with Power Steering Gear
For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
In-Line Filter available
Remanufactured Steering Gear
Cardone is one of the world's premier manufacturers and Re-manufacturers. These two major product lines are defined as the famous remanufactured auto parts brand called A1 Cardone and the selection of brand new auto parts from Cardone Select. Since day one, remanufacturing auto parts (the renewal of worn parts back to new or better performance), has been the core of Cardone's business.
A1 Cardone products are the highest quality remanufactured parts in the automotive aftermarket because they don't just replace broken components. They completely disassemble every worn part, also known as a "core", and thoroughly clean and inspect every component. Through reverse engineering, they pinpoint original equipment design weaknesses through examining common wear areas to incorporate fixes into the remanufacturing process as needed to produce reliable products.
The same reverse-engineering experience that comes from the remanufacturing process is the foundation of Cardone Select's premium, all-new auto parts. Since they've seen where and why the original parts typically fail, Cardone's engineers include improvements into the Cardone Select new product designs. Cardone Select products are literally "built better from the start".
General
FAQ_Q4
Can I Adjust My Original Gear Box If It Has A Lot Of Play?
FAQ_Q1
Should The Power Steering Hoses Be Replaced?
Mounting Hardware Included
No
FAQ_Q3
How Can I Tell If My Gear Box Is A Standard Or Reverse Rotation?
FAQ_Q2
What Is The Difference Between A Fast Ratio And A Slow Ratio Gear Box?
Is Prop Sixty Five Affected
No
Product Condition
Remanufactured
Is the item CARB affected
No
Contains Electronic Components
No
Output Shaft Thread Diameter
Pressure Port Thread Diameter
Total Turns Lock To Lock
4.25
Is Or Contains A Battery
No
Return Port Thread Diameter
FAA_A4
Not Recommended. The Preload Is Adjusted At The Time Of Assembly. If Excessive Play Is Present, It’s Due To Wear Of Internal Components. If Adjustment Is Attempted, It Could Lead To Binding.
FAA_A2
The Difference Is The Orientation Of The Teeth On The Pitman Shaft And Power Piston. Variable Teeth Will Have A Faster Ratio Than Non-variable Teeth.
FAA_A3
In A Standard Rotation Gear Box, The Input And Pitman Shaft Rotate In The Same Direction. The Shafts Turn In Opposite Directions On A Reverse Rotation Gear Box.
FAA_A1
Hoses Should Be Replaced If They Appear Brittle Or If There Are Any Kinks Or Leaks.
Pressure Port Thread Size
16x1.5
Return Port Thread Size
16x1.5
Information on technical characteristics, the delivery set, the country of manufacture and the appearance
of the goods is for reference only and is based on the latest information available at the time of publication.