Image
Product
Price
- w/HEI Stock Style Boots; 8mm; Graphite Core; Wires Routed Over Valve Cover; Yellow
- Custom Fit Super Stock Spark Plug Wire Set; w/HEI Stock Style Boots; 8mm; Graphite Core; Wires Routed Over Valve Cover; Yellow;
- Custom Fit Super Stock Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8mm
- Wire Series: Superstock
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: No
- Core Type: Carbon Graphite
- Boot Type: Oem
- Wire Temperature Rating: 450 Degree
- Boot Material: Silicone
- Engine: Universal 8 Cylinder
- Resistance: Meets Or Exceeds Oe
-
Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Chevrolet P20 | V | - | 8 Cyl 5.7L | 350 |
- Spiral Core; 8.8mm; Yellow Wire w/Red Boots; Male Tower Dist. Cap/HEI Boots
- Custom Fit Spark Plug Wire Set; Spiral Core; 8.8mm; Yellow Wire w/Red Boots; Male Tower Dist. Cap/HEI Boots;
- Custom Fit Spark Plug Wire Set
- Product Attributes:
- Wire Diameter: 8.8mm
- Wire Series: 8.8mm Wire
- Boot Temperature Rating: Meets Or Exceeds Oe
- WARNING CA Proposition 65: No
- Core Type: Spiral
- Boot Type: Oem
- Wire Temperature Rating: 550 Degree
- Boot Material: Silicone
- Engine: Universal 8 Cylinder
- Resistance: 500 Ohms Per Ft.
- Boot Angle: 90 Degree
-
Features:
- 500 Ohms/ft. Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- Custom-fit Universal And Import Coverage
- Pre And Post HEI Vehicles
- These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Chevrolet P20 | V | - | 8 Cyl 5.7L | 350 |
- Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];0.040 in. Plug Gap
- HP Copper Spark Plug; Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];
- HP Copper Spark Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- Torque Capacity: 7.2 Ft/lbs. - 14.5 Ft/lbs.
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 8
-
Features:
- Copper Core Is A Better Conductor Than Iridium Or Platinum Plugs
- Copper Dissipates Heat Much Better Than Other Materials
- C-Cut Design/Un-Shrouding The Spark Kernel
- Gapable Unlike Iridium Or Platinum
- Machine Rolled Threads-Precise Thread Engagement
- Stock Heat Range
- On The Street Or Strip
- Accel Hp Copper Core Spark Plugs Deliver!
- ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Chevrolet P20 | V | - | 8 Cyl 5.7L | 350 |
- HEI Style; Tan
- Distributor Cap And Rotor Kit; HEI Style; Tan;
- Distributor Cap And Rotor Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Features Protection From Arc Thru And Crossfire
- Features 60K V Rated Alkyd Compound
- Brass Terminals Inserts And Steel Rotor Springs
- High Spark Energy Flow
- ACCEL cap and rotor kits offer superior protection from arc-thru and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Chevrolet P20 | V | - | 8 Cyl 7.4L | 454 |
- HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;CARB E.O. D-221-6
- SuperCoil Ignition Coil; HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;
- SuperCoil Ignition Coil
- Product Attributes:
- Peak Increase in Voltage: 18%
- WARNING CA Proposition 65: Yes
- Turns Ratio: 80:1
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Maximum Voltage: 45000
- Primary Resistance: .500 Ohms
- Package Quantity: 1
- Secondary Resistance: 8.6k Ohms
-
Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
- Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Additional Fitment Information:
| Vehicle |
|---|
| 1979 - Chevrolet P20 |
- 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;0.040 in. Plug Gap
- U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 8
-
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
- ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Chevrolet P20 | V | - | 8 Cyl 5.7L | 350 |
- Heavy Duty; Black
- Distributor Cap And Rotor Kit; Heavy Duty; Black;
- Distributor Cap And Rotor Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
-
Features:
- Features Protection From Arc Thru And Crossfire
- Features 60K V Rated Alkyd Compound
- Brass Terminals Inserts And Steel Rotor Springs
- High Spark Energy Flow
- See Catalog For Application Information
- ACCEL cap and rotor kits offer superior protection from arc-thru and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Chevrolet P20 | V | - | 8 Cyl 7.4L | 454 |
- 14mm Thread; .460 in. Reach; Heat Range 6; Each;0.040 in. Plug Gap
- U-Groove Copper Spark Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Each;
- U-Groove Copper Spark Plug
- Product Attributes:
- Hex Size: 0.625 In.
- Reach: 0.460 In.
- Thread Size: 14mm
- Resistor: Yes
- Torque Capacity: 7.2 Ft/lbs. - 14.5 Ft/lbs.
- WARNING CA Proposition 65: No
- Assembly Method: Tapered
- Projected Tip: Yes
- Gap Size: 0.032 In.
- Package Quantity: 1
-
Features:
- Copper Core Is A Better Conductor Than Iridium Or Platinum Plugs
- Copper Dissipates Heat Much Better Than Other Materials
- C - Cut Design Un-shrouds The Spark Kernel For Better Burn
- Unlike Iridium Or Platinum Plugs
- The Accel Hp Plugs Are Gapable
- Machined Rolled Threads For Precise Thread Engagement
- Stock Heat Range
- Whether Using On Street/Strip The HP Copper Core Plugs Deliver!
- Made with a Copper Core Which is a Better Conductor than Platinum and Iridium. Delivers a Stronger Spark Especially in High Performance Application Where High Combustion Pressures Are Present. Copper is Much Better at Dissipating Heat Than Other Materials Which Lessons the Chance of a Misfire. Gapable Allowing You to Open the Gap Exposing a Larger Flame Kernel or Close it if Needed For High Boost Applications. All ACCEL HP Spark Plugs Have Machine Rolled Threads Allowing For a More Precise Thread Engagement and Torque Retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Chevrolet P20 | V | - | 8 Cyl 5.7L | 350 |
Showing 1 - 8 of 8 products
Loading...