Vehicle
Vehicle
The Smart WAY to Buy Auto Parts Online!
About us
Feedback
Retrieve Quote
usa ca
Menu
Feedback Retrieve Quote
Account 0 Cart Garage
Phone: (800) 594-0237 CA
Select a vehicle to find exact fit parts
Back to vehicles list
Hello, Log In My Account
0 Shopping Cart $0.00

2006 Lincoln Navigator Oxygen Sensor - Upstream 8 Cyl 5.4L Bosch

4 on 125 ratings
  • Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2006 Lincoln Navigator V - Upstream 8 Cyl 5.4L 330
2 In Stock
Best Price:

$90.09 USD
$108.11 USD
Brand Bosch
Part # B4115664
Condition New
Warehouse B
Bosch

Navigator Bosch Oxygen Sensor 15664 2006 Lincoln
  • Bosch Oxygen Sensor
  • Actual OE Oxygen Sensor
    • As one of the largest North American automotive suppliers, Bosch develops, manufactures and supplies precision components and systems - including body electronics, chassis and powertrain products - for vehicle manufacturers worldwide. Since its foundation 1886, the company accelerates the progress of Automotive Technology with continued innovations.

    Bosch is a globally recognized company that manufacture's tools, parts, and equipment in a wide variety of industries and is respected for their quality and innovation many times over, especially in the automotive industry, both as an Original Equipment Manufacturer and aftermarket manufacture. Bosch produces some of the best auto parts in the following categories; gasoline fuel pump and delivery systems, diesel fuel pump and ignition, chassis system controls, electric motors, starters and alternators, all sorts of automotive electronics and sensors, steering systems, and more!

    Packaging

    bar code
    028851156646
    package quantity
    1
    length
    2.20 in
    width
    1.97 in
    height
    5.83 in
    weight
    0.25 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
    1. jam
      04 May, 2015
      i installed this and the 15717 on a 99 2.5L4 (5 speed) ford ranger. after the first tankful, it appeared that my mileage increased approx 5-8%, with the second tank showing a bit less. there was no 'check engine' light before or after. there are approx 175K miles on the vehicle, and i'm guessing the old ones were original.i used the parts selection page at bosch to confirm the part numbers: boschautoparts.com/auto/oxygen-sensors/premium-oxygen-sensors - hopefully, AutoPartsWAY won't blot out the link here.lately, i've noticed some missing at highway speed, but i think the computer has adjusted the fuel/air to a (more) optimal ratio, and plug/plug wire issues are more significant now. i plan to replace both shortly and will update after testing.one thing to note is that the threads in the exahust were pretty rusty and removal/installation was pretty difficult. i used an 18mm-1.5 tap to chase the threads, applied anti-seize and re-installed. be careful to...
    2. Sonya "Sonya Ann"
      19 Apr, 2015
      This is an excellent replacement for the original part. It came well packaged with a small amount of special anti-sieze for the threads. I knew it was the right rear sensor on the Jeep (after my brother ran his diagnostic machine on the OBDI port) and looked all over the exhaust system until I finally found the located on the exhaust right near the back of the engine. I had expected it to be farther to the rear in the exhaust system. LoL.I was able to just jack up the right front of the car, disconnect the wire from the old sensor, unscrew the sensor with a regular 8" crescent wrench, apply the anti-sieze to the threads, screw the new sensor in, tightening it with the crescent wrench and connecting the wire connection. It fit like a charm. The special connector was exactly like the original and there were NO problems!This has been in my 2002 Jeep Grand Cherokee for over 3 months now and is working correctly. Perfect easy fix for a great price. I...
    3. RGarcia.
      15 Apr, 2015
      Sensor worked well car running good with no issues
    4. DJRAMBO954
      25 Mar, 2015
      I was completely satisfied with my purchase and will be purchasing more products from AutoPartsWAY, it's the best website for purchasing parts for your vehicles.This O2 sensor was an exact fit. Came out easy, went in easy. This sensor was half the price of Advanced Auto AND Auto Zone.
    5. Turbo "dork"
      15 Mar, 2015
      No problems after a couple years. Sold the car since.
    6. Brian S.
      14 Mar, 2015
      Fit perfect in my 2000 Nissan Maxima SE (CA version).Was fairly difficult to get the old one out, but after a few days of PB Blaster soaking, it finally came out.Unfortunately, the reason I replaced the sensor was to take care of P0430, but it didn't work. (I knew it probably wouldn't but figured I spend $40 first before spending $200+ on a new precat).FYI - this is for bank 2 sensor 2replaces red wire sensor (this one has a black wire)
    7. Mack
      13 Mar, 2015
      Thanks
    8. DONO
      15 Feb, 2015
      perfect fit...easy install
    9. Roberto
      14 Feb, 2015
      Perfecto... Works well and cheaper than autoparts
    10. K. Atwell "SmartGirl250k"
      04 Jan, 2015
      My mechanic just installed this for $54. It was perfect. I saved at least $100 because I had a $15 coupon on the labor. No more check engine light issues. Excellent product! I highly recommend that you buy this and just pay for the cheapest installation that you can find. Why get ripped off?
    11. jeffandchell
      26 Dec, 2014
      O2 sensors are a bugger to replace. That said, this item is as described. Delivered on time and with no issues. If you have to replace one, this is an economical replacement.
    12. Mike
      18 Dec, 2014
      Installation quick & easy. No Codes. I assume it working like it should.
    13. hegon
      08 Dec, 2014
      =)
    14. AutoPartsWAY Customer
      04 Nov, 2014
      Fixed the code. Dealer wanted some $275+. Fixed it with less than $100 sensor..
    15. Brad A. Barton
      28 Oct, 2014
      I originally bought the Bosch 15703 for my 2000 Chevy K3500 pickup since the site said that one would fit. If I'd have scrolled down further I'd have found this one that said it fit as well. the 15703 did not fit so I had to return it and order this one. This one fit and seems to have fixed my promble. Compared the price at my local autoparts stores and this part is identical to what they sell but for far less. Thanks AutoPartsWAY!
    16. David W. Davis
      08 Oct, 2014
      Perfect fit,,fast delivery
    17. RuNuts
      13 Sep, 2014
      I used this to replace the one wire O2 sensor that I installed during a carb to EFI/TBI conversion. The one wire would fall out of closed loop and take too long to go into closed loop. This goes into closed loop quickly and according to the scan software, is working perfect.I tapped in to the fuel pump wire to drive another relay that powers the heater wires (two white wires - one ground and the other hot). This prevents the O2 sensor from going hot with the ignition in the on position, but engine off.
    18. partspharm
      10 Sep, 2014
      I was in the import car parts biz for over 30 years and this Bosch Oxy Sensors is the original factory for my Nissan Frontier as my truck still had the original sensor in it since new. The one I took out was made by Bosch not NGK/NTK or Denso and replacement was easy
    19. Kidflyr
      01 Sep, 2014
      The Bosch #13942 Oxygen Sensor fit my wife's 1990 Taurus with 3.0L Vulcan V6. With the new sensor, the car has a smoother idle than with the 24 years 115,000+ miles old original oxygen sensor. The anti-seize coating pre-applied to the threads was a nice touch, one less step for me to perform during installation. The price was low enough that I felt it was worthwhile to do as part of a high-mileage tune-up at home, and I'm satisfied with the new Bosch sensor.
    20. ben dover
      30 Aug, 2014
      outstanding product, at half the price of the local auto parts shops! fit perfect, and had more than enough wire-lead!
    21. Alcides Duran "Al"
      29 Aug, 2014
      Fit perfect in my car
    22. JOHN P TROMBLY
      23 Aug, 2014
      Fits perfectly in our 2002 Chevy Cavalier. This O2 sensor has a factory plug on it for a direct fit.
    23. M. Austin
      10 Aug, 2014
      Perfect fit for a 2000 Chevy Cavalier. The old one was very difficult to remove because it was seized in there. The new one fit just fine and the connector snapped right in without a hitch.
    24. AutoPartsWAY Customer
      08 Aug, 2014
      100% happy
    25. Abraham G.
      05 Aug, 2014
      This product was great just like I expected. Very quick delivery and the price was excellent I recommend this item to anyone.
    26. T-n-T Handywork
      08 Jul, 2014
      Fit fine on 2002 Jeep Grand Cherokee. This unit replaced the passenger side rear sensor and cleared my error code. No modification to the wiring was needed.
    27. Alex
      08 Jul, 2014
      Fit my truck like it was supposed to. Hardest part of installation was getting the old one off. After 2 days the check engine light went off, I didn't even need to go in and clear the code. It's been a month and the light is still off so the sensor must still be working! Saved over $20 by buying it on AutoPartsWAY instead of my local part store. The part store was offering the same part with the same brand so that means this isn't a cheap knock off part like I suspected it might be. Arrived 2 days before estimated shipping date. Very pleased
    28. Simone Fat Cat
      03 Jul, 2014
      Replacing my sensor took care of the check engine light and improved the gas mileage on my '95 Wrangler 4 cyl, 5 speed from 10 to 15! Exhaust now smells much better too!I used "Powerbuilt 648691 Oxygen Sensor Offset Puller" tool to remove and reinstall, I started soaking the old sensor with WD40 a few days ahead of time, came out without too much argument.Good luck, SFC
    29. Papatango
      25 Jun, 2014
      If you're a DIYer like me, this can save a ton of $$$ doing this repair by yourself! It's simple to do if you have the right equipment to do it. Get a O2 Cesnsor socket for under $20 on line or at your local automotive store and the original comes right off and the new ones go right on with the perfect fit as the originals. Already had sealant on the threads so that was a nice surprise!
    30. Happy Family
      19 Jun, 2014
      Unbelievably enough, it fits and (as far as I know even though I didn't do the extended sniff test from the tailpipe to make sure) I believe it works as it should. There's not much else to say...
    31. Victor
      02 Jun, 2014
      This is the second Bosch O2 sensor I've used. Both fit perfectly and the emissions at the tail pipe on both cars improved after their installation. They build a fine sensor, possibly the best.
    32. nrs.rjg1
      19 May, 2014
      This is a DOWNSTREAM EXACT FIT O2 Sensor for a 2007 KIA SPECTRA EX 2.0L.I don't regret buying it. This is Part # 13461 BOSCH Brand from advance auto parts. The price was not the cheapest available online and in-store, but I found the cheapest upstream sensor on AutoPartsWAY. So I purchased both at the same time.If you are looking for the UPSTREAM sensor get the BRAND: NTK Part # 24353 this is the same as advance auto parts. I went crazy looking for the upstream one. Because I needed the 5-wire not 3 or 4 that they usually come in.I just changed these sensors this passed weekend.
    33. Amontoya
      05 May, 2014
      Original for my 1999 Nissan Frontier, 2.4L, KA24DE engine. Delete the old and place the new and ready, nothing else to do ...
    34. joe
      03 May, 2014
      this is a brand new bosch o2 sensor, it fits properly and works properly. also the price is unbeatable! you could literately buy two of these for the price of the same exact one from an auto parts store!
    35. Tom Rommelmann
      11 Apr, 2014
      Fast delivery, sensor fit and worked perfectly. Thanks Why on Earth do they now require twelve more words before they accept my post?
    36. SillyGod
      08 Apr, 2014
      Worked perfectly in my Saturn. No more Service code! This thing popped in about 2-minutes, once I broke loose the old one, which was a bear!
    37. Bob Johnson "Jack"
      17 Mar, 2014
      A truckA rough-running truckA mysterious misfirePlug in the scanner, check the live feedA lethargic O2 sensor on the right bank.Like tortoise and hare, night and dayChecked auto parts stores, oh what a mess!Some out of stock, some wanting more than I care to sayTook down the part number, and came here for half price.Out with the old, in with the new.Problem still not gone, but a tad better now.And the sensors? Their voltage changing rapidlyLike two happy hares!
    38. robert baxter
      04 Mar, 2014
      Easy and convient way to order parts. The price was good on both parts that I could tell even with the cost of shipping and handling!
    39. Michael Goldfield
      22 Feb, 2014
      This was a great choice: perfect fit and perfect results..As soon as I replaced the O2 sensor on my 2003 New Beetle GLS, the codes cleared and the check engine light went off.I'm looking forward to seeing an improvement in my gas mileage.*** Update *** February 28, 2014Used a full tank of gas. My usual 20 miles per gallon jumped to 23.7 MPG. I was more than delighted.Doing the math, my cost per mile for gas dropped from 18.8 cents per mile to 15.8. That's a 16% reduction in gasoline cost.Added benefit: my Beetle drives like it has been supercharged.
    40. Deadeye
      06 Feb, 2014
      The check engine light on my 2005 F150 FX4 came on awhile back. I scanned the PCM and got a P0059 code, HO2S Heater Resistance (Bank 2, Sensor 1). I performed the diagnotics suggested and narrowed it down to the O2 sensor. At AutoPartsWAY I saved $20 over the local auto parts stores, and had the part in no time. Note the Bosch O2 sensor has anti seize preapplied to the threads, so it's ready to go.
    41. AutoPartsWAY Customer
      18 Jan, 2014
      Nothing required for 2004 Gold 2.0. Direct fit no problemsCodes cleared all works. Thank you very much for this great part.
    42. Codi L Brooks
      06 Jan, 2014
      This was installed on a 2002 1500 Chevy Silverado and it went in like a charm. The sensor is recording as it should (I have a computer to read it as the car is running) and my MPG has increased since installing the new sensor. No problems would recommend
    43. AZ
      30 Dec, 2013
      Installation was a snap. It fit a 2004 Chevy Cavalier perfectly. No soldering of wires required for installation. Definitely recommend.
    44. Joe
      20 Dec, 2013
      I replaced the old upstream ACDELCO oxygen sensor from the exhaust manifold of my Chevy Colorado 3.5L with this one, and it works as advertised. It comes with a small pouch of copper anti-seize for the threads.
    45. michael p downing
      06 Dec, 2013
      worked perfectly it was good replacement on my 07 jeep wrangler. alot cheeper than autozone and the exact same part.
    46. 97wrangler
      24 Nov, 2013
      I put this in my 97 wrangler it works great. The only problem was that the connection did not fit so I had to cut the wires and connect them to the old connector. Not sure why mine didn't fit since others didn't seem to have that problem. My Jeep definitely runs better now.
    47. Bwade
      15 Nov, 2013
      Installed the O2 sensors months ago, but waited to write a review until some time passed to ensure the sensors were working correctly. Installation was fast (less than 5 minutes) and I can report that the sensors are performing as designed. No more codes and improved performance.
    48. Jeff Olson
      13 Nov, 2013
      It fit as specified. Installation only took a few minutes for the top side sensor. The bottom seonsor was just as easy even though I was laying on the ground. Plug in side matched what my car had from the factory units (Accent, 2001). My check engine light went off as soon as I replaced these and my exhaust manifold and. The light has yet to come back on and I have been driving around for a month or more.
    49. Blowout
      14 Oct, 2013
      easy to install the front sensors. The electrical connector was a pita to get inserted into the vehicle side. It looked like the keying feature on the Bosch side wasn't cut as deep as the OEM O2 sensor plug. Just had to push harder than you would expect. Also bought the Lisle 12100 socket to install.
    50. DarkGalXE
      05 Oct, 2013
      Perfect fit upstream O2 sensor for a Dodge Stratus ES 1997 V6 2.5L.The trouble code I was getting from my OBDII scanner was "P0134 - O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1)." My car would randomly stall while idle or driving slow. Occasionally, while driving fast, I could tell that it was trying to stall.After replacing the O2 sensor, the car stalled about four time within five minutes of slow driving. My mechanic said the PCM was adjusting to the new data from the sensor and the car might not work as expected for a little while. We drove it for another five minutes at a slow speed and the car wouldn't stall. At that point, I took the car home, which was a 40 mile drive, lasting over an hour. The car did not stall once. It actually felt like it had a bit more power than before. I'm hoping the problem is fixed, so I'm leaving a 5-star rating for now.By the way... if you have the same car as I do (V6), good luck getting to the...
    51. Eduardo
      24 Sep, 2013
      it was packaged very good and its just like they mentioned on the list. i plugged it in and was a perfect fitment
    52. AutoPartsWAY Customer "Foodie"
      20 Sep, 2013
      Bought this for an engine code on a 2001 Jeep Wrangler (P0432, catalyst) fixed my problem. I'd definitely buy it again.
    53. Chris
      11 Sep, 2013
      Works and fits perfectly.......fixed my check engine light at half cost.in retail packaging Fast shipping. would but again if i have to
    54. Bullet32
      06 Sep, 2013
      I've been running a little rich for a awhile. XJ would run, just not "holy cow, this is awesome". Noticed a better acceleration curve immediately. One tip: properly reset the PCM. Two later, I did a proper reset, and I picked up even more performance/ smoothness.Disconnect the battery terminals and touch them together for 30 seconds. (This is to discharge the PCM capacitors, which maintain the Adaptive Memory.)Reconnect the Battery CablesTurn Ignition Switch to the “On” position but DO NOT start the engineTurn Headlight “On”Turn Headlights “Off”Turn Ignition Key “Off”That's all there is to the PCM reset.
    55. Agust
      14 Aug, 2013
      My 96 Saturn was running a bit rough and the check engine light was on so after a mechanic changed the oil and plugs he only cleared the light. So needless to say it came back on. I decided to buy this sensor through AutoPartsWAY and after taking off the old one and replacing it with the new Bosch the light turned off and the vehicle runs much better.
    56. Martin A. Lopez "tinotoughguy"
      14 Jul, 2013
      Part arrived on time. Item was packaged very well. I would highly recommend the seller.It took me 10 minutes to swap out the front oxy sensor on my 2003 Galant ES. Once replaced, I cleared the check engine light with my OBDII code reader and it hasnt shown up since.
    57. mnmike
      13 Jul, 2013
      I would suggest always buying the OEM compatible sensors, not the universals. This sensor fit perfectly and the wiring harness matched my '97 Saturn SL1. No need to splice any wiring.
    58. JS
      25 May, 2013
      Bought a couple for my 2001 VW Jetta. The only complaint I have is that the O2 sensors are on top of the catalytic converter instead of the side like other German manufacturers (ex. BMW), but that's VW's fault, not Bosch's. Cleared the engine codes after installation and 200 miles later they still haven't returned. Ordering them online was much cheaper than the $200 per sensor the shops and dealer quoted me.I also bought an oxygen sensor offset puller (Powerbuilt 648691) because that was the only way I could get a socket around them. Even then, laying under my car made for a tough angle to apply enough torque to break them loose.
    59. Tarzan
      26 Apr, 2013
      Installed this for an 03 Mitsubishi Galant. Autozone wanted $70 for some no brand one. Same as OEM and no fitment issues. Took 5 minutes to replace. Dash light now gone.
    60. Ashley
      23 Apr, 2013
      Some people say Bosch is not good quality. I have used their products for several different parts and have never had any problems. So far this oxygen sensor has worked exactly how it's suppose too. Only time will tell it's true quality.
    61. Byron Carmon
      06 Apr, 2013
      After borrowing the correct wrench and a few youtube videos, easy way to DIY and save money - now going to order the sensor for the back side to complete the tune up.
    62. gmtech
      06 Apr, 2013
      I was a little worried that this non-oem part would live up to the spec of the original, but boy was I wrong. I installed the sensor, cleared the fault code and its been performing like a charm ever since.
    63. GREG
      25 Mar, 2013
      Now-a-days, most vehicles come with at least two O'2 sensors. One is a "high voltage", usually before the catalytic converter and a "low voltage" after. If you get the wrong voltage then it will create a new "check engine code". I suspect the O'2 sensor you took out was a "high voltage" and replaced with a "low voltage", or vica-versa.
    64. matthew
      20 Mar, 2013
      Fit perfect on my 97 Cherokee XJ. This the exact fit model with the universal also available. Saved thirty dollars!
    65. M. Galyean
      20 Mar, 2013
      Not much to say. Has been working fine for a couple of months now. It was very nice that the OEM connector is all part of the deal as you really don't want to have splices down under the vehicle in the mud, salt, water, and temperature fluctuations if you don't have to.
    66. Chris Butts
      12 Mar, 2013
      There's not a whole lot you can say about an o2 sensor. I have yet to see if my gas mileage has improved but by replacing this, it did clear the engine code I was getting and causing my truck to run like crap. If you have an older vehicle like I do, you might have to take your vehicle to a shop to have them put this in. Unless you have the tools. The guy at the repair shop have to cut my old one out because these things get nearly welded to your exhaust manifold over the years.
    67. Stephen Mathias
      21 Feb, 2013
      Between this, the Walker Exhaust 15684 Standard Domestic Converter, and Dynomax 17450 Exhaust System, check engine light went away and truck runs twice as well and gets better gas mileage (plus doesn't stink up cab)
    68. p deaton
      19 Feb, 2013
      This product was great,no issues with install, it was all it should be.Would get all my future products here.Be Blessed!
    69. Paul T.
      17 Feb, 2013
      Our engine started tripping a P0032 fault code indicating a problem with the upstream O2 sensor. After installing the Bosch 15122 Oxygen Sensor, OE Type Fitment the engine light cleared.I'd recommend picking up the Lisle 12100 Oxygen Sensor Socket to assist with getting the old O2 sensor off. You will also probably need to use a fair amount of WD-40 on the old sensor, depending on how bad it is rusted on to the back of the engine. A wobble extension, a breaker bar, and some old-fashioned elbow grease will also make the task easier. If the parts are quite rusty, make sure that you are using good quality tools (chrome vanadium) otherwise you will destroy your sockets/wrenches.
    70. Marc R. Baril
      09 Feb, 2013
      This is identical to the OEM Bosch component installed in the 1997 Subaru Outback. The connector is for the rear catalytic converter in the exhaust system.
    71. Gil
      04 Feb, 2013
      Got an engine check. Replaced with this item and the light is gone. Didn't do anything else...it cured by itself.
    72. G. Hall "gregh"
      14 Jan, 2013
      I replaced both 02 sensors. My caty still was failing or maybe it failed after the 02. I don't know. All I know is the light didn't go off until I got the caty replaced. Never the less works great and no more light!
    73. Tim
      13 Jan, 2013
      The sensor fit in well with no issues attaching harness. The harness on this one is a bit longer than the original which is actually a plus because the original is a bit of a stretch - just be sure to move any slack away from the exhaust on this one.Since installing, I went from 9 mpg to 15 mpg so the one that I replaced was obviously shot. Also, the exhaust is not as rich anymore, especially after the vehicle warms up.For the install, I used a 21 mm O2 sensor socket to break the old one loose after warming the outside of the exhaust pipe near the sensor with a propane torch. To unscrew it the rest of the way, I used an adjustable wrench. The whole process took 15 min, including getting up for tools, positioning shop lights, etc.
    74. Vincent
      09 Jan, 2013
      I gave this Oxygen sensor 5 stars because of Bosch quialty.I had the orignal on my 1994 GMC truck that needed to be replaced.The price was very reasonable much cheaper then after market auto stores and dealerships .I recommend Bosch products to all my family and friends.
    75. Bernard Melus
      01 Jan, 2013
      Excellent product, same as sold by Mercedes dealerships. 10 minut DIY installation on ML320 with all four same oxygen sensors.
    76. S. Somerville "somerville99"
      30 Dec, 2012
      installed two new sensors although only one was bad. very good price, easy to install. Fit my 99 e320 with no problems. All good.
    77. Ken Wilkinson
      04 Dec, 2012
      Got the same error code after replacement - returned the item... Turned out the computer in the car was bad (ECM). Think this was a good part and a good deal. The computer replacement was not so much a good deal $700+ from the dealer! The dealer would not diagnose the computer issues with an after market O2 sensor possibly throwing a code - so I was forced to overpay to get one through them - turns out it was not the problem...
    78. Richard D. Eichelberger
      17 Nov, 2012
      2001 Subaru Impreza 2.5RS, fault code P0136. This little baby fixed her right up. Well packaged, fast delivery, no worries.One thing to note- the Oxygen Sensor socket tool that is recommended by some other reviewers will not work on (at least) my model of Impreza. Due to the angle of the sensor, and proximity to the body, there's not enough clearance to use the socket. I went to a local auto parts store to buy an "open" type tool, but they had an O2 tool kit that you can check out for free, just give a deposit, and receive a full refund when you return it. Worked out just fine.
    79. A. Soto
      26 Sep, 2012
      Anecdotally, O2 sensors can 'go bad' with no Check Engine lights on Cherokees. Poor gas mileage is a symptom. Used this to replace the upstream (before the catalytic converter) O2 sensor for my 1996 Jeep Cherokee. So far it's really improved my gas mileage.It was a direct replacement, no problems installing it.
    80. KCATP
      16 Aug, 2012
      when I purchased my 1996 grand cherokee 4.0 the check engine light was on because there wasn't an oxygen sensor so I purchased this oxygen sensor (much cheaper than the parts stores). It came with anti-seize already on the threads so all I had to do was remove the plug in the catalytic converter, screw this in, plug the connector in and cleared the engine codes (i did this by removing the neg cable for 5-10 mins). No more check engine light. Works great!
    81. akruck
      06 Aug, 2012
      Very quick service, and the new sensor put out the check engine light. Fuel economy improved. Vehicle stopped putting out black smoke.
    82. Calvin
      15 Jul, 2012
      My Ls1 trans am had a Service engine light and a misfire not long after installing headers. The regular bosch o2 sensor did nothing for me. As soon as I installed this corvette sensor the light went out and the misfire is gone and I no longer need the extensions. Recommend these for f-bodys with long tube headers.
    83. S. Spinner "oldolds442"
      05 Jun, 2012
      What can i say about an oxygen sensor?It is a Bosch product and it fits like oem, probably was oem. Works fine after the initial fire up, when it stumbled a little while the system relearned the parameters. I replaced all three of them and runs very well. will see if gas mileage goes up. Replaced at 150K miles, just because of age..
    84. MIFLYBoy
      15 May, 2012
      What more can be said. This is a direct replacement product without the high retail price from your local store. Connections were a match and high quality.
    85. Careful shopper
      16 Mar, 2012
      Perfect fit in down pipe, no mods needed... working just fine and a real cost saver over local parts store.Now and then there are problems with parts on this 1999 Jeep Cherokee XJ, it's an early build and has some 1998 parts used as I find out the hard way... this fits fine I'm happy to say.Fast, low cost shipping from AD Automotive
    86. Cole
      09 Mar, 2012
      I was driving with a check engine light on and had very poor gas mileage. Had a mechanic read the engine code and found out it was a failed oxygen sensor. The auto parts chain store wanted $90 for this same sensor which is a steep difference between AutoPartsWAY.I had never installed a oxygen sensor before so I wasn't sure what to expect. I do most of my own auto repair work but I'm not a professional. But installation is very simple and can be done by anyone with half an hour of free time. If you have an oxygen sensor removal tool its very simple but there is a way around it. With a hammer break off the old housing, this will leave a perfect 6 point hex to ratchet out of the exhaust pipe. After its out the Bosch one will simply wrench into the existing hole.It's such a simple job and many mechanics will go over the top (my mechanic said he'd do it for $200, but warned me after we agreed on a price that sometimes the sensor "breaks" it becomes a five hour job). So if...
    87. SMRY
      09 Mar, 2012
      My Car: (S) Model, 2002 Subaru ForesterCheck Engine Light: OnTrouble Code: P0136 O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)Tools Used: Code Reader, Tire Ramps, Pc Of Cardboard, Can Of Penetrating Oil, 7/8th wrench (In That Order)Part From AutoPartsWAY: (Note Rear Sensor): Bosch 13469 Oxygen Sensor (OE Type Fitment)Installation Time: 20 MinutesAutoPartsWAY packed & shipped very fast, part was an exact fit (AutoPartsWAY 5 Stars)This sensor is very easy to get to & replace just behind the 2nd cat converter1 Let the penetrating oil do its thing whiles gathering your tools2 Unplug the sensor (just ahead of the crossmember)3 Pass the sensor cable thru the closed end of wrench til you reach the sensor itself with a quik tug on the wrench, break the sensor free & unscrew from its mounting boss4 Install new sensor by hand then tighten with wrench5 Clear code with reader6 Best Part: (Feel Great) knowing you've done...
    88. S. Czar "Czar Mom"
      30 Dec, 2011
      No problems here...Excellent part. Installed and works perfectly with no issues. Genuine part with excellent packaging and no damage in transit. Bosch excellence as well.Well worth buying online...saved us a ton of money.
    89. Kris "Mountain Wizard"
      28 Nov, 2011
      Factory OEM part.Cable was perfect length, worked perfect out of the box.My car was running pretty good with 136,000 miles and no Check engine light or codes.Yet a friend of mine's car with 100,000 miles had a problem and when they replaced the o2 sensors the car ran much better. So I decided with the mileage I had to replace the o2 sensors, my car has 2 of them. I was correct that they were working OK yet with new ones my car runs better with more power.If you think about what these do and where they are, in the exhaust stream, it does make sense that they would become coated, they were, and less efficient as the miles roll up. So from now on I will replace them every 100,000 miles.I figure with price of fuel what it is and where it is going even a small improvement in fuel mileage is worth pursuing. So with my car running a little bit smoother with the feeling of more power I am happy with my choice.I had looked...
    90. StevenL
      15 Nov, 2011
      I was experiencing an occasional "service engine soon" light on my dash. The dash light would come on and stay on for a few hundred miles to sometimes over 2000 miles. It eventually would go out only to return once more. The computer was registering a P0420 code which means that something is not right with the emissions system. After a lot of internet reading I decided to replace both the front and rear oxygen sensors. The rear sensor - this one - was very easy to reach. It did require an acetylene torch to remove the old part. It was heavily corroded. Installation of the new part was very easy. I have not seen the "service engine soon" light since both oxygen sensors were replaced. The Bosch replacement parts looked exactly the same as the original equipment that I removed from the exhaust system.A word of caution. A P0420 code can also mean that the catalytic converter needs to be replaced. I took a chance and replaced both oxygen sensors since the car had...
    91. Flashman
      09 Nov, 2011
      My local parts store wanted more for one of these than I paid for two of them from AutoPartsWAY and that includes shipping. Worse yet, the parts store wanted to sell me their store brand universal type that require you to splice on your old connector. These Bosch sensors are higher quality and come with the proper OE dongle attached. They have anti-seize thread compound already applied to the threads but be careful when you take the protective caps off. You don't want to get any of that compound on the sensor itself. I've had very good luck with Bosch products in the past and this is no exception. High quality parts at a great price and fast AutoPartsWAY shipping gets five stars.
    92. Tammy
      03 Nov, 2011
      Good O2 sensor, the only bad thing i could say about it was the threads seem a little...short...i guess is the only word i can think of. You had to really push hard on it to get it to start to thread in.Other than that, it has kept the check engine light from coming on for months now.
    93. William H. Ryder "mechanic"
      14 Oct, 2011
      this sensor was perfect it was a great price car passed inspection bosch makes a great 02 senser it was cheaper than autozone
    94. boog9104
      11 Oct, 2011
      Needed new 02 sensor for my 96 lhs and I looked at all of the local part stores but they were charging 50+ for one, logged on to AutoPartsWAY found what i need ordered it opened it up and it looked super short but it fit my vehicle just right.
    95. Fredzilla
      17 Sep, 2011
      My local Saturn dealer tried to charge me $625 to install 2 of these. Oh well, I guess it is that new streamlined user experience that was supposed to be their hallmark. I paid $140 here. Because the exhaust manifold is stainless steel, these do not get stuck. Be ware of generic 5wire sensors on EBAY, they will not work for this application. There is a special chip in the connector that is matched to this version of the sensor. you cannot just clip the wires and splice something in.
    96. LH
      26 Jul, 2011
      I was very satisfied with the Bosch O2 sensors I got. They came with anti seize paste on the threads which is a big plus. After replacement car ran much better and gas mileage improved quite a bit. If I knew they were such a great price I would have replaced them sooner. If you are going to replace them on a Taurus vulcan engine get a O2 socket from one of the auto parts stores that loans tools as the firewall bank sensor is very tough to access. LH
    97. woodsman56
      17 Jul, 2011
      I ordered two of these to replace the existing O2 sensors in my Ford Explorer. They were a direct fit and immediately increased my mileage by 2 MPG! These sensors are a great product at a great price!
    98. LTandMR
      28 Jun, 2011
      Got this for my Vulcan 3.0! It is all around the correct part, albeit that the wires are a half inch too short. Which might not be a bad thing! Since too long of a wire near your exhaust is asking for trouble(I don't know how long the sensor with longer wire is) I just popped the stock wire holder out of the chassis(to get the extra 1/2") and used a couple ziptys to hold it instead!I always thread the sensor in first and get the factory applied antisieze into the threads and then add a bit more of my own. I keep my cars along time, so a bit extra makes the next time easier on a semi rusted exhaust!
    99. JJ "Jon James"
      24 Mar, 2011
      I selected the Bosch O2 sensor for my Ranger because of the Bosch name and because it was the only other brand which had a tip which looked just like the Motorcraft. Once I removed the old one (using the OEM socket set) I was able to confirm that the sensor tip was identical to the one from Ford. Although the original one was 9 years old and had 139,000 miles it had not set a code but apparently it had become lazy or contaminated as I had some driveability issues and the exhaust tip was sooty. My Ranger now gets better gas mileage by 1-2 mpg and the engine response/smoothness has greatly improved. With gas being $4 per gallon I kick myself for not changing it sooner!
    100. C. Gritt
      09 Mar, 2011
      This sensor replaced my stock sensor on my 99 dodge ram 1500 with the 3.9L. Replaces the one after the cat. Looks to be stronger and more well built than the oem sensor it replaced. Plus it's made in America. Gotta support the middle class. It works great. The only downside is I paid way more for it at an auto parts store. AutoPartsWAY has it for way cheaper than I paid.
    101. J. Elsass
      06 Feb, 2011
      I just received these oxygen sensors and these appear to be the OEM replacement part. These were about $25 cheaper than anyone else, they came in 2 days and I just installed them this morning in a 2000 BMW E46 323ci and noticed a big difference in MPG and the car seemed a little quicker as well. My car has 126,000 and was overdue for these - the original sensors were definitely worn. These are the pre-cat sensors by the way - E46's need post-cats as well
    102. Avery_Mark
      05 Feb, 2011
      When I saw my check engine light come on I was pretty scared because thats always expensive!I took it in to get the error coded read and walked out with 3! Anyway, I was hesitant to fix the car myself as I had never changed an O2 sensor but it worked out great. It was a perfect fit. I didnt have to cut or splice wires. Anyone with a 7/8 wrench, a phillips screw driver, and jack can change this part. I was quoted almost $800 to fix my car and I did it myself for under $200 and got new break pads!
    103. dan
      22 Jan, 2011
      When I needed an O2 sensor for my Explorer I searched AutoPartsWAY for them and found this one. It fit exactly as it should have. Easy to install. Very happy to have saved some money getting this product.
    104. Bill Heissenbuttel
      03 Nov, 2010
      This is the rear (behind the catalytic converter) Oxygen sensor for a few different versions of Subrarus, including my 2001 Forester L. The heating element in the old sensor died (a P0037 engine code error) and I picked up one of these. I bought a Oxygen Sensor 3/8 drive socket to go with it and it took about 30 minutes to swap out the old one and put in the new one. Be sure to purchase some anti seize lubricant with copper Loctite - Copper Anti-Seize Stick, 20 gramOn Sale (37616) to coat the threads with so that if have to replace the O2 sensor again you can actually get it out of the socket. It's an easy job to do and I'd think anyone that can handle a socket set can do it. Don't pay $300 to have someone else do this job when you can do it yourself. Good luck!
    105. Ron
      25 Sep, 2010
      I am very happy made my truck run like new. And it fit just like oem.
    106. S. Box
      23 Jul, 2010
      Took no time what-so-ever to put in.1997 Subaru ImprezaWorks like a charm.
    107. Bob-O-Link
      14 May, 2010
      Bought this a year ago here at AutoPartsWAY.com and finally got around to installing it in my 1991 F150 based on age and mileage (97k). It fit just fine and the cable was an exact fit for the OEM harness. Surprisingly, the old one came out fairly easy with a warmed-up exhaust, 7/8" open-end wrench, a little PB blaster, and a couple of taps from a rubber hammer to get it started. Only issue was the threads in the exhaust got a little dinged up, but a quick run to Autozone for an Oxygen Sensor Thread Chaser ($9.99) solved that problem. I also added more anti-seize to the threads on the sensor as what came with it seemed a little sparse ... not that I ever plan to remove it.
    108. T.L.B. "HDTV.thx"
      05 May, 2010
      Not sure if you can convince me that there are quality differences in o2 sensors but Bosch is a brand name so thats what I slapped into my new cat-vertor...no idiot lights illuminated so I reckon it works just fine.
    109. David A. Frauenberger
      01 Feb, 2010
      After replacing the front oxygen sensor on my 2002 Hyundai Elantra GT with a dealer purchased sensor(about 90 dollars) my check engine light was still on. Upon further investigation with my OBD reader I realized that it was the oxygen sensor near the catalytic converter that was bad. When doing a search on AutoPartsWAY I was surprised to find that not only was the sensor available, it was at least half the dealer price. The sensor was an exact match to the original and solved my check engine light issue.
    110. Dr. Edwards
      29 Jan, 2010
      This product fit perfectly in my 2002 saturn L300 V6. No modification needed. Turned of engine light never came back. I used free shipping, it was here in 5 work days. I changed this part in 10 min. I unplugged it and used a 7/8 open wrench to change it.
    111. K. Phan
      10 Jan, 2010
      installed on my bmw without any issues. AutoPartsWAY offers this oem sensor at a great price and shipped free and fast! the part # listed is correct.
    112. Christopher R. Deford
      12 Nov, 2009
      the bosh sensors arrived very prompt and excellent shape plus the price for the same item at the local auto parts store was about 40% more.
    113. Bryon A. Johnson
      13 Jul, 2009
      The wiring length on this unit is only 12 inches. Would not fit my 1999 Dodge Ram 1500 which requires 18 inch wiring length. Note the length when ordering as the website states it will fit and does not state wire length. You might want to measure yours before ordering. I must say also that AutoPartsWAY is great for return this hassle free.
    114. (robot) " (robot)"
      14 Jun, 2009
      I bought the Bosch 15705 to replace the upstream oxygen sensor (the one before the catalytic converter) on my '98 Dodge Dakota. I had to replace it after the check engine light came on and my code scanner showed error code P0132.Since the original O2 sensor was made by NGK, the Bosch looks different in appearance but that doesn't really matter. Replacement was quite easy. All I used was a 7/8" flare nut wrench. A box end wrench won't work because the connector is too large to fit through. The Bosch sensor comes with the threads already coated with anti-seize compound. The electrical connector is an exact replacement so no cutting, splicing, or soldering is necessary.A week after I did the replacement, I took my Dakota in for State inspection and it passed!The only thing I regret was that I bought mine from the local auto parts store instead of from AutoPartsWAY. I could've saved myself $20.
    115. David Ellenwood
      01 Jun, 2009
      Seems to be as good as the OEM for my 2001 VW Jetta VR6. Plug is a match and works perfectly.
    116. Ryan Cawdor "Scarecrow"
      25 May, 2009
      This is probably the highest quality O2 sensor available and on AutoPartsWAY this is the best price. What I found when searching for the "correct" O2 sensor was that this particular sensor is shown as being "not correct for my vehicle" on AutoPartsWAY. This IS the correct sensor and after searching all the online parts stores to make sure I ordered from AutoPartsWAY. The price on AutoPartsWAY is substantially lower than the online auto parts stores. I installed this in the "after converter" position and it works like a champ! So if you need an O2 sensor and this is the correct part you cannot beat the cost from AutoPartsWAY!
    117. Pat Pulver
      22 May, 2009
      This product fit perfectly in my 2003 saturn L300 V6. No modification needed. Engine light gone in two days.
    118. C. Cosgrove
      04 May, 2009
      This was a perfect replacement for the factory O2 sensor behind the catalytic converter on my '96 Dodge pickup. No cutting or splicing required. I am highly satisfied.
    119. Pete Peterson "97 v6 camaro to 98 LS1"
      31 Mar, 2009
      Good sensor. I have a 97 camaro and swapped in a 98 LS1 motor with longtube headers on it. I had to make extensions for the stock O2's, and was then getting the infamous "slow response" DTC. I purchased the Bosch 13111's and the code went away, and the wires for them are long enough that I didn't have to make extensions for the LT headers.
    120. Glenville Foster "GF"
      06 Mar, 2009
      Sensor arrived very quickly in excellent condition. AutoPartsWAY.com price was well below other online retailers. Bosch has a very good reputation with replacement auto parts. I strongly recommend this product.
    121. R. Schuler
      04 Mar, 2009
      My results in a 1998 Saturn SL2 included a much smoother idle, increased performance during acceleration and a consistent 3 MPG increase in fuel economy. Don't wait for the check engine light to come on (which it also cured, in my case) replace it at specified intervals to keep your car running smoothly.Installation note: to tighten the sensor to required torque spec, you will need a crow's foot adapter, which you can get on loan for free from most auto parts stores.
    122. kegler280
      11 Feb, 2009
      I purchased this item for use in my 98 Saturn SL2. The sensor doesn't look exactly like the OEM one but it works and fits like the original one. The size of the wrench needed to remove the sensor is 22 mm. It installs easily and the electrical connector is the same.It comes with anti seize compound on the threads. Be careful not to get the compound on the open ports of the sensor as it may affect its performance. The sensor appears to be working as it should. The service engine soon light has not come back on since I installed the new sensor and the gas mileage has even improved! A great item at a good price.
    123. Dan Ngoc Le
      23 Feb, 2008
      It's an O2 sensor, how hard could it be to make? The product would flawless as if it were OEM. Bosch still has not let me down, despite many bad reviews I have read about them! Price was around 40 bucks per sensor for me, which is reasonable seeing that Ford wants around 100 bucks for the NGK products (rolls eyes)!
    124. E. Velazquez
      02 Jul, 2007
      Bosch Oxygen Sensor:Part Number: 13718This product fits the following vehicles:2002 JEEP WRANGLERL6 4.0 Liter FI - 242 CID VIN SL6 4.0 Liter FI - 242 CID VIN SL6 4.0 Liter FI - 242 CID VIN S2003 JEEP WRANGLERL6 4.0 Liter FI - 242 CID VIN SL6 4.0 Liter FI - 242 CID VIN SL6 4.0 Liter FI - 242 CID VIN SL6 4.0 Liter FI - 242 CID VIN SReplacing a worn-out oxygen sensor will save you money.Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and exhaust emissions. That's why checking for, and possibly replacing, a worn-out oxygen sensor is an important part of every routine tune-up. Plus, properly functioning oxygen sensors are good for the environment, and can save you hundreds of dollars in gasoline costs over the life of the sensorA worn-out oxygen sensor: * Wastes...
    125. Kim H "Kim"
      07 Apr, 2007
      Well, I don't really know how to review this, but it worked! My car is fixed now, and it came in a very timely manner!

    Related Products


    Loading...