Trailer Light Electrical, Lighting and Body Parts
Image
Product
Price
- Replacement LED Lights
- Replacement LED Lights For 87641 and 87247 Set of 3
- Product Attributes:
- Prop 65 Y/N: Y
- Drilling Required: No
- Estimated Install Time (Hours): 0.5
- Compatibility: 87641 And 87247
-
Features:
- Limited 90 Day Warranty
- Husky Towing Products offers innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Combination Passenger-Side Trailer Light without License Plate Illumination
- CURT 53440 Passenger-Side Combination Replacement Trailer Light; Stop Tail Turn
-
Features:
- Designed To Replace Rear Trailer Lights On Most Trailers
- Functions As A Tail Light Brake Light And Turn Signal
- Two Extra Connections Provide Hookups For Other Lights
- Features A Molded Housing w/Standard Red Lenses
- Phosphor-Bronze Contacts For Good Connection In Extreme Condition
- Bolt-On Mounting System For Secure Installation On The Trailer
- Exceeds Dot Requirements For Reflectors And Markers
- Made In USA
- Phosphor-Bronze Contact For Good Connection In Extreme Conditions
- Trailer lights can be fragile, but they are completely necessary for towing. Whether youre a contractor on your way to the jobsite or just a casual fisherman heading to the boat landing, you need working trailer lights to tow safely and legally. For any towing setup, CURT offers quality, DOT-approved trailer lighting, including complete wiring kits, combination lights and replacement lighting components. This CURT combination light is designed to be a passenger-side trailer light. It features a molded housing and molded lenses to protect the internal components from the elements, and it uses phosphor-bronze contacts to maintain a solid electrical connection to your vehicle. This taillight comes with red lenses and two extra connection points to provide hookups for other lighting fixtures. It easily and securely mounts with the included hardware and does not have a separate light for license plate illumination.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Auxiliary LED Indicator Lights
- CURT 53201 Auxiliary Automotive LED Light Strips for Hitch Cargo Carrier; Bike Rack; 2-Pack
-
Features:
- Indicator Lights For Safety On Cargo Carriers Or Bike Racks
- Double Row Of Leds Correspond With Brake Turn And Running Lights
- Industry-Standard 4-Way Flat Connector For Quick Installation
- 3M Adhesive Backing For Secure Convenient Mounting
- Durable Waterproof Construction For Lasting Weather Resistance
- Limited Lifetime Warranty Three-Year Finish One-Year Parts
- CURT auxiliary LED indicator lights add extra safety and visibility to your vehicle when towing a cargo carrier, bike rack or other hitch-mounted accessory. Simply stick them on, using the included 3M adhesive backing. These LED cargo carrier lights easily plug into your vehicles standard 4-flat connector and synchronize with the taillights, brake lights and turn signals. CURT LED indicator lights are constructed to be durable and waterproof to long outlast the elements.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- INCANDESCENT THIN LINE, COMBINATION, RECTANGULAR, W/LICENSE LIGHT
- Incandescent Thin Line, Combination, Rectangular, with License Light, 8.8125"X5.0625", red + white, bulk pack
- Product Attributes:
- Replaceable Bulb: Y
- Container Type: Bulk Pack
- Bulb Technology: Incandescent
- Lens Color: Red + Clear
- W/ License Light: Y
- Shape: Rectangular
- Integral Reflex: Y
- California Prop65 Required: Y
- Filament Quantity: 2 + 1
- Light Color: Red + White
- Bulb/Diode Count: 2
- Mounting Type: Surface
- termination: Stripped Wire
- Regulatory Compliance: Dot
- Submersible: N
-
Features:
- Available in retail-friendly Viz Pack.
- Grounds through mounting hardware.
- Designed for horizontal mounting.
- Popular for use on enclosed trailers or recreational vehicles.
- Available in manufacturer’s pack or visual pack.
- Integral Reflex.
- Combination tail light with polar white base.
- Attractive rounded shape.
- Rugged, corrosion-resistant bulb socket.
- Includes the following functions: stop, turn, tail, rear reflex, and license light ("L" suffix).
- M457L includes license illuminator and license plate mounting bracket.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- INCANDESCENT STOP/TURN/TAIL, RECTANGULAR, RV W/REFLEX W/ LICENSE LIGHT & BRACKET
- Incandescent Stop/Turn/Tail, Rectangular, Rv with Reflex with License Light & Bracket 8.5625"X4.625", red + white, Viz Pack
- Product Attributes:
- Replaceable Bulb: Y
- Ground Type: Stud
- Container Type: Viz Pack
- Bulb Technology: Incandescent
- Lens Color: Red + Clear
- W/ License Light: Y
- Shape: Rectangular
- Integral Reflex: Y
- California Prop65 Required: Y
- Filament Quantity: 1
- Light Color: Red + White
- Bulb/Diode Count: 1
- Mounting Type: Surface
- termination: Stripped Wire
- Regulatory Compliance: Dot
- Submersible: N
-
Features:
- Available in retail-friendly Viz Pack.
- Integral Reflex.
- Surface mount rear combination tail light.
- Available with or without integral back-up light.
- Available with or without integral license light & plate mounting bracket.
- Popular for RV applications.
- Self-service Viz Pack packaging.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This Part Fits the Following OEM/Substitute Numbers:
30-92-003, 30-92-108, 31-92-003, 34-92-003
This item is not specific to any vehicle. Click here to learn more
- INCANDESCENT COMBINATION, THIN LINE, UNDER 80", W/O LICENSE LIGHT 4.50"X4.75
- Incandescent Combination, Thin Line, Under 80", w/o License Light 4.50"X4.75", red, Viz Pack
- Product Attributes:
- Replaceable Bulb: Y
- Ground Type: Stud
- Container Type: Viz Pack
- Bulb Technology: Incandescent
- Lens Color: Red
- W/ License Light: N
- Shape: Square
- Integral Reflex: Y
- California Prop65 Required: Y
- Filament Quantity: 2 + 1
- Light Color: Red
- Bulb/Diode Count: 2
- Mounting Type: Stud
- termination: Stripped Wire
- Regulatory Compliance: Dot
- Submersible: N
- Mounting Centers: 2
-
Features:
- Available in retail-friendly Viz Pack.
- Assembled in USA.
- LED version available.
- Integral Reflex.
- Combination rear light for vehicles and trailers under 80" wide.
- Includes the following functions: stop, turn, tail, rear reflex, side marker, side reflex, and license light ("L" suffix only).
- Viz Pack and poly pack units include lead wire.
- Manufacturers pack features push-in connections with two extra ports for additional lights.
- Mounts on 2" centers and includes mounting hardware.
- Grounds through 1/4" mounting studs.
- V440-15 lens kit contains two lenses: 440-15 & 55-15R.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This Part Fits the Following OEM/Substitute Numbers:
2823284, 50542-5, 52302-5, 535D
This item is not specific to any vehicle. Click here to learn more
- LED STOP/TURN/TAIL & SIDE MARKER LIGHT RECTANGULAR, SUBMERSIBLE W/ LICENSE LIGHT
- LED Stop/Turn/Tail & Side Marker Light Rectangular, Submersible with License Light 4.84"X4.76", red, Viz Pack
- Product Attributes:
- Container Type: Viz Pack
- Bulb Technology: Led
- Lens Color: Red
- W/ License Light: Y
- Shape: Square
- Integral Reflex: Y
- California Prop65 Required: Y
- Light Color: Red
- Bulb/Diode Count: 15
- Maximum Voltage: 16
- Mounting Type: Stud
- termination: Stripped Wire
- Multi-Volt: N
- Regulatory Compliance: Dot
- Submersible: Y
- Mounting Centers: 2
-
Features:
- 11 diodes (840) or 15 diodes (840L).
- Available in retail-friendly Viz Pack.
- Hardwired design.
- Recommended for marine trailer use.
- Integral Reflex.
- Combination LED stop, turn and tail light.
- Solid state construction—no bulbs to break or burn out.
- Fully sealed, submersible construction.
- Potted circuitry protects against moisture, corrosion, and vibration.
- Lower amp draw than incandescent lights.
- Designed to directly replace 440-series incandescent lights.
- M840L roadside light includes license light.
- Integral, dedicated side marker.
- Exceeds all DOT rear lighting and reflex requirements for trailers less than 80" wide.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This Part Fits the Following OEM/Substitute Numbers:
283006, 5056D, 51972-5
This item is not specific to any vehicle. Click here to learn more
- Trailer Light Kit
- CURT 53540 Replacement Trailer Light Kit; Combination Lamps; Side Markers; Wiring
-
Features:
- Designed To Replace All Necessary Lights On Most Trailers
- Lights Function As Tail Lights Brake Lights And Turn Signals
- Features A Molded Housing w/Standard Red Lenses
- 20 ft. Wiring Harness Accommodates Most Trailers
- Phosphor-Bronze Contacts For Good Connection In Extreme Condition
- Bolt-On Mounting System For Secure Installation On The Trailer
- Easily Connects To Any Standard Automobile Lighting System
- Frame Mounting Clips Keep Wires Contained And Protected
- Phosphor-Bronze Contact For Good Connection In Extreme Conditions
- Ideal For Trailers Up To 80 In. Wide
- Exceeds Dot Highway Standards
- Made In USA
- Trailer lights can be fragile, but they are completely necessary for towing. Whether youre a contractor on your way to the jobsite or just a casual fisherman heading to the boat landing, you need working trailer lights to tow safely and legally. For any towing setup, CURT offers quality, DOT-approved trailer lighting, including complete wiring kits, combination lights and replacement lighting components. The CURT universal trailer light kit includes everything you need to properly equip your trailer with towing lights. It includes two combination lights, two side marker lights, 20 of color-coded wiring, wire connectors and frame mounting clips for a complete installation. This kit also comes with a license plate relocation bracket to reposition the license plate on your trailer as needed. The combination lights in this kit feature a molded housing and lenses to protect the internal components, and they use phosphor-bronze contacts to maintain a solid electrical connection to your vehicle. This universal trailer light wiring kit accommodates most trailers up to 80 in. wide and 20 long. It is especially designed for boat trailers and utility trailers. It comes with a 4-way flat connector to easily and securely plug into your vehicles towing electrical socket, and for safety, it exceeds all DOT highway standards.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Combination Driver-Side Trailer Light with License Plate Illumination
- CURT 53441 Driver-Side Combination Replacement Trailer Light; Stop Tail Turn
-
Features:
- Designed To Replace Rear Trailer Lights On Most Trailers
- Functions As A Taillight Brake Light Turn Signal Illuminator
- Two Extra Connections Provide Hookups For Other Lights
- Features A Molded Housing w/Standard Red Lenses
- Phosphor-Bronze Contacts For Good Connection In Extreme Condition
- Bolt-On Mounting System For Secure Installation On The Trailer
- Exceeds Dot Requirements For Reflectors And Markers
- Made In USA
- Phosphor-Bronze Contact For Good Connection In Extreme Conditions
- Trailer lights can be fragile, but they are completely necessary for towing. Whether youre a contractor on your way to the jobsite or just a casual fisherman heading to the boat landing, you need working trailer lights to tow safely and legally. For any towing setup, CURT offers quality, DOT-approved trailer lighting, including complete wiring kits, combination lights and replacement lighting components. This CURT combination light is designed to be a driver-side trailer light. It features a molded housing and molded lenses to protect the internal components from the elements, and it uses phosphor-bronze contacts to maintain a solid electrical connection to your vehicle. This taillight comes with red lenses and two extra connection points to provide hookups for other lighting fixtures. It easily and securely mounts with the included hardware and features an additional light for license plate illumination.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
- Stop/Tail/Turn Light Bar
- Stop/Tail/Turn Light Bar; LED; 12 V; 0.2 Amps; Low Profile; Polycarbonate Housing; with Chrome Bezel; Mounted Vertically or Horizontally;
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dehp; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
-
Features:
- Stop/Tail/Turn Light Bar
- The LED stop/tail/turn light bar is designed to conform to applicable US FMVSS 108 and Canadian CMVSS safety standards and is meant for use on trailers over 80 in. wide. The light bar contains 9 high-output LEDs for exceptional brightness and performance. The life of a LED light far exceeds traditional incandescent lights and draws significantly less power than traditional halogen bulbs. The LEDs are surrounded by tough polycarbonate housing and is water and vibration resistant- perfect for cargo trailers. Package includes light bar and chrome bezel for easy installation.
-
Fitment Warning:
- This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
This item is not specific to any vehicle. Click here to learn more
Showing 1 - 10 of 35 products
Loading...