1979 Chevrolet K20 Distributor 8 Cyl 5.7L MSD

  • Features:
    • Designed for street/performance use w/mechanical or vacuum adv.
    • Must Be Used w/An MSD Ignition Control
    • Supplied w/An HEI Style Distributor Cap And Rotor
    • Accepts Cap-A-Dapts
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Advance weight pins are staked and tig welded to the plate
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
  • The Street Pro-Billet is a popular route for people looking for proven race performance for their street cars. A vacuum advance canister provides economy and the proven MSD mechanical advance gives you the opportunity to dial-in a timing curve to fit your needs. Inside, an oversized steel shaft is QPQ-coated for low friction and rides in a sealed ball bearing at the top of the distributor with an extra-long sintered bushing at the bottom. This combination keeps the shaft steady creating accurate spark delivery at any rpm.The Street Pro-Billet relies on a magnetic pick-up to trigger the MSD Ignition Control which delivers the powerful sparks to the coil. This pick-up is extremely accurate and never needs adjusting.

Additional Fitment Information:
Vehicle Block CC Engine CID
1979 Chevrolet K20 V - 8 Cyl 5.7L 350
Brand MSD
Part # M468361
Condition New
Warehouse B

MSD

  • w/Vacuum Advance; Iron Gear; Red;CARB E.O. D-40-39
  • Street Pro-Billet Distributor; w/Vacuum Advance; Iron Gear; Red;
  • Street Pro-Billet Distributor
  • General

    Distributor Type
    Magnetic Pickup
    WARNING CA Proposition 65
    Yes
    WARNING CA Proposition 65 Message
    Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    Engine Make/Size
    • Chevy Big Block (396-454)
    • Chevy Small Block (262-400)

    Packaging

    package quantity
    1
    weight
    4.65 lb
    Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
    1. Steve Denning
      30 Jan, 2015
      great product for marine use
    2. Edward Sharp
      24 Nov, 2014
      I received this product, from the manufacturer, damaged. I immediately sent an email to AutoPartsWAY who had a new shipped to me before I even mailed the old one back to the company. The new one worked great.
    3. diana ferrer
      17 Aug, 2014
      excelente
    4. Eric B.
      06 Aug, 2014
      Nice distributor. Will work nicely on the new motor.
    5. Silvana N.
      22 Jul, 2014
      perfect
    6. bigdaddy
      28 Aug, 2013
      This Distributor also fits a 92-93 F150xlt 302 4x4. Direct fit just plug in and go awesome product rely makes a difference
    7. R. Marten
      03 May, 2013
      This distributor was installed in a 1949 Ford V8 original flathead along with a new coil, wires, plugs, Holley 4 barrel carb and electric fuel pump. The engine starts SO easy and runs strong. The distributor installed very easy, instructions great. Engine timing was not a problem.I did initially have a poor connection from ignition switch to coil, which caused it not to start. You need to make sure you have 12 volts at coil not only initially, but also when engine is cranking - the distributor needs a lot more current flow than the original points/distributor/coil setup.
    8. TD Tech
      04 Mar, 2013
      Direct bolt on improvement in replacing the original Ford distributor. According to MSD this is for 94-95 Mustang 5.0L only but it is also an unstated direct replacement for 91-93 Thunderbird/Cougar.
    9. williewiskers
      11 Jan, 2013
      read title nothing more to say... ... ... .. ... ... .. ... . .. .. . . . . .
    10. Bryan
      16 Jan, 2012
      Very nice quality item. Installed as per complete instructions. Kit was missing three mounting bolts. Car runs well however it is early in the process. I am happy! Shipping was free from AutoPartsWAY and quick.

    Loading...