1988 Chevrolet Monte Carlo Accel Parts

Choose your Submodel for your 1988 Chevrolet Monte Carlo


Showing 1 - 10 of 11 products
Image
SKU
Product
Rating
Price

Accel
  • 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;0.030 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 4
  • Features:
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Improves Spark Plug Access To Fit Socket Or Wrench
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Copper Core Center Electrode
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine Sub Model Engine VIN CID
1988 - Chevrolet Monte Carlo V - LG4 8 Cyl 5.0L LS H 305

Accel
  • 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;0.045 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 8
  • Features:
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Copper Core Center Electrode
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine Sub Model Engine VIN CID
1988 - Chevrolet Monte Carlo V - LG4 8 Cyl 5.0L LS H 305

Accel
  • Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];0.040 in. Plug Gap
  • HP Copper Spark Plug; Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];
  • HP Copper Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Torque Capacity: 7.2 Ft/lbs. - 14.5 Ft/lbs.
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 8
  • Features:
    • Copper Core Is A Better Conductor Than Iridium Or Platinum Plugs
    • Copper Dissipates Heat Much Better Than Other Materials
    • C-Cut Design/Un-Shrouding The Spark Kernel
    • Gapable Unlike Iridium Or Platinum
    • Machine Rolled Threads-Precise Thread Engagement
    • Stock Heat Range
    • On The Street Or Strip
    • Accel Hp Copper Core Spark Plugs Deliver!
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine Sub Model Engine VIN CID
1988 - Chevrolet Monte Carlo V - L69 8 Cyl 5.0L SS G 305

Accel
  • Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];0.045 in. Plug Gap
  • HP Copper Spark Plug; Stock Heat Range; 0.032 in. Gap; 5/8 in. Hex Size; .460 in. Reach; Resistor; Tapered Seat Type; 1.25mm Thread Pitch; 14mm Thread Size; 8 Pack Of PN[0576];
  • HP Copper Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Torque Capacity: 7.2 Ft/lbs. - 14.5 Ft/lbs.
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 8
  • Features:
    • Copper Core Is A Better Conductor Than Iridium Or Platinum Plugs
    • Copper Dissipates Heat Much Better Than Other Materials
    • C-Cut Design/Un-Shrouding The Spark Kernel
    • Gapable Unlike Iridium Or Platinum
    • Machine Rolled Threads-Precise Thread Engagement
    • Stock Heat Range
    • On The Street Or Strip
    • Accel Hp Copper Core Spark Plugs Deliver!
  • ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine Sub Model Engine VIN CID
1988 - Chevrolet Monte Carlo V - LG4 8 Cyl 5.0L LS H 305

Accel
  • HEI; High Dielectric Strength Cap w/Brass Male Towers; Direct Plug And Play; Includes OE Style Ignition Module; Cast Aluminum; Polished;O.E.M. Replacement Part
  • Performance Distributor; HEI; High Dielectric Strength Cap w/Brass Male Towers; Direct Plug And Play; Includes OE Style Ignition Module; Cast Aluminum; Polished;
  • Performance Distributor
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • WARNING CA Proposition 65: No
    • Engine Make/Size:
      • Chevy Big Block (396-454)
      • Chevy Small Block (265-350)
  • Features:
    • Distributor Cap w/Brass Terminals
    • All New Cast Aluminum Housings For Durability
    • OEM Style Ignition Modules For Trouble-Free Service
    • High-Quality Distributor Gears
    • Long Sintered Bushings For Long Life
  • ACCEL Performance Distributors are the perfect choice for your daily driver or street machine, We know the importance of a good quality distributor that doesnt break the bank. These distributors feature a cast aluminum housing with a sintered bronze bushings for long life. An OEM style module is included along with a high-quality gear and cap with brass terminals for many miles of trouble-free service. ACCEL Performance Distributors are built to deliver performance at a value-based price.

Additional Fitment Information:
Vehicle Block CC Engine CID
1988 - Chevrolet Monte Carlo V - 8 Cyl 5.0L 305

Accel
  • Non Computer Controlled w/HEI; Standard Deck Height; w/Coil And Coil Cover;O.E.M. Replacement Part
  • Performance Distributor; Non Computer Controlled w/HEI; Standard Deck Height; w/Coil And Coil Cover;
  • Performance Distributor
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Engine Make/Size:
      • Chevy 454
      • Chevy Small Block (350-400)
  • Features:
    • Direct Plug In Factory Replacement Plug And Play
    • CNC Machined 6061 T6 Billet Aluminum Housing
    • High Dielectric Strength Thermoplastic Cap w/Brass Terminals
    • 4 Topin Module w/Dwell Control Triggers At 75 R
    • Easy Access Fully Adjustable Mechanical Advance
    • Adjustable Vacuum Advance
    • Fit Non Computerized Vehicles
    • Includes Performance Coil
    • Fits Non-Computerized Vehicles
  • Performance Replacement HEI Distributor, direct plug-in with OE type connectors, GM HEI equipped Cars, Trucks (Pre-Computer). High dielectric strength cap, brass male towers.ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Additional Fitment Information:
Vehicle Block CC Engine CID
1988 - Chevrolet Monte Carlo V - 8 Cyl 5.0L 305

Accel
  • Standard; Shorty Plug For Headers; 4 Pack;0.045 in. Plug Gap
  • U-Groove Spark Plug Header Plug; Standard; Shorty Plug For Headers; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: No
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 4
  • Features:
    • Header-Box
    • U-Groove Ground Electrode
    • Five-Rib Aluminum Insulator
    • Copper Core Nickel/Chrome Steel
    • Electric Heat Seal
    • Copper-Glass Gas-Tight Seal
    • Less Flame Dissipation
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1988 - Chevrolet Monte Carlo V - 6 Cyl 4.3L LS 262

Accel
  • 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;0.060 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 4 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 4
  • Features:
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Improves Spark Plug Access To Fit Socket Or Wrench
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Copper Core Center Electrode
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1988 - Chevrolet Monte Carlo V - 6 Cyl 4.3L LS 262

Accel
  • 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;0.040 in. Plug Gap
  • U-Groove Spark Plug Header Plug; 14mm Thread; .460 in. Reach; Tapered Seat; 5/8 Hex; Projected Tip; Resistor; 2 Of PN[0576S-4]; 8 Pack;
  • U-Groove Spark Plug Header Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 8
  • Features:
    • Shorty Spark Plugs For Tubular Exhaust Headers
    • Eliminates Dimpling Headers For Added Clearance
    • Shorter Overall Plug Length Vs. OE Style Plug
    • Copper Core Center Electrode
    • Projected Tip
    • Helps Eliminate Burned Spark Plug Boots
    • Shorty Header Spark Plug
  • ACCELs patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine Sub Model Engine VIN CID
1988 - Chevrolet Monte Carlo V - L69 8 Cyl 5.0L SS G 305

Accel
  • 14mm Thread; .460 in. Reach; Heat Range 6; Each;0.045 in. Plug Gap
  • U-Groove Copper Spark Plug; 14mm Thread; .460 in. Reach; Heat Range 6; Each;
  • U-Groove Copper Spark Plug
  • Product Attributes:
    • Hex Size: 0.625 In.
    • Reach: 0.460 In.
    • Thread Size: 14mm
    • Resistor: Yes
    • Torque Capacity: 7.2 Ft/lbs. - 14.5 Ft/lbs.
    • WARNING CA Proposition 65: No
    • Assembly Method: Tapered
    • Projected Tip: Yes
    • Gap Size: 0.032 In.
    • Package Quantity: 1
  • Features:
    • Copper Core Is A Better Conductor Than Iridium Or Platinum Plugs
    • Copper Dissipates Heat Much Better Than Other Materials
    • C - Cut Design Un-shrouds The Spark Kernel For Better Burn
    • Unlike Iridium Or Platinum Plugs
    • The Accel Hp Plugs Are Gapable
    • Machined Rolled Threads For Precise Thread Engagement
    • Stock Heat Range
    • Whether Using On Street/Strip The HP Copper Core Plugs Deliver!
  • Made with a Copper Core Which is a Better Conductor than Platinum and Iridium. Delivers a Stronger Spark Especially in High Performance Application Where High Combustion Pressures Are Present. Copper is Much Better at Dissipating Heat Than Other Materials Which Lessons the Chance of a Misfire. Gapable Allowing You to Open the Gap Exposing a Larger Flame Kernel or Close it if Needed For High Boost Applications. All ACCEL HP Spark Plugs Have Machine Rolled Threads Allowing For a More Precise Thread Engagement and Torque Retention.

Additional Fitment Information:
Vehicle Block CC Engine Designation Engine Sub Model Engine VIN CID
1988 - Chevrolet Monte Carlo V - LG4 8 Cyl 5.0L LS H 305
Showing 1 - 10 of 11 products

Loading...