are just as great as the previous set was. Highly recommended product.Don't forget: always buy Quality Break Pads with your rotors, otherwise you kill them fast.
    32. THIAGO D.
      04 Dec, 2014
      Great brakes. I replaced my Challenger RT stock warped front disks with a set of these and they are awesome. I highly recommend it.
    33. Shannon G.
      24 Nov, 2014
      Ridiculously low price on a really high quality rotors. Will do perfectly for my big brake swap-out. Just gotta pickup the TT 225 carriers.
    34. Ray II
      14 Nov, 2014
      98 honda accord fit great, easy install
    35. Bobbi Conde
      10 Nov, 2014
      great purchase!
    36. Driverwedge
      03 Nov, 2014
      These are the second set I'm using. The first set was on another car that saw track time. These things are great. I use them with Redstuff pads and couldn't be happier. They wear very well and have zero issues with stopping power.
    37. brandon
      01 Nov, 2014
      Nice loud but nice
    38. Carl Neeley
      21 Oct, 2014
      Direct replacement high quaility. This could be the fix for all you Town & Country owners with the bad brakes that Chrysler put on there vans (mine were so bad in 10k miles I was afraid to put the family van).Pair these rotors with some Power Stop Z16 Ceramic Brake Pads and the sickness is gone. This combo is smooth as silk. YEA THERE NOT CHEAP BUT IF YOU HATE THE DEARSHIP AS MUCH AS I DO!!! These things are made with superior grade cast iron unlike the oem made from recycled junk. Yes I know the brakes are under sized, but this can be over come with high grade materials. Go to a car race at night they will get the brakes so hot it can melt the tire off of the wheel and they don't warp rotors. JUST BRAKE THEM IN LIKE EBC SAYS!!!!!
    39. Cim
      16 Oct, 2014
      Worked great for my boost setup!
    40. Brett Husebye "BRAT!"
      13 Oct, 2014
      Great front rotor for 2012 Chrysler 200 3.6 Liter with 18 inch wheels. Car rides way better now and has great stopping power. Don't forget the 1000 mile break in for the pads so you don't bed the rotor incorrectly. If you feel vibration after 4000 miles with your new rotors you should go get them turned. The rotors don't warp, they just end up bedded incorrectly causing the vibration. The substance the brake pads release is invisible to the naked eye and is not removable with sandpaper, just have the shop do it, it is economical and takes less than an hour to get all 4 turned if they are off the car.
    41. Brett Husebye "BRAT!"
      13 Oct, 2014
      This rotor was confirmed by me through an EBC rep to fit a Chrysler 200 rear rotor with 18 inch wheels. My car is the 3.6 liter v6 289 horse power. The AutoPartsWAY "car tool" for finding parts has the incorrect parts for the rear axle and I don't know if it's been fixed yet. The pads for the rear axle were also incorrect. The car stops great now and I would recommend these and I believe my ride is smoother.
    42. Timothy Redfern
      05 Oct, 2014
      Broke in very quickly with help of yellow Stuff pads. Good solid feel and very little noise.
    43. Francisco Ortiz
      02 Oct, 2014
      Never had any complaints on EBC rotors or pads they just work and last.
    44. David C. Brumgard "redbwms"
      01 Oct, 2014
      Had some trouble with the factory rotors,3000 miles on the EBC brake rotors,no noises,or problems.
    45. lottp
      25 Sep, 2014
      These look cool, but I can't say if the improved stopping power is from these, the pads, or both. Nevertheless, it's noticeable.
    46. Dale Henne
      19 Sep, 2014
      Great rotors goes great with yellow stuff pads
    47. Sparky San Diego
      17 Sep, 2014
      These rotors with the EBC Green 7000 Series Greenstuff Brake Pad have greatly improved my stopping. They have created a firm peddle and less fade on stops. I drive in the mountains a lot and have noticed a better braking distance and much firmer peddle. This is my third set of pads and second set of rotors in 72,000 miles. These are way better than stock.
    48. Bostonian "PDo"
      07 Sep, 2014
      This front ECB rotor is made in the USA. Please note American-made and American brand-name are two different things in the globalized manufacturing world. This product worked smoothly right after the installation. I used it along with Akebono ACT1324 Front Ceramic Brake Pads also made in USA. That is a great combination to me. The marriage of rotors and brake pads from two different well-known brand names produced a great quality. I tested the car after the installation both in town and highway for low and high speeds. It stops very well. I see that they both will last a long while before being replaced again. I made my purchase from the seller "ecustomhitch". The shipping was very good.
    49. Some Human
      28 Aug, 2014
      These are directional (left and right) but shoppers should be advised that the vanes are not high efficiency curved vanes, they're unequal length straight vanes (alternates between a long and a short vane all around the disc) -The casting and machining are both very clean, it's obvious holding these next to my OEM rotors that there's room for greater air volume to pass through these.Performance; I switched to new pads at the same time so there's no completely fair comparison, but I will say that these rotors in combination with Powerstop Z16 work dramatically better than the OEM ceramic pads and rotors which were in very good shape, just not very good at stopping the car with authority - I can control braking all the way up to lock-up (no ABS on this older car) where before it took major effort to slow the car rapidly.I have not had the car on twisty mountain roads or other high-stress situations yet since changing.
    50. Jakaround
      25 Aug, 2014
      You can't beat free shipping with Prime...and to Hawaii at that!! These are great rotors. I was a little worried about extra noise, WRONG. Maybe a hint during initial break in but since that they have been wonderful. Great stopping, color and appearance are holding up well in a tropical environment. Match them up with some EBC red stuff pads and they work fantastic.
    51. ferrarifixer "ferrarifixer"
      09 Aug, 2014
      These are difficult rotors to find. These were affordable and fit perfectly.
    52. kellyb
      19 Jul, 2014
      I've had these on the front of my 2005 Cadillac STS w/Northstar for a week, but MAN, they are SO MUCH BETTER THAN OEM!!!!!!!No 'sizzling', at least not yet, from medium applications. Some slotted rotors can do this, but EBC may have figured out the secret.These, combined with their Redstuff pads are an incredible combo!
    53. EEBrambila
      09 Jul, 2014
      Perfect Fit. So far no rusting.
    54. Tim Simons
      30 Jun, 2014
      Great rotors, for my 4Runner, makes stopping a whole lot better, when using the green stuff brake pads. They are not as noisy as other reviews.
    55. Wistera
      18 Jun, 2014
      Simply awesome. I ordered a set for both the front and the rear of my Dodge 2500 as well as the green stuff pads. My stoping distance is amazing and there is no shimmy when pressing them hard.
    56. B-Rod
      16 Jun, 2014
      I paired these rotors with Hawk HPS pads on my 2006 Mustang (the EBC pads were much more expensive). I drove the combination 80,000 street miles before they both needed to be replaced. This included two seasons of autocross. Black oxide coating kept rust to a minimum.Street braking performance is consistently excellent, even in wet or snowy conditions. Seasoned track instructors were surprised at how effective my brakes were on such a relatively heavy car. Under braking, it sounds like there is a swarm of cicadas around the car, but the crisp yet smooth braking performance is well worth a little noise.At 140,000 miles I replaced all 4 corners with the same brake combination, plus braided stainless lines. Looking forward to another exciting 80,000 miles!
    57. D. Fraser "Doug"
      13 Jun, 2014
      Have used EBC Rotors and Pad's on 3 vehicles now.The first was a Ford Explorer. Explorer's brakes are not very good. Using EBC rotors and green stuff pads significantly improved stopping.My wife drives a Honda CRV. She does not drive hard but 3 sets of front rotors (from a local brake and muffler shop) warped in about 5 months (each time). Finally, I purchased the EBC USR rotors and its been over a year now and they stop with no pulsing (no warping).The current set of EBC rotors is for my 07 GTI. The GTI has a Stage 2+ tune (about 80 hp over stock), coil overs, bigger sway bars. I installed EBC USR rotors, EBC red stuff pads and stainless steel brake lines. Significant improvement over stock. Good initial bite and good resistance to fading. I can not feel and vibration from the slots through the brake peddle.I did considerable research before buying EBC (again). What I find amazing is that you can find posts on forums where...
    58. Greg
      02 Jun, 2014
      Great purchase. I put some black rims on my '10 VW GTI, the stock grey rotors were not cutting it. I replaced them with these slotted, black rotors, makes the job look seamless. Also increased my stopping power, worked great with EBC Green stuff brakes. Minimal squeak after everything seats.
    59. Greg
      02 Jun, 2014
      Great purchase. I put some black rims on my '10 VW GTI, the stock grey rotors were not cutting it. I replaced them with these slotted, black rotors, makes the job look seamless. Also increased my stopping power, worked great with EBC Green stuff brakes. Minimal squeak after everything seats.
    60. Marcel G. Verrando III
      31 May, 2014
      These rotors are compacted graphite iron, I would not suggest them for someone that is not prepared to use the brakes, I have found them to be amazing, they seem to run cooler, and provide incredable stopping power, I am using with Wagner NSX Ceramic pads on a Toyota Tacoma. they are quite smooth and very responsive.The items were delivered early and in perfect condition.
    61. J. Klugiewicz
      07 May, 2014
      I've had these rotors on my ford focus for a few yrs now. They still look like new and work fantastic. I don't even think they have worn at all. They also give a nice performance look. Several people have noticed and commented how nice they look. When it came time for new rotors on my Edge I knew what to buy. Also take note that they come as a pair and must be installed on the correct side. the box will say right and left.
    62. Jamie Rodgers
      21 Apr, 2014
      I picked these up at an amazing deal ($44 for the pair!). EBC is a known quantity for braking componenents. Have functioned perfectly since installation. I checked for lateral run out prior to installation and they are perfectly true. If there were more available at this price I would have stocked up.
    63. Mike W.
      16 Apr, 2014
      Very high quality rear brake rotor and fit on 2000 Toyota Avalon XLS. No problems installing and appear to be machined from very high quality steel. They have only been on the car about three weeks so time will tell.
    64. gix67er "CEO"
      16 Apr, 2014
      I loved these rotters. Good look and with the zinc platting I never have to worry about the rotters getting the rust look!!
    65. Denise L. Burket "party planning fool"
      15 Apr, 2014
      These fit perfectly and and easy install. They have improved my braking ability and with new EBC red pads you can count on these when you have to brake in an emergency situation.
    66. Adil A. S. Alsuhaim
      21 Mar, 2014
      Saab 9-5 comes with different sizes of brake discs. This one GD1071 is designed for the Linear models. However, in 2005, there is a VIN split where some brake discs are solid, and the other ones are vented. Check your vehicle before ordering. This one has a diameter size (11.3 inch) , and even though AutoPartsWAY said it does not fit my vehicle, I ordered it and it fits (mine is a 2005 9-5 Aero)It seems that EBC uses the code 1071 for the rear non-vented 9-5 products. For example they have USR1071 are the same size.If shopping for vented rear discs EBCs, the number is 1336 (size 11.8 inch) http://www.AutoPartsWAY.com/EBC-Brakes-GD1336-Dimpled-Slotted/dp/B001KQ42L6/ref=au_pf_ss_7?ie=UTF8&Make=Saab%7C65&Model=9-5%7C861&Year=2005%7C2005&carId=003&n=15684181&s=automotiveBTW, by disc, I mean rotors.
    67. Rizz
      16 Mar, 2014
      Great looking with the black paint!Paint does wear off where the pad engages.All the other areas of the rotor are essentially rust free because of the paint.Drop shipped directly from EBC.EBC quality rotors, very good sport rotors!
    68. Rizz
      16 Mar, 2014
      Drop shipped directly from EBC.Great Quality Rotors, and perfect fit for my application, 325XI.the black paint looks awesome, take a picture because as soon as you brake, it comes off where the pad touches the surface of the disc, as expected. Everywhere else on the rotor is protected and won't rust because of the paint though. So there is that to look forward to.Will buy again when these wear down!
    69. JohnnieMo
      16 Mar, 2014
      I bought these for my '08 Avalanche and they've been excellent. The stopping power is amazing. I bought these for towing, and although I haven't towed yet, I can already tell they won't be a problem. I also went with the Yellowstuff pads.I also opted to get the Pro Cut brake skim procedure done as recommended by EBC. However the local shop destroyed the rotors. EBC stepped up and replaced them for free. You can't beat that.
    70. Daniel Abernathy "Fair Consumer"
      12 Mar, 2014
      Replaced the front with these on my GX470. Added the Green Stuff pads and the front brakes are finally working like they should. Only took 6 years. Thank you EBC.
    71. Techan
      06 Mar, 2014
      Fits prefect in my 2008 SUBARU WRX sedan. Comes with L&R in the box.At 110k miles. I designed to replaced the oem rotor front & rear. I paired this with hawk HPS pads. Today is my day 1. I am very happy with them. There are very little low frequency noise when braking really hard at bed in. Maybe just the tires being pressured harder on the road surface.I also had EBC red stuff pads previously with stock rotor. They were better than wrx oem. But wear out little faster than oem(maybe 20% shorter). Could be my driving habit has changed due to better stopping power. I tended to delay and harder my braking and when entering curves.
    72. Travis Beers
      24 Feb, 2014
      I've been riding these for about a year now, and have put 20,000 miles on them. I have them combined w/ StopTech performance rear pads. Good combination, very very quiet.Please note the black coating seen in the pictures is just a paint like ecoat that is gone after your first trip around the block (wherever the brake pad touches).But it is nice that the hub and rest of the surface remains coated, to help prevent surface rust and keep these looking nice.With how they are holding up currently, I see these lasting the life of my car.
    73. NAUIdvr1
      24 Feb, 2014
      I installed these on the rear of my Dodge RAM SRW 3500 Truck and noticed the better stopping power IMMEDIATELY! after driving around with these for over a week, I liked these so much that I joined AutoPartsWAY Prime (to save on the shipping) and ordered a set for the front of my truck.
    74. scififan
      22 Feb, 2014
      Well, I didn't want to down grade them so I gave them 5 stars, they work just fine but I'm not sure if they work better than any of the others. But I do believe the combination of these type rotors and performance brake pads give you more stopping power with less fade.
    75. Benjamin Kirkpatrick
      15 Feb, 2014
      I installed these on my 2003 Volkswagen Beetle GLX and they have been wonderful. The black zinc coating makes them look really nice and although the coating will wear off where the braking actually occurs, the non-contact areas will continue to look clean and free of rust for sometime. These combined with some EBC Red stuff brake pads on all four corners and I couldn't be happier with my stock sized brake setup.
    76. Brett Hensinger
      12 Feb, 2014
      After replacing my passenger side rotor 3 times in 6 months. this one helped solve the problem, along with new pads, and caliper, still going strong over a year later.
    77. Brian
      10 Feb, 2014
      They are really nice brakes, it took a couple months to break the pads in. it was alittle scary somtimes going down a hill and having to come to a stop during the break in period. But once they got broke in they are great brakes. I have had them on my truck for little over a year now. The issues: brakes rumble when slowing down between 20 and 15mph, also when I installed them I didn't tighten the rotars up super tight and the rumbling must have loosened the bolts which caused them to pop out. And my brakes actually locked up. Luckily I was at a stop light when they decided to lock up on me and not the freeway. If you are instaling them yourself I recommend tightening the bolts on your brakes real good.
    78. Billy
      08 Feb, 2014
      I have had these rotors on my truck for 7 years now and have had no issues stopping. I will be purchasing another set for my truck next year. Great rotors...
    79. PLUMMA
      06 Feb, 2014
      Fantastic look easy to install and works better then I could have ever dreamed, stopping power is much better then OEM, stop pondering this purchase and click add to cart it'll be a choice you will be glad you made!
    80. Daniel Stimson
      17 Jan, 2014
      If you don't want any brake noise, stick with non-slotted rotors. Product is good and noise does not bother me, but don't expect ultra quiet.
    81. Aaron Fimbres
      15 Jan, 2014
      Just threw these on my 96 bronco xlt 5.8l, and it has been able to stop on a dime. I live where there is plenty of ice, so these have treated me well sofar. Good product.
    82. Dustin
      09 Jan, 2014
      When I first tried to install these rotors, I noticed they were both too large in diameter and in thickness. I contacted Web Offroad and they were excellent in helping me sort out the problem. They contacted EBC for me and had new rotors machined for my vehicle with the proper dimensions. Now that the proper sized rotors are installed I can say that they are functioning great so far.
    83. Vernon A. Solis II
      24 Dec, 2013
      These rotors are terrific, I have had them for several months and they are solid for a suburban. OEM rotors wrapped quickly and these are very good quality rotors and support the manufacturers statements.
    84. P. Mills
      22 Dec, 2013
      Had that dreaded shutter on my front breaks. Replace with these Rotors and couldn't be happier. Great stopping power and paired with EBC Yellowstuff pads I can tell the difference.
    85. Frank
      22 Dec, 2013
      After my wife gave birth to our first baby, I was tired of getting cut off and dodging close accidents. I purchased these rotors to make a safer stopping vehicle for my daughter, and I am glad I did. The stopping power of these mixed with the EBC Greenstuff brakes has made a hug difference. Even if my reactions aren't the quickest when someone jets into my lane, these things make up for it. Once I have to end up replacing these I will probably be purchasing new ones.They went on as a perfect fit for a 2005 Front GMC 1500 rotor replacement.
    86. BVBN
      09 Dec, 2013
      Great stopping power and no warping. Allows my EBC brake pads grab and hold. Wish I had put them on sooner.
    87. Bill Holden
      03 Dec, 2013
      I drive 70 miles a day in and out of Boston and killed my stock rotors within about 20k miles. I wanted better braking performance for those daily emergency stops and decided to purchase both these rotors as well as EBC Red Stuff pads. I and am very pleased with the increased braking performance that this combo provides and hope to get more than 20k miles of use. Typically with slotted rotors you will get some additional noise while braking. EBC reports that they have a new design that decreases this noise and I can confirm that these are quieter than the last set of EBC rotors that I purchased about 5 years ago.
    88. wegentryjr
      02 Dec, 2013
      Works great! I didn't have these spun, but they work great anyway. Definitely worth the price (which was great) and shipping was fast. I put these on front and rear '06 Honda Accord V6 with EBC Black pads.
    89. Consumer
      26 Nov, 2013
      Great quality and multiple improvement over OEM rotors they replaced. Matched it with EBC Greenstuff pads for great stopping combo.
    90. strunkl
      20 Nov, 2013
      Awesome product at a fair price. If you don't know why you might want slotted rotors, don't bother. You probably don't need them, and most people will never push their car hard enough to use the advantages the technology provides. But if you like the look or the performance of slotted rotors, these are a good choice.Just remember that these cost more than flat rotors and you won't be able to machine them if they ever warp, so you'll have to replace them sooner.
    91. Jason Plastow
      15 Nov, 2013
      This is my second car that I've installed EBC USR rotors on. These are the best rotors money can buy. They don't get rusty like most parts store brand rotors with crappy Chinese iron. They also don't scratch up like cheap rotors. You think there's no difference between one piece of metal and another? Think again!
    92. R. Lewis
      07 Nov, 2013
      Used this rotor on a Honda Civic SI. It works great and has a nice look to it. The gold wears off and becomes silver after a few miles.
    93. Sung K Jang
      13 Oct, 2013
      great rotor.stops well, no noise. no issue.using it with EBC red stuff break pad.stops better than OEM and love the look of rotor.Recommend.
    94. Sean
      10 Oct, 2013
      I purchased the Ebc UPR7372 replacement rotors for the front of my 2007 Tahoe 4x4. My previous rotors were slotted an drilled. I had them for about a year before they started to chatter while braking and caused vibration. These rotors are just as good as stock and about half the price. AutoPartsWAY was the cheapest place I could find for these rotors let alone any replacement rotors. I have had these rotors for a couple months and they have been great. They have not started to rust and still look new.
    95. R. Jankowski
      18 Sep, 2013
      I installed these on my Passat two and a half years ago. They have worked great since then and they are still going strong. If you're looking for affordable rotors that will last, I would recommend them.
    96. Scott A LeMasters
      13 Sep, 2013
      Most companies state there products are better then OEM, these brake rotors live up to that claim. These rotors where placed on a Pontiac G8 which is a heavy car, 4200#, therefore takes a good amount to stop. There where purchased along with EBC Yellow rotors and they work very well. Multiple hard stops in traffic and shown that this combo will stop well and without issue.Only downside maybe a little noise, like a flutter sound, as you are coming to a fast stop. This heard with the windows down only and if you are looking for it.
    97. AgentOrange
      07 Sep, 2013
      The black coating on the domestic series rotors comes right off as soon as you hit the brakes. I have no idea why the put it on, after washing the dust off the rims these rotors are perfect and I highly recommend them.
    98. Kevin
      05 Sep, 2013
      Don't be fooled by the picture as I was. When I purchased these, AutoPartsWAY did not specify front or rear replacement! I went by the picture and assumed they were the front, They are NOT!!! I have contacted AutoPartsWAY to correct this, but so far I see no changes. The correct number for the front rotors is: "GD7090". They are also available on AutoPartsWAY and are much cheaper than at the local auto parts store. If you can even find the slotted rotors. I have not used these as of yet, still waiting on the correct ones to arrive, but my expierence with slotted rotors has been great! There is no fade in braking and the rotors are not as prone to warping as with solid rotors.
    99. Fishing.775
      03 Sep, 2013
      Benn in for the summer and doing great, I pull a boat behind my fifthwheel and I can't yust trust any break parts in the mountains.
    100. Mark Pearson
      02 Sep, 2013
      Tired of OEM rotors on my Saturn warping after overheating due to long downgrade, I replaced them with these G3000 iron rotors. Brakes no longer pulse at low speed and cause shimmy at high speed.Seems to have done the trick
    101. Phil D. "phildvegas"
      30 Aug, 2013
      These rotors are amazing compared to the stock ones. This will be the third set that have been on the car and I believe that they will be the last. They fit on the hub correctly and there were no special items needed. I would recommend following the break-in procedure so that you can guarantee that they will last. I highly recommend this brand and series to anyone that is having troubles with rotors warping under normal city driving conditions! For 2 of them at the listed price, you cannot go wrong!!
    102. David Waters
      20 Aug, 2013
      A little noisy, but hasn't warped under my somewhat aggressive driving style. The feel is a little different too, but it seems to work well. No real complaints.
    103. Master Woo
      09 Aug, 2013
      Just received these rotors and from the get go it looks clean and of high quality build. I've always used Powerslots previously and decided on these as they come in black along with EBC red stuff. I will post an addendum to this review upon install and road test for a period of 2 weeks, and will include Break-in, noise, vibration ect.
    104. Benjamin J. Wormald
      09 Aug, 2013
    105. J A
      05 Aug, 2013
      the best breake rotors out within the price range i paid for themworked like a charm. easy to install too
    106. kewlx
      03 Aug, 2013
      Good for the front but they didn't have the performance with the drilled and crossed rotors so theese were next best...keep a wipe or towel on you when you open these..filled with oil.
    107. Michael H.
      23 Jul, 2013
      WOW!! these (coupled with the redstuff pads and goodridge lines) make for an incredible stopping experience! They are not noisy for normal around town driving. They do get a bit loud when hauling my maxima down from triple digit speeds quickly, but they are dimpled and slotted so I fully expected them to make more noise that the smooth OEM versions. Great purchase!
    108. J. Jung
      22 Jul, 2013
      The rotors are for my 2003 Silverado Extended Cab 4X4. At first they were noisy to the point that it sounded like I was trying to stop with gravel rather than normal brakes. Even when I started driving around, when not applying the brakes, they were noisy. This lasted about 20 miles, with each mile getting quieter than the last. I also purchased the EBC 6000 series pads which is where most of the sound came from. I followed the EBC bed-in procedure to brake in the pads for 400 miles. With the rotors and pads from EBC, the truck stops better, smoother, quieter and shorter than any other combination I have used to this point. We've put on over 3000 miles with the new brakes, and I like them more with each mile. I've been working on cars and trucks for 45 years, and while I now live in KY, I spent most of my life in western PA where you take brakes seriously!
    109. Galaxy S3
      19 Jun, 2013
      These Rotors paired with the Redstuff pads have some serious breaking force. They make a little road noise, but I'm still under the 1000 miles estimated to completely bed the brakes. Much more sensitive then the stock pads and rotors in my Jetta. I strongly recommend theses to anyone who wants a low dust solution for breaking. These rotors also look boss!
    110. Gale
      07 Jun, 2013
      What can I say, they're brake rotors. They worked well and fit the application. The only downside is that EBC advertizes these as corrosion resistant but they rusted immediately. But like I said, they're brake rotors and did their job as designed.
    111. Timothy Haak
      04 Jun, 2013
      Loved the look of these right out of the box! Installation was easy, took about an hour for rotors and pads. Bedding in was easy. Wind noise is negligible. Braking power easily 40 to 50 percent better than stock; and that's just the rears! Doing the fronts soon to upgrade overall braking. Definately recommend and would buy again.
    112. Adolfo
      09 May, 2013
      These rottors are amazing, super quiet, powerful and best of all look great! They come black like shown on the picture but after driving out of the driveway they get silver color exposed, but they do look great regardless.I was wondering if I can get these for the back set of my lexus is 250EBC Brakes USR7223 USR Series Sport Slotted RotorPlease advise,Adolfo
    113. Alex
      07 May, 2013
      Put these on my Rx8 and after 300 miles I can say that they look really good. They are also just as quiet as OEM. I can't really tell about the performance factor because I'm not using the same kind of pads prior to these new rotors, so I can't compare.
    114. Eyegor "E"
      18 Apr, 2013
      I have a Subaru Legacy 3.0R and have had problems since I've owned it with disc rotors warping and fading during stops.After doing some research, I settled on EBC Slotted Rotors and EBC "Green Stuff" pads. I looked at quite a few web sites that sell Subie parts and all of them charged much more money for the EBC parts for my car. AutoPartsWAY delivered the goods quickly and I installed the parts on a Saturday morning and was back in action by the afternoon.The break-in period was very short since EBC has an abrasive coating on their pads.My car now stops fast and straight and I haven't seen any fading issues at all. I'm VERY happy.
    115. Don "2ocnorb"
      02 Apr, 2013
      These are the second set of these rotors i've purchased. So far so good! Install perfectly with no fit-up issues. Quiet and are less apt to warp. I will definitely continue to purchase these rotors for my vehicles.
    116. Steven Roka
      18 Mar, 2013
      I didn't expect to feel too much of a difference. Not sure if it was the rotor or the EBC Greenstuff pads but the braking in my car is way beyond what I had with stock rotors and pads.
    117. unseenone
      13 Mar, 2013
      I am on my 2nd set of EBC Rotors. On an LR3 the factory rotors were shot at 20k miles, and could not be turned at all. The First set of EBC lasted 80k miles, and had life left in them, but I replace them all with new ones when getting other work done, just to save the hassle of additional service.Each time you fit your new Green Stuff pads, just get a light turn or cross off the rotors, and you will avoid any brake fade. Remember to replace the wheel nut, and to spline / set it so it cannot back out.EBC is great stuff, and definitely good stuff.
    118. Pen Name
      06 Mar, 2013
      I got these breaks at the end of January 2013. I have them on my 93 accord. They are great. Much better than OEM rotors. They where a bit difficult to install because everything else had been on there so long, but I have had them on for about 600 miles now. They stop on a dime if you pair them up with EBC's yellow stuff break pads. I ended up needing to replace my calipers as well, so needless to say my set up is all new and I love it.
    119. thomasb12321
      01 Mar, 2013
      I bought these to replace my stock rotors because they were warped. They fit perfectly and look good on the car.
    120. Hoagies Garage
      14 Feb, 2013
      I bought these for my LS1 SS Camaro. The car is driven daily and also tracked from time to time on a road course. These are coated black, and when you use them they turn silver where the pads touch. The rest remain black to avoid rust and discoloration, so they always look great on your car.I paired them with EBC Yellow pads and I am in the process of breaking them in. I have never had issues with EBC Products, and these so far seem to be another great set of rotors.When compared to stock, I do not know how much better these will hold up to heat and warping, but time will tell.
    121. Dan
      13 Feb, 2013
      The product seems equal in quality to my original rotors (and well within tolerances) for fit. I ordered this product for my Nissan Maxima 2002 and overlooked that these were rear rotors:*Note: Rotor; EBC UPR Series Premium OE Replacement Rotors; Each; Rear; 10.9 in. Dia.;The picture is of the front rotors which threw me off a bit.
    122. Hiya
      10 Feb, 2013
      So far so good the pads and rotors work great. Thought I was going to have to buy a brake system for a Tundra to stop the rotor warping problems. I purchased the rotors with the matching pads for a SUV. The vehicle stops so much smoother and quicker than before. Also there was a warning of brake noise with the new stuff but I don't seem to hear any. The other rotors would've been warped by now, but it has been a couple of months and no problems.
    123. Stephen Grant
      05 Feb, 2013
      If these fit my car(2001 jetta TDI) it would have been so much better, but they look really really nice and had a great price
    124. A. Roberts
      30 Jan, 2013
      These rotors are quality workmanship, but it's my first time having slotted/dimpled rotors and they are kind of noisy. The only way to find out (other than installing them) is to look in the FAQ of the manufacturer's website. They are not quiet like a normal OEM rotor. Otherwise my car stops great and I have no complaints about the performance.
    125. palehorse24
      25 Jan, 2013
      I installed these on my 2004 Ford F150 SuperCrew 4x4 with the hope of decreasing my stopping distances,which seemed excessive. They were easy to install, look good and work well with the EBC "Green-Stuff" brake pads. They have been on the truck almost 9 months and are as straight and true as the day I installed them. Absolutely no warping, squealing or anything. Stopping distances have improved so I would recommend this combination over the "parts-store" brand or OEM.
    126. Nair
      23 Jan, 2013
      These brakes stop my 2007 Dodge Charger on the dime. The brakes on my car were always a weak point. Not anymore! They perform surprisingly well in wet conditions as well! Cudos to EBC!
    127. merkranger
      19 Jan, 2013
      I have had a set of these on my svt brake converted sedan for years now.THEY ARE GREAT!!!!I have had ZERO grooves and wear issues with these rotors front and rear. As another user said the svt focus ones are plated with black zinc. There is some surface rust in the wear zone after rains and such till you use them, but nothing serious, and it remains black wherever the rotors are not being contacted by the pads.I use these with a set of red stuff pads, and the braking force is easily controlled, but gets Far stronger than any stock ever could. Even with the slots trimming the pads, there is so little dust that even with MONTHS between washing, all you see on your rims is road dirt.....Plus if you have a issue with quality, you Will get the attention from the manufacturer you could hope for.Rotors and pads are one of the most effective and cheapest ways to upgrade your brakes, and a investment here will safe you money, time, and maybe your...
    128. M. Paul
      13 Jan, 2013
      Can't beat it, paired with ale bono pads. Best decision I made in researching for right replacements. Really good braking power.
    129. AutoPartsWAY Customer
      07 Jan, 2013
      Installed these on my Dodge 2500 with no issues. I tow a trailer regularly and needed the extra cooling capability these provide.I have no brake fade issues resulting from excessive heat. I did not notice any noise during use as was reported by some other people.
    130. Old Guy "ADS"
      31 Dec, 2012
      I ordered a set of rotors and pads for my 2006 Subaru. These cars can be sensitive to aftermarket parts and because of that I have always tried to buy genuine Subaru parts from a dealer. But, Subaru, or their dealers, have gotten pretty proud of replacement parts and I find it difficult to swallow a 2 1/2 to 3 times price difference. So I read some positive reviews and took the plunge. I was not disappointed! As it becomes necessary, all my other vehicles will use EBC parts and pieces.
    131. leslie goolcharan
      23 Dec, 2012
      EBC best of the best with their perfoprmance products and great price here. Instructions are easy to read and implement.
    132. wilfrido benjamin gamboa
      23 Dec, 2012
      worry free purchase. peace of mind with every order. Great service and satisfaction. Will purchase again. When I need Brakes again :D
    133. Paul Fontecchio "RbtOwnr"
      20 Dec, 2012
      Put these on my girlfriends 04 Acura TSX. She hasen't seem to have warped them yet (and she can warp any rotor it seems). These rotors are not coated, they do rust in all locations except the pad running surface.
    134. Lonewolf_NW
      17 Dec, 2012
      I live in Oregon where it rains a majority of the year. I have to say the difference in performance between these and the OEM rotors on my '04 Ford Focus SVT is night and day. I used to think that the brakes were pretty good on my SVT as it were, now they are even better. When it is pouring buckets I don't have any and I mean ANY of the wet brake fade I would normally experience with the OEM setup. I mounted a set of these in front and a set in back (different part numbers for each) and it has made all the difference in the world. Also I am using a set of the EBC redstuff ceramic pads front and rear as well.
    135. AutoPartsWAY Customer
      15 Dec, 2012
      Review is for 3GD series rotors and 7000 series Greenstuff pads I installed 1500 miles ago.So farThese went on a mostly stock 2005 Silverado 1500 with 35 in tires.Look good and stop good. Went on easy just like factory parts. Deffinately stronger than stock and probably good for normal driving or towing. Great if you have stock tires or even up to 33'sI was a little dissapointed with the coverage of the pads on the rotors. The pads are kinda small and leave a lot of wasted surface on the rotors. They still work good but I can't help but think they could be better if the covered more of the rotor.When pushed hard they are just ok with the 35's, I'm going to be converting to a hydroboost setup to try to get more brake power. I have not towed a heavy load with these but I'm hoping they won't warp as easily as the stock rotors do.
    136. R. Miller
      29 Nov, 2012
      I shopped around and these rotors were everything I was hoping they would be. The EBC rotors were put on the front of my Toyota Tundra and made a significant difference from the original Toyota factory rotors; however, I did replace the pads with Toyota original brake pads. The combination is working great.
    137. Hoagies Garage
      09 Nov, 2012
      I have run these on my Camaro for about 300 miles so far. They are very nice looking rotors and seem to be up to the EBC quality standards. They came fully black in color, then the coating wears away after the first drive down the road.I had great results with these on the back of my car, I'm expecting the fronts to be just as good. The EBC Yellow Pads with these seem like a great combination.
    138. Brian J. Brock
      29 Oct, 2012
      Installed these with EBC greenstuff pads. They work wonderfully. No squeals, ever. Very easy installation. Shipping was fast. Will do the rear brakes in short order with EBC components.
    139. Aaron Schaller
      24 Oct, 2012
      I have these installed on my 2008 Nissan Altima 2.5 as I burned through a set of rotors and 2 sets of brake pads in one year. I do drive my car hard, but I expected more out of what was already on the car. Needless to say I had a friend take these to be installed in September 2010 while I was deployed with the Red Stuff pads and they are unbelievable. I ahve just now replaced the pads and quick resurface of the rotors (October 2012). Great customer support as well through the buyer and was even sent an extra set of front brake pads after when I ordered the rear rotors were out of stock and eventually received the rear rotors. Great purchase and stopping power for any car and driver. Excellent price cant beat it.
    140. Verns
      17 Oct, 2012
      They look cool if you have wheels that can showcase the slots. Stopping power noticeably improved as I paired these with EBC Greenstuff pads. However, they definitely make a louder sound under hard breaking.
    141. Alexander173
      13 Aug, 2012
      It's been a couple of months since I bought these rotors and I can definitely tell the difference in braking power. I combinded these rotors with EBC brake pads and I love them (hardly any brake dust).
    142. Marc "Marc"
      25 Jun, 2012
      I've been changing brakes for years and typically have always went with the cheapo replacement type rotors. This time however I decided on a nice set of pads and rotors. I purchased these rotors (USR972) along with the rear set (USR728) with the front and rear brake pad sets (UD1004 & UD929). I am thrilled with this purchase. Rotors and brake pads went in flawlessly on my 2004 Subaru WRX. No rotors are coated in EBC's protective black coating. This wears away during first use however.All in all, these rotors were fantastic and I would recommend them to anyone. Great stopping force, direct replacement and slotted to expel heat easier and last longer.What are you waiting for? Click buy!
    143. Picky Parker
      08 Jun, 2012
    144. D. Waters "H20"
      31 May, 2012
      The Zinc coating was pretty cool; obviously, wearing off after a couple of rides. But hope to reduce the rust. Nice, stops well, and was perfect for that drive to the NC mountains.
    145. phil900
      15 May, 2012
      For NON-VENTED cheap but factory grade rotors, these were worth the purchase especially since I replace my rotors every 15k or so.
    146. LeoP
      08 May, 2012
      The Ebc slotted rotors look really good out of the box, but they were even sharper on my truck.This is my second set of rotors for my 2005 truck and I can really tell the difference. The one before were a heavy set too. I would recommend this product.
    147. ReyAce
      07 May, 2012
      Have been running them for about six months, so far so good. Used in combination with EBC pads, can't say I noticed much of a difference in braking really, but the dust is definitely less than stock Toyota. No squeaks, either.
    148. cbr
      03 May, 2012
      I put these on my 2006 GMC Yukon Denali with EBC Green Stuff pads. Install was easy and they fit beautifully. My braking was definitely improved, but not quite as much as I hoped. If you really want to stop on a dime I would go with a larger rotor.
    149. Do-it-yourselfer
      01 May, 2012
      I bought these and combined them with EBC redstuff brake pads. The combo is SO AWESOME. I have to really go easy on my braking or these babies will just chomp down and bring me to a complete and utter stop. There is a little noise when slowly coming to a stop. It's like a low toned whrrr, like a big machine winding down. I LOVE it though. I know they are truly working every time I hear it.
    150. Douglas Adler "DUG 320"
      28 Mar, 2012
      They seem to work well, only time will tell.I wish the black from the zinc coating was permanent as it looked really cool until it rubbed off.
    151. sdenmark
      27 Jan, 2012
      This model rotor fits the 1998 Saab Convertible, not the 2006... despite what AutoPartsWAYs auto check feature says. Before ordering front pads and rotors on 2006 Saab 9-3 Aero Convertible's V6, check your drivers door panel for your brake code: AA, AB, or AC then call the dealer to determine the size of your rotor. Mine was 16+, 314mm, 12.4 inches. Yes, there is a possiblity of three different sizes for GM Saab Convertibles. I had to return breaks and rotors to AutoPartsWAY for different parts. I'm assuming the return will go smoothly as I refused at the door.
    152. Lewis Carol
      09 Jan, 2012
      These brakes are working very well on a 2000 range rover hse. I used the EBC greenstuff pads for long rotor life. The pedal effort to stop is much less then before and the brakes are very quit after a few miles to remove breaking coatings. Please note the correct rotation direction with EBC rotors. The boxes are labeled for which side the rotors will go on with a small R or L sticker. The rotor slots touch the bottom of brake pad first when turned in forward direction. This is different from other manufactures but helps to give longer pad and rotor life. I DIY with my 9 year old son and it went very well.
    153. Maverick
      31 Dec, 2011
      Very well made and finished and work great!!! I searched high and low for a good deal on some really well made rotors and I have to say there is a lot of garbage out there that is downright scary!!! These are beautifully made and work just as well. The best part of the deal was the price for quality and the Prime shipping...saved me hundered over may other sources as these are really HEAVY!!!
    154. Thumper
      27 Dec, 2011
      These EBC Black Dash Slotted USR Rotors matted with the EBC Red Stuff Pads are the best hands downi have read some reviews where others say they make noice are not good won't buy them againwell you have to put 2 peas in a brain or pod togethere lolthese work greatsee the thing is when you hear the noice you have the Paint on the rotors that need to come off and then the Coating on the EBC pads weather they are green red or blue stuff or any other pad they have they are coated with a pink or red coatingthat comes of with the Bedding in Period you need to read the instructionsand not think you know eveyrying about these before you use themi have put about 750 miles on my rear and 250 miles on the front EBC Black dash slotted rotor sand Red Stuff pads all around 2 weeks apart and i am almost broken in i say another 500 miles and i will be ready to really get up on these brakes and have some funlove them
    155. Warneke
      04 Dec, 2011
      Very pleased with these rotors. Would have given it 5 stars if the vendor had bothered to mention they were for the rear brakes. Made for a frustrating afternoon.
    156. Ivan Suarez
      25 Nov, 2011
      They look and feel great. They seemed slighly smaller than the current rotors but wow they take a helk of a bite!
    157. Miniban
      23 Nov, 2011
      These rotors are nice. Perfect fit for my 02 Ody.Dial indicated these after installing and they were perfect .000" runout.
    158. Jay shopping for stuff "J"
      14 Sep, 2011
      In case it's not obvious, you only get one rotor per order, so you have to put in a quantity of 2. The rotor feels nice and solid and very thick! I looked for reviews online and most people said these were better than OEM. By the looks of it, they are! Very heavy and very well polished surface. Been in my car for 2 weeks and so far I've had nice smooth stops.
    159. dcalm
      11 Sep, 2011
      These were the first pair of rotors I have purchased since starting to do more car projects on my own. I bought them for my 2007 Nissan Altima. I don't really think that it was necessary to get slotted and dimpled rotors for a daily commuter, but I wanted quality. These rotors are definitely a higher quality product than OEM rotors, as they wear in a much more even pattern and don't seem to be warping yet (I've had them for a year). My only complaint with these is not directed at EBC rotors, it's just that slotted and rotors tend to make a lot of noticeable noise when traveling at low speeds. I would highly recommend these to anyone so long as the noise doesn't bother them.
    160. Disneyfans
      06 Sep, 2011
      This product arrived quickly and as described. We installed these rotors along with EBC Greenstuff pads which compliment each other very well. Braking performance has increased immensely after the installation of these rotors.
    161. AutoPartsWAY Customer
      23 Aug, 2011
      I bought these for my 2000 dodge ram 1500 and do they ever work great! breaks stay nice and cool no fade and the break dust is all most gone! These rotors are worth the purchase!
    162. ememen
      03 Aug, 2011
      These rotors are as good as any I have ever put on my cars, including those from that famous Italian brake company. The price was great and I would get them again.
    163. JLDET5
      01 Aug, 2011
      These install easy and work great. They do make a small amount of air noise that may sound like grass hoppers but it is not at a level that I really notice. I have to have the windows open and near something that will reflect the noise before I can hear it. EBC recommends the backdash rotors if you find the noise a problem but I really don't think its enough to worry about.
    164. Don Bellehumeur
      24 Jul, 2011
      after 1000 Miles with EBC Green stuff pads and slotted rotors these brake rotors and pads stop better than stock.........so far i am pleased with the results......i was concerned they might be noisy.....not so...they are almost as quiet as stock rotors but stop in less of a distance
    165. rickfriscotx
      30 Jun, 2011
      Put these in a 98 eclipse GT and worked great. Now have a 06 eclipse GT and get the same great results.
    166. B. Kocsis "themachine"
      30 May, 2011
      I Paired these up with the Greenstuff pads and will never go back. I have about 19k miles on them and they still look new. Everytime I change my oil I check them and hardly notice any wear. I love them especially in wet weather. Well worth the price for any car.
    167. ihsan "ihsan"
      12 May, 2011
      I bought these as a substitute for the stock rotors on my Accord, when I changed brake pads to EBC Yellowstuff. For some reason, they were priced almost the same.The quality is good. I use my brakes harder than most people, and the rotors are taking it with aplomb.
    168. Marcin
      06 May, 2011
      I've had some bad luck with rotor warpage on my Civic with aftermarket rotors. Of course, they were quite a bit cheaper than these EBC's. I finally decided to spend some real money to get some real quality. I haven't been disappointed. Now, i don't beat the hell out of my brakes, but am not afraid to use them either. These rotors not only look good, but have performed flawlessly so far. I can't speak for track/autocross usage, but on the street, they rock. I'm using some EBC pads with these and they're a good match. Good braking performance. I have about 10k on them and the cheap rotors would have been way warped by now. These feel like new.
    169. unclassified
      12 Apr, 2011
      I bought these for my 2001 Z28, I installed them with New Autozone Duralast Gold Ceramic Pads, Greased the hardware and broke the combo in according to EBC's website. The person who said they were loud: the EBC Pads are actually the problem, I used them with my old rotors and know what you mean..
    170. Olmstr "Old master"
      03 Apr, 2011
      After I installed the new rotors and pads I went for the test drive. The damn rotors sounded like I had knobby tires on my Altima what a terrific racket, and when I came to a complete stop there was a loud clunk.After four or five good stops and a cool down on the new stuff I drove it again and it is perfect, what can I say I love them.They acted just the way the distributor said they would, why I had doubts?The only problem I had was with the calipers on the car nothing to do with the rotors.
    171. Chad E. Roberts "Batman"
      12 Mar, 2011
      Thought these were a bit expensive but paired with the EBC green brake pads it has made a noticeable difference in the poor factory brakes on my Ram 1500.
    172. William H. Ryder "mechanic"
      07 Mar, 2011
      i put them on my 2008 f150 AutoPartsWAY has the best price they are worth the money . roters today are cheap but they dont last .if you want to upgrade your brakes get them also use the ebc greenstuff pads your brakes will last a long time.
    173. Froy "Froy"
      13 Nov, 2010
      I bought these for a 2006 Honda Accord V6-Automatic. They are replacements for the original front discs which were causing my car to shake when braking from high speed. After replacing the front discs the shaking of the car stopped. Make sure to get a Phillip head impact wrench to remove the 2 screws that hold the disc in place. It would make it a lot easier to remove the old discs with the impact wrench. Also get new Phillip screw from a Honda dealer to replace the ones that are removed since the old screws will be probably be unusable. Good replacement disc for Honda Accord.
    174. Mario Jose J. Manzanero "nosmanta"
      14 Oct, 2010
      These rotors are very easy to prep and install and improves braking by a lot compared to stock rotors if paired with matching EBC pads. I will buy again!
    175. Gadget Guy
      07 Oct, 2010
      Quality product that replaced warped rotors. AutoPartsWAY was $30 less than the best price I could find elsewhere.
    176. S.McKnight
      26 Sep, 2010
      These rotors look great and stop even better Matched up with power stop green stuff pads, truly impressive
    177. B. Bauer
      10 Aug, 2010
      Rotors came as a set (L/R) for my 2002 Toyota Tacoma. Rotors are clearly stamped R or L. Received the black ones. Black color wears off on rotor face within minutes leaving standard silver color. Slots and holes are only routed into the surface so don't think they are cross-drilled all the way through. Nicely built. Fit to the Tacoma without issue.
    178. M. Shulman
      24 Jun, 2010
      These EBC rotors work very well and even look good too. They fit perfect and my brakes seem to be stronger during repeated braking.
    179. Darren Gutwein
      22 Jun, 2010
      I've recently installed the EBC 3GD rotors on my 2004 GMC Sierra on all 4 wheels. These rotors, when combined with Hawk LTS pads, are proving to be vastly superior in braking performance vs stock. I have previously used ferro-carbon pads with standard rotors, and while that configuration was moderately better than stock - the difference in using these EBC rotors is astonishing.The quality of this product is very good, and I had no issues installing them on my vehicle. There was a notice or warning included regarding noise generated by the design of these rotors, but I have not noticed any difference vs stock vented rotors.
    180. Joel C
      16 May, 2010
      I changed all 4 on my 2002 Acura RSX & its working pretty good. I do notice a woo-ing sound. Could be b/c the way the air goes thru the holes, but I'm not sure if that sound was there from before.
    181. J. Smith
      02 Sep, 2009
      I was looking for a known brake parts supply, EBC was highly recommended by a relative who was experienced in brake parts; my order was shipped and received promptly, and of very good quality.

    Loading...