3" Adventure Series Lift Kit
Wheel and Tire Notes:
37" Tires - Minimal rubbing, see instructions for further tire/wheel fitment detail
275/70 with stock 18" Outer Banks Wheels
275/80 with stock 17" Black Diamond Wheels
315/70 with stock 17" Sasquatch Wheels
285/70 with stock 17" Badlands Wheel
F1431 & F1430 can be used ONLY with Base Suspension Package vehicles. This kit is designed to lift the front of the vehicle 4" and rear 3".
CV axle nut may need to be loosened and tightened on the ground with the weight the vehicle.
Although 37" x 12.50" will work at ride height, the tires will still contact the front body mount and possibly rear inner fender through wheel travel and steering lock to lock. If running this size tire and using the full suspension travel, these areas must be addressed.
Does not fit Bronco Sport models.
This lift system WILL fit a Bronco Badlands Model without Sasquatch with the Bilstein Struts. This kit will provide 3" of lift on this vehicle.
Not compatible with HOSS 3.0 or Raptor Models.
Take your Sasquatch-equipped Bronco higher with the 3" Adventure Series lift kit from Zone Offroad. Designed to maintain ride quality, handling and performance with room for larger tires, Kits build off the factory suspension geometry and add 2-piece strut spacers, Adventure Pro series upper control arms and all the necessary hardware to complete the install allowing clearance for 35-37" tires. Get the look and performance with Zone Offroad.
In the box:
Strut Spacers
Upper Control Arms
General
Front Lift Method
Strut Spacers
Max Tire Size 2
35 X 12.5
Accommodates Factory Wheels
See Notes
Information on technical characteristics, the delivery set, the country of manufacture and the appearance
of the goods is for reference only and is based on the latest information available at the time of publication.