2016 Toyota Tacoma ICON Vehicle Dynamics Parts
Choose your Submodel for your 2016 Toyota Tacoma
Image
Product
Price
- Used with 0 (in) to 2.75 (in) Lift Also Requires Part Number 56107 Also Requires Part Number 59706P, 59706CP, or 59906P Use Up To 33 (in) x 11.50 (in) Tires 0 (mm) Offset Wheels Recommended
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota Tacoma | Front | SR5 |
- Used with 0 (in) to 2.75 (in) Lift Use Up To 33 (in) x 11.50 (in) Tires Requires Welding ; Recommended Aftermarket Wheel Size: 17x8.5 with 4.75” Backspace / 0mm Offset
- 2016-UP TACOMA LCalifornia SKID PLATE KIT
- 16-23 TACOMA SKID PLATE KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Mounting Hardware Included: Yes
- Configuration: One Piece
- Mount Hole Quantity: 3
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Attachment Type: Bolt On
- Surface Material: Powdercoated
- Logo Location: Left And Right
- Drilling Required: Yes
- Material: Steel
-
Features:
- Bolt-on design
- Made from 3/16" laser cut steel
- Durable black powdercoat finish
- Serves as the lower shock mount for our S2 Modular Secondary Shock System
- Adds protection from rocks and trail debris during on or off-road use
- The ICON bolt on skid plate system also serves as a locator for the lower shock mount for our S2 Modular Performance Shock System. This modular approach allows you to install these skid plates without waste if you decide to upgrade and add the full S2 system down the road. You are able to purchase knowing it is 1 of the 3 components you will need to run the S2 Secondary Shock System, giving you the opportunity to build in stages if you choose.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota Tacoma | Suspension Control Arm (Front) | Limited |
- 05-23 TACOMA 4WD 0-1.5" REAR 2.0 VS RR
- with 2 (in) Maximum Lift Rear
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved performance. These shocks feature remote reservoirs, are vehicle specific, 100% rebuildable/revalveable.
- 05-UP TACOMA 4WD 0-1.5" REAR 2.0 VS RR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: Yes
- External Reservoir: Yes
- Remote Reservoir: Yes
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Adjustable: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Internal Construction Type: Single Tube
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 2
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota Tacoma | Rear | SR5 |
- with 2 (in) Maximum Lift Rear
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved performance. These shocks feature remote reservoirs, are vehicle specific, 100% rebuildable/revalveable.
- 05-23 TACOMA 4WD 0-1.5" REAR 2.0 VS RR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: Yes
- External Reservoir: Yes
- Remote Reservoir: Yes
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Adjustable: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Internal Construction Type: Single Tube
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 2
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota Tacoma | Rear | SR5 |
- 16-23 TACOMA SKID PLATE KIT
- 2016-UP TACOMA LCalifornia SKID PLATE KIT
- 16-UP TACOMA SKID PLATE KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Mounting Hardware Included: Yes
- Configuration: One Piece
- Mount Hole Quantity: 3
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Attachment Type: Bolt On
- Surface Material: Powdercoated
- Logo Location: Left And Right
- Drilling Required: Yes
- Material: Steel
-
Features:
- Bolt-on design
- Made from 3/16" laser cut steel
- Durable black powdercoat finish
- Serves as the lower shock mount for our S2 Modular Secondary Shock System
- Adds protection from rocks and trail debris during on or off-road use
- The ICON bolt on skid plate system also serves as a locator for the lower shock mount for our S2 Modular Performance Shock System. This modular approach allows you to install these skid plates without waste if you decide to upgrade and add the full S2 system down the road. You are able to purchase knowing it is 1 of the 3 components you will need to run the S2 Secondary Shock System, giving you the opportunity to build in stages if you choose.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Toyota Tacoma | Front |
- 05-23 TACOMA 4WD 0-1.5" REAR 2.0 VS NR
- Used with 0" to 1.5" Lift Except 5 Lug Models
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 05-UP TACOMA 4WD 0-1.5" REAR 2.0 VS NR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 1.5
- Includes Bump Stop: No
-
Features:
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Toyota Tacoma | Rear |
- 07-14 FJ/03-24 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Used with 0 (in) to 2.75 (in) Lift Also Requires Part Number 56107 Also Requires Part Number 59706P, 59706CP, or 59906P Use Up To 33 (in) x 11.50 (in) Tires ; Recommended Aftermarket Wheel Size: 17x8.5 with 4.75” Backspace / 0mm Offset
- The S2 Modular Performance shock system utilizes the factory lower control arm and maintains OE track width while providing the ability to bolt on a secondary from shock aborber for addition shock damping.
- 07-14 FJ/03-23 4RUNNER/05-23 TACOMA S2 SHOCK HOOP KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Material: Dom Steel
- California Prop 65 Warning: Yes
-
Features:
- Does not require welding to the frame
- Retains robust factory bumpstops
- Does not require aftermarket lower control arms
- Can be purchased in stages
- Simple installation
- Lifetime Warranty on fabricated and machined parts
- The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options provides even further tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota Tacoma | Front | SR5 |
- 05-23 TACOMA BILLET UCalifornia DJ KIT
- Use Up To 33 (in) x 11.50 (in) Tires; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- ICON billet UCAs are made from CNC machined 6061 aluminum and feature PTFE-lined rod ends and ICON’s Delta Joint, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
- 05-UP TACOMA BILLET UCalifornia DJ KIT
- Product Attributes:
- AAP_UDA_22: 1
- Ball Joint Included: Yes
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- End 1 Type: Rod End Bearing
- Control Arm Material: Aluminum
- Finish: Anodized
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Ball Joint Stud Type: Threaded
- End 2 Type: Ball Joint
- Adjustable: Yes
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Control Arm Color: Gray
- Adjustable Control Arm: Yes
- Material: Aluminum
- Service Parts: 614520 - Delta Joint Install Adapter And Shim
- AAP_UDA_12: Ea
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels:
- Icon Alloys - 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys - 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys - 20x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
- Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
- Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- California Prop 65 Warning: Yes
- Grease Fitting Included: No
- Pre-Greased: No
- Construction: Billet
- OEM Wheels & Tires Fitment: Yes
-
Features:
- Features patended ICON Delta Joint (U.S. Pat. 10,731,700)
- CNC Machined 6061 Billet Aluminum Construction
- High-Quality PTFE-lined ¾” FK Rod Ends
- On-Vehicle Adjustable For Quick And Precise Alignment
- Caster and Camber Adjustability Allows For Fine Tuning Of Vehicle Handling
- Matte Anodized Finish Provides Exceptional Corrosion Resistance
- O-ring Sealed Delta Joint Cover Cap For Additional Protection From The Elements
- Take the performance of your 2005-2023 Toyota Tacoma to new levels with the ICON Vehicle Dynamics Delta Joint billet aluminum upper control arm kit. All ICON billet upper control arms are constructed from CNC machined 6061 aluminum and then finished in a matte anodization process for maximum strength and corrosion resistance. ICON billet aluminum upper control arms feature quality PTFE-lined rod ends and machined adjuster sleeves that allow for on-vehicle alignment adjustment and precision caster and camber tuning. Another major benefit of ICON upper control arms is the potential for increased wheel travel when paired with our extended travel coilovers. The additional droop travel provided by these components translates into superior performance and ride quality for your 2005-2023 Toyota Tacoma. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota Tacoma | Front Upper | SR5 |
- Use Up To 33 (in) x 11.50 (in) Tires Requires Removal of OE Leaf Spring Overload Leaves Raises Rear 1.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- The ICON Add-A-Leaf kit is a great way to lift the rear of your 96-23 Tacoma or 00-06 Tundra while also improving rear end ride quality. Simply remove the factory overload spring, bolt up the kit, and say goodbye to that rough factory ride.
- 96-23 TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Helper Spring: No
- Leaf Width: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Quantity: 3
- U Bolts Included: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 1.5
- Axle Modification Needed: No
- Suspension Grade Type: Performance
- Axle Orientation: Rear
- Material: Steel
-
Features:
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- The ICON Vehicle Dynamics Progressive Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota Tacoma | Rear | SR5 |
- Use Up To 33 (in) x 11.50 (in) Tires Rear Raise Height 1.5 (in) Requires Removal of OE Leaf Spring Overload Leaves Raises Rear 1.5 (in) ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset
- The ICON Add-A-Leaf kit is a great way to lift the rear of your 96-23 Tacoma or 00-06 Tundra while also improving rear end ride quality. Simply remove the factory overload spring, bolt up the kit, and say goodbye to that rough factory ride.
- 96-23 TACOMA/00-06 TUNDRA 1.5" ADD-A-LEAF KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Helper Spring: No
- Leaf Width: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Leaf Quantity: 3
- U Bolts Included: Yes
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Maximum Lift: 1.5
- Axle Modification Needed: No
- Suspension Grade Type: Performance
- Axle Orientation: Rear
- Material: Steel
-
Features:
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- The ICON Vehicle Dynamics Progressive Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2016 - Toyota Tacoma | Rear | SR |
Showing 1 - 10 of 77 products
Loading...