Chrysler Parts
Choose a Year for your Chrysler
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
1976
1975
1974
1973
1972
1971
1970
1969
1968
1967
1966
1965
1964
1963
1962
1961
1960
1959
1958
1957
1956
1955
1954
1953
1952
1951
1950
1949
1948
1947
1946
1942
1941
1940
1939
1938
1937
1936
1935
1934
1933
1932
1931
1930
1929
Image
Product
Price
- Class 3 Hitch; 2in. Receiver; Select Chrysler; Dodge; Volkswagen; Ram Minivans
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight With Stow and Go Seats Square Main Body~No Drilling Required~For Models w/Stow And Go~Visibility: Concealed~Install Time 25 Minutes
- CURT 13364 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Chrysler; Dodge; Volkswagen; Ram Minivans
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: No
- Install Time: 25 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chrysler Town & Country, Dodge Grand Caravan, Ram C/V and Volkswagen Routan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2010 - Chrysler Town & Country | V | 3952 | Rear | 6 Cyl 4.0L | Touring | 241 |
- Class 3 Hitch; 2in. Receiver; Select Chrysler; Dodge; Volkswagen; Ram Minivans
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~For Models w/Stow And Go~Visibility: Concealed~Install Time 25 Minutes
- CURT 13364 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Chrysler; Dodge; Volkswagen; Ram Minivans
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: No
- Install Time: 25 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chrysler Town & Country, Dodge Grand Caravan, Ram C/V and Volkswagen Routan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2015 - Chrysler Town & Country | V | 3604 | Rear | 6 Cyl 3.6L | S | 220 |
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04892339AA, 05038041AA, 05047769AA, 12640445, 12667194, 12670058, 1651078J00, 19303975, 4115031, 57060, 57073, 68197769AA, 7060, 7073, 729854, 89017524, L12222, M1113...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Chrysler 300 | V | 3497 | 6 Cyl 3.5L | Touring | 215 |
- Oil Filter
- H-3.75 in.; OD-3 in.; M22x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.060 In. (103mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Chrysler 300 | V | - | 8 Cyl 5.7L | S | 345 |
- Performance Air Intake System
- Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.68 HP At 6215 RPM;CARB E.O. D-269-37
- K/N s roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Filtercharger Injection Performance Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.68 Hp @ 6215 Rpm
- TUV Approved (Europe): No
- Replacement Filter: Rf-1048
- Item Weight: 9.700 Lbs. (4.4 Kg)
- RPM: 6215
- Product Box Height: 12.250 In. (311mm)
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Product Box Width: 12.250 In. (311mm)
- Air Filter Outlet Length: 6.000 In. (152mm)
- Product Box Length: 20.250 In. (514mm)
- Clamp Quantity: 6
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Color: Black
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: High-density Cross-linked Polyethylene
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Washable And Reusable Lifetime Air Filter
- Easy To Install Usually In 90 Minutes or Less
- Replaces Entire Factory Air Intake System
- K&N Million Mile Limited Warranty
- A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Chrysler 300 | V | 3497 | 6 Cyl 3.5L | Limited | 215 |
- Performance Air Intake System
- Polished; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.66 HP At 4854 RPM;Not Legal For Sale Or Use In California
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.66 Hp @ 4854 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 11.500 Lbs. (5.2 Kg)
- RPM: 4854
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Intake Pipe Inlet Length: 11.500 In. (292mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 11.500 In. (292mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2022 - Chrysler 300 | V | - | 8 Cyl 5.7L | S | 345 |
- Performance Air Intake System
- Polished; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.66 HP At 4854 RPM;CARB EO: D-269-76 Excluding Shaker Hoods~69 Series - Metal Intake Kit For Sport Compact & Sports Car; Polished [CA]
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.66 Hp @ 4854 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 11.500 Lbs. (5.2 Kg)
- RPM: 4854
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Intake Pipe Inlet Length: 11.500 In. (292mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 11.500 In. (292mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2015 - Chrysler 300 | V | - | 8 Cyl 5.7L | C Platinum | 345 |
- Performance Air Intake System
- Polished; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.66 HP At 4854 RPM;Not Legal For Sale Or Use In California Excluding Shaker Hoods~69 Series - Metal Intake Kit For Sport Compact & Sports Car; Polished [CA]
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.66 Hp @ 4854 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 11.500 Lbs. (5.2 Kg)
- RPM: 4854
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Intake Pipe Inlet Length: 11.500 In. (292mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 11.500 In. (292mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2020 - Chrysler 300 | V | - | 8 Cyl 5.7L | C | 345 |
- Performance Air Intake System
- Polished; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.66 HP At 4854 RPM
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.66 Hp @ 4854 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 11.500 Lbs. (5.2 Kg)
- RPM: 4854
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Intake Pipe Inlet Length: 11.500 In. (292mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 11.500 In. (292mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Chrysler 300 | V | - | 8 Cyl 5.7L | S | 345 |
- Performance Air Intake System
- Polished; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 11.66 HP At 4854 RPM;CARB EO: D-269-76 69 Series - Metal Intake Kit For Sport Compact & Sports Car; Polished [CA]
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 11.66 Hp @ 4854 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 11.500 Lbs. (5.2 Kg)
- RPM: 4854
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- System Type: Cold Air
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 12 Hp
- Intake Pipe Inlet Length: 11.500 In. (292mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 11.500 In. (292mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Chrysler 300 | V | - | 8 Cyl 5.7L | C | 345 |
Showing 1 - 10 of 22475 products
Loading...