2016 Lexus GS F Engine Oil Drain Plug Febi

w/o Gasket

Febi-Bilstein
Febi Bilstein is one of the world's leading suppliers of passenger car and commercial vehicle replacement parts to the independent aftermarket.
Febi Timing Belt Kit

The Febi Timing Belt Kit is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

• OE-Equivalent and a direct fit application.
• Complete replacement kit.
• Precision molded teeth.
• Resistant to abrasion and heat.
• Durable long life performance.

The Febi timing belt kit contains the manufacturer recommended parts needed for a timing belt replacement. (See Note for details)

Installation Note: Many vehicle manufacturers recommend the replacement of the water pump when the timing belt is replaced. Please refer to the manufacturer’s recommendations on inspection and/or replacing additional items during a timing belt replacement.

Warranty Information: 12 month - 12,000 mile limited warranty against defective materials and workmanship.

---

FEBI Air Filter

The FEBI Air Filter is an OE Equivalent replacement that maintains the OEM specifications for fit, durability and performance.

• Easy installation with a factory quality fit
• OE-quality engineering and materials.
• High airflow rate improves performance and fuel economy.
• Superior dust-holding capacity will increase filter life.
• Prevents particulate matter from entering the engine.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

FEBI Air Mass Meter Boot

The FEBI Air Mass Meter Intake boots meets or exceed the quality, fit and performance of the original equipment it replaces.

• Flexibility and vacuum stability thanks to folds and ribs
• Noise-dampened with specific stiffening
• Integration of pressure and/or temperature sensors
• Will not lose structural durability at high temperatures

Warranty Information: 12 month - 12,000 mile limited warranty against defective materials and workmanship.

---

FEBI Fuel Filter

Febi fuel filters are manufactured to the highest quality standards and meet or exceed the manufacturer’s requirements for fit, flow rate and durability.

• OE-Equivalent and direct fit application.
• Threaded connectors and original equipment quality mounting brackets.
• High-efficiency filter media.
• Pressure stable, heavy-duty housings.
• Provides protection against fuel system wear and corrosion

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Febi Expansion Tank

The Febi expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.

• OE-Equivalent and Direct Fit for easy Installation.
• OE style connections and fittings.
• Made of highly durable materials.
• Resistant to thermal wear and cracking.

WARRANTY INFORMATION: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

METRIX® Water Pumps:
METRIX® water pumps provide an outstanding coolant flow rate in all driving conditions, from stationary to high speed. Performance is guaranteed through corrosion protection, cavitation resistance, reliable sealing technology, and the use of high quality components.
METRIX® water pumps deliver optimal hydraulic efficiency with maximum pressure resistance to efficiently protect against over-heating while improving fuel consumption and reducing emissions.

OE Quality: Higher quality and reliable performance compared to competitive products
Exact fit: No additional time consuming steps needed for installation
OE Engineered: Optimal hydraulic efficiency, Maximum pressure resistance
Advanced Impeller Design: Outstanding coolant flow rate, Optimal hydraulic efficiency, Improves fuel consumption and reduces emissions

Advantages:

• METRIX® products are engineered and manufactured to do the job right the first time with a complete line for automotive and light truck applications.
• METRIX® provides the OEM fit and quality that maintains the integrity of your vehicle, as well as your reputation as a professional service center.
• METRIX® is your quality alternative for thermal products.
• METRIX® products are all brand new and carry a 24 month / 24,000 mile warranty.

FEBI Control Arm

The Febi control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

• OE-Equivalent and Direct fit for easy Installation.
• Manufactured using high quality OE materials.
• Includes factory specified hardware.

12 MONTH / 12,000 MILE LIMITED WARRANTY: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

FEBI Strut Mount

The Febi strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

• OE-Equivalent and direct fit application
• OE style mounts and fasteners
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

Installation Note: It is reccommended that the strut mounts should be replaced anytime the shocks or struts are removed.

WARRANTY INFORMATION: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Febi Brake Pads

The Febi OE formulated brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit.

• OE-Equivalent and Direct Fit application.
• Formulated to OE Specifications.
• Superior friction qualities.
• Organic compound.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Febi Brake Pad Wear Sensors

Febi electronic brake pad wear sensors are engineered and manufactured to original equipment specifications and are designed to withstand the extreme heat generated by the brake pads.

• Exact Replacement with OE Fittings and Connectors
• Highly Durable and Resistant to Temperatures
• Supplied with OE style electrical connectors

Warranty Information: 12 month - 12,000 mile limited warranty against defective materials and workmanship.

---

METRIX® Receiver Driers:
METRIX® receiver driers are manufactured to OE specifications and provide durable, efficient performance. The OE engineered internal components provide enhanced separation of liquid and vapor, along with a desiccant filter that effectively controls moisture and helps protect the entire A/C system against corrosion.
The METRIX® receiver drier features a lightweight aluminum or high strength steel assembly and provides an exact fit, just as an OE-quality part should.

OE Quality: Higher quality and reliable performance compared to competitive products
Exact fit: No additional time consuming steps needed for installation
OE Engineered: Provides enhanced separation of liquid and vapor.
OE Construction: Aluminum - Lightweight and Resists Corrosion, Steel - High Strenght
Desiccant Filter Controls moisture and helps protect the entire A/C system against corrosion

Advantages:

• METRIX® products are engineered and manufactured to do the job right the first time with a complete line for automotive and light truck applications.
• METRIX® provides the OEM fit and quality that maintains the integrity of your vehicle, as well as your reputation as a professional service center.
• METRIX® is your quality alternative for thermal products.
• METRIX® products are all brand new and carry a 24 month / 24,000 mile warranty.

METRIX® Blower Motor Assemblies:
METRIX® blower motor assemblies are designed and manufactured to OE specifications and provide the performance required in extreme conditions including; temperature fluctuations, dust, humidity and vibration.
METRIX® blower motor assemblies incorporate permanent magnets and lubricated bearings for dependable operation; contains OE style impellers for enhanced air flow, OE wire connectors, and a precision motor to deliver quiet vibration free operation.

OE Quality: Higher quality and reliable performance compared to competitive products
Exact fit: No additional time consuming steps needed for installation
OE Engineered: Highly efficient, reduced noise and vibration
Advanced Motor Design: Quiet trouble free operation, Permanent magnets and lubricated bearings
OE Impellers: Improved air flow, Balanced fan assembly

Advantages:

• METRIX® products are engineered and manufactured to do the job right the first time with a complete line for automotive and light truck applications.
• METRIX® provides the OEM fit and quality that maintains the integrity of your vehicle, as well as your reputation as a professional service center.
• METRIX® is your quality alternative for thermal products.
• METRIX® products are all brand new and carry a 24 month / 24,000 mile warranty.

Febi Activated Charcoal Cabin Filter

The Febi Activated Charcoal Cabin Filters are manufactured to exact OEM specifications to provide unsurpassed interior cabin quality while improving air quality in the HVAC system.

• Activated charcoal layer absorbs toxic and foul-smelling gases.
• OE Equivalent and a Direct Fit Application.
• Designed to trap contaminants before they enter the vehicle cabin.
• Carbon Activated Filter protects passengers by eliminating nearly 100% of exhaust pollutants entering the interior of the vehicle.
• Maximum airflow, minimum air noise.
• Manufactured to the specifications of leading automakers.

Activated Charcoal Cabin Air Filters: Cabin air filters with activated carbon elements remove harmful exhaust fumes, dirt and dust as well as high ozone concentrations and unpleasant smells. Their pleat bellows consist of three layers: an activated carbon layer is sandwiched between two layers of non-woven materials. The filter layers are heat-fused, which means that glues or solvents are not used at all. Depending on the vehicle type, activated carbon filters are also available that can be used instead of conventional cabin air filters.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Febi Particulate Cabin Filter

The Febi Particulate Cabin Filters are manufactured to exact OEM specifications to provide unsurpassed interior cabin quality while improving air quality in the HVAC system.

• OE Equivalent and a Direct Fit Application.
• Designed to trap contaminants before they enter the vehicle cabin.
• Maximum airflow, minimum air noise.
• Manufactured to the specifications of leading automakers.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Febi Activated Charcoal Cabin Filter Kit
1 Kit = 2 Cabin Filters

The Febi Activated Charcoal Cabin Filters are manufactured to exact OEM specifications to provide unsurpassed interior cabin quality while improving air quality in the HVAC system.

• Activated charcoal layer absorbs toxic and foul-smelling gases.
• OE Equivalent and a Direct Fit Application.
• Designed to trap contaminants before they enter the vehicle cabin.
• Carbon Activated Filter protects passengers by eliminating nearly 100% of exhaust pollutants entering the interior of the vehicle.
• Maximum airflow, minimum air noise.
• Manufactured to the specifications of leading automakers.

Activated Charcoal Cabin Air Filters: Cabin air filters with activated carbon elements remove harmful exhaust fumes, dirt and dust as well as high ozone concentrations and unpleasant smells. Their pleat bellows consist of three layers: an activated carbon layer is sandwiched between two layers of non-woven materials. The filter layers are heat-fused, which means that glues or solvents are not used at all. Depending on the vehicle type, activated carbon filters are also available that can be used instead of conventional cabin air filters.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Febi Cabin Filter Kit
1 Kit = 2 Cabin Filters

The Febi Particulate Cabin Filters are manufactured to exact OEM specifications to provide unsurpassed interior cabin quality while improving air quality in the HVAC system.

• OE Equivalent and a Direct Fit Application.
• Designed to trap contaminants before they enter the vehicle cabin.
• Maximum airflow, minimum air noise.
• Manufactured to the specifications of leading automakers.

Warranty Information: 12 month - 12,000 mile limited warranty against defects in material and workmanship.

---

Febi Multi Rib (Serpentine) Belt

The Febi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

• OE-Equivalent.
• Direct fit for easy installation.
• Resistant against wear, oil and heat.

Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts.

Warranty Information: 12 month - 12,000 mile limited warranty against defective materials and workmanship.

---