Accel Parts


Showing 1 - 10 of 181 products
Image
SKU
Product
Rating
Price

Accel
  • Yellow Wire; 8mm; Graphite Core; Straight Boots
  • Universal Fit Spark Plug Wire Set; Yellow Wire; 8mm; Graphite Core; Straight Boots;
  • Universal Fit Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Boot Temperature Rating: Meets Or Exceeds Oe
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Boot Type: Straight
    • Engine: Universal 8 Cylinder
    • Boot Angle: Straight
    • Wire Series: Superstock
    • Core Type: Carbon Graphite
    • Wire Temperature Rating: 450 Degree
    • Boot Material: Silicone
    • Resistance: Meets Or Exceeds Oe
  • Features:
    • 7mm And 8mm High Gloss Silicone Jacket
    • 450° F Rated Silicone Jacket
    • Stainless Steel Plug Terminals
    • RFI Suppression For Street Driven Applications
    • Custom-fit Universal And Import Coverage
    • High-strength Fiberglass Braid Construction
    • Pre And Post HEI Vehicles
  • ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1992 - Dodge D250 V - 8 Cyl 5.9L 360

Accel
  • HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;CARB E.O. D-221-6
  • SuperCoil Ignition Coil; HEI In-Cap Design; Primary Resist 0.5 Ohms; Secondary 8.6 k Ohms; Turn Ratio 80:1; Max Voltage 45000V; Red And Yellow Primary Wire; Gray;
  • SuperCoil Ignition Coil
  • Product Attributes:
    • Peak Increase in Voltage: 18%
    • WARNING CA Proposition 65: Yes
    • Turns Ratio: 80:1
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Maximum Voltage: 45000
    • Primary Resistance: .500 Ohms
    • Package Quantity: 1
    • Secondary Resistance: 8.6k Ohms
  • Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Dr-31
    • MSD 8225
  • Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Additional Fitment Information:
Vehicle Block CC Engine CID
1981 - Jeep CJ7 L - 6 Cyl 4.2L 258

Accel
  • Spiral Core; 8.8mm; Yellow Wire w/Red Boots; Male Tower Dist. Cap/HEI Boots
  • Custom Fit Spark Plug Wire Set; Spiral Core; 8.8mm; Yellow Wire w/Red Boots; Male Tower Dist. Cap/HEI Boots;
  • Custom Fit Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8.8mm
    • Wire Series: 8.8mm Wire
    • Boot Temperature Rating: Meets Or Exceeds Oe
    • WARNING CA Proposition 65: No
    • Core Type: Spiral
    • Boot Type: Oem
    • Wire Temperature Rating: 550 Degree
    • Boot Material: Silicone
    • Engine: Universal 8 Cylinder
    • Resistance: 500 Ohms Per Ft.
    • Boot Angle: 90 Degree
  • Features:
    • 500 Ohms/ft. Of Resistance
    • 550 F Rated Silicone Jacket
    • Stainless Steel Plug Terminals
    • Custom-fit Universal And Import Coverage
    • Pre And Post HEI Vehicles
  • These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Additional Fitment Information:
Vehicle Block CC Engine CID
1977 - Buick Regal V - 8 Cyl 5.7L 350

Accel
  • w/HEI Stock Style Boots; 8mm; Graphite Core; Wires Routed Over Valve Cover; Yellow
  • Custom Fit Super Stock Spark Plug Wire Set; w/HEI Stock Style Boots; 8mm; Graphite Core; Wires Routed Over Valve Cover; Yellow;
  • Custom Fit Super Stock Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Wire Series: Superstock
    • Boot Temperature Rating: Meets Or Exceeds Oe
    • WARNING CA Proposition 65: No
    • Core Type: Carbon Graphite
    • Boot Type: Oem
    • Wire Temperature Rating: 450 Degree
    • Boot Material: Silicone
    • Engine: Universal 8 Cylinder
    • Resistance: Meets Or Exceeds Oe
  • Features:
    • 7mm And 8mm High Gloss Silicone Jacket
    • 450° F Rated Silicone Jacket
    • Stainless Steel Plug Terminals
    • RFI Suppression For Street Driven Applications
    • Custom-fit Universal And Import Coverage
    • High-strength Fiberglass Braid Construction
    • Pre And Post HEI Vehicles
  • ACCELs SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model Engine VIN CID
1977 - Buick Century V 5733 8 Cyl 5.7L Base H 350

Accel
  • 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.035 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.750 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.044 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Dodge B1500 V 5211 8 Cyl 5.2L 318

Accel
  • 14mm Thread; 3/4 in Reach; Heat Range 6; 4 Pack;0.060 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Heat Range 6; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.750 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.035 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle
1994 - Isuzu Amigo

Accel
  • 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;0.060 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; .708 in. Reach; Heat Range 6; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.708 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Electrode Material: Copper
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Element Material: Copper
    • Gap Size: 0.060 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle
1997 - Chevrolet Cavalier

Accel
  • 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;0.050 in. Plug Gap
  • U-Groove Resistor Spark Plug; 14mm Thread; 3/4 in Reach; Hot Heat Range; 4 Pack;
  • U-Groove Resistor Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.750 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Gasket (flat)
    • Projected Tip: Yes
    • Gap Size: 0.044 In.
    • Package Quantity: 4
  • Features:
    • Resistor
    • Blister Pack
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle
1995 - Dodge Neon

Accel
  • Extreme 9000 Ceramic Boot Spark Plug Wire Set
  • w/Terminals For Male And Female Tower Caps; 8mm; 90 Deg. Boots; 500 Ohms Per Foot; Black With Ram Air
  • Extreme 9000 Ceramic Boot Spark Plug Wire Set; Universal w/Terminals For Male And Female Tower Caps; 8mm; 90 Deg. Boots; 500 Ohms Per Foot; Black;
  • Extreme 9000 Ceramic Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Wire Series: Extreme 9000 Ceramic
    • WARNING CA Proposition 65: Yes
    • Core Type: Ferro-spiral
    • Boot Type: 90 Degree
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Wire Temperature Rating: 600 Degree
    • Boot Material: Ceramic
    • Engine:
      • Universal 4 Cylinder
      • Universal 6 Cylinder
      • Universal 8 Cylinder
    • Resistance: 500 Ohms Per Ft.
    • Boot Angle: 90 Degree
  • Features:
    • 500 Ohms/ft. Ferro Spiral Core
    • Highest RFI/EMI Suppression Level
    • 8mm Double Silicone Construction Black Wire Rated To 600° F
    • Ceramic Boots Withstand Up To 2000° F
    • Superb Energy Delivery WhileProviding Highest RFI/EMI Suppression
    • Available With Either Straight/90 Degree/135 Degree Boots
    • Pre And Post HEI Vehicles
    • Stainless Steel Plug Terminals
  • ACCEL now offers the cure for burnt spark plug wire boots with Extreme 9000 Ceramic Wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. The ceramic boots will withstand up to 2,000 degrees F. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots. The wire uses a 500 Ohms/ft Ferro-Spiral core developed for performance use. It provides excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. The Extreme 9000 Ceramic Wires also feature stainless steel spark plug terminals for maximum spark energy to the plugs.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1961 - Chrysler Imperial V - 8 Cyl 6.8L Crown 413

Accel
  • Extreme 9000 Ceramic Boot Spark Plug Wire Set
  • w/Terminals For Male And Female Tower Caps; 8mm; 90 Deg. Boots; 500 Ohms Per Foot; Black
  • Extreme 9000 Ceramic Boot Spark Plug Wire Set; Universal w/Terminals For Male And Female Tower Caps; 8mm; 90 Deg. Boots; 500 Ohms Per Foot; Black;
  • Extreme 9000 Ceramic Spark Plug Wire Set
  • Product Attributes:
    • Wire Diameter: 8mm
    • Wire Series: Extreme 9000 Ceramic
    • WARNING CA Proposition 65: Yes
    • Core Type: Ferro-spiral
    • Boot Type: 90 Degree
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Wire Temperature Rating: 600 Degree
    • Boot Material: Ceramic
    • Engine:
      • Universal 4 Cylinder
      • Universal 6 Cylinder
      • Universal 8 Cylinder
    • Resistance: 500 Ohms Per Ft.
    • Boot Angle: 90 Degree
  • Features:
    • 500 Ohms/ft. Ferro Spiral Core
    • Highest RFI/EMI Suppression Level
    • 8mm Double Silicone Construction Black Wire Rated To 600° F
    • Ceramic Boots Withstand Up To 2000° F
    • Superb Energy Delivery WhileProviding Highest RFI/EMI Suppression
    • Available With Either Straight/90 Degree/135 Degree Boots
    • Pre And Post HEI Vehicles
    • Stainless Steel Plug Terminals
  • ACCEL now offers the cure for burnt spark plug wire boots with Extreme 9000 Ceramic Wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. The ceramic boots will withstand up to 2,000 degrees F. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots. The wire uses a 500 Ohms/ft Ferro-Spiral core developed for performance use. It provides excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. The Extreme 9000 Ceramic Wires also feature stainless steel spark plug terminals for maximum spark energy to the plugs.

Additional Fitment Information:
Vehicle
1964 - Mercedes-Benz 600
Showing 1 - 10 of 181 products

Loading...