2017 Ram 3500 Mishimoto Parts
Choose your Submodel for your 2017 Ram 3500
Image
Product
Price
- Dodge Ram 6.7L Cummins Intercooler, 2013-2018
- Intercooler, fits Dodge 6.7L Cummins 2013-2018
- Product Attributes:
- SellingPoint04: 76.65-percent Greater Internal Volume Than Factory
- TechSpec Pipe Shape: N/a
- SellingPoint05: 37.8-percent Larger Core Volume Than Factory
- SellingPoint06: Includes New Air Ducts To Divert Air Into The Core And New Lower Fan Shroud Section
- SellingPoint07: End Tanks Strategically Designed For Optimal Airflow
- SellingPoint01: Direct Fit For The 2013-2018 Dodge Ram 6.7l Cummins
- SellingPoint02: Bar-and-plate Construction With Cast Aluminum End Tanks
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 33
- SellingPoint03: Lowers Ait By 12.5-percent
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint09: Includes Transition Couplers For Use With The Stock Intercooler Pipes
- TechSpec Core Type: N/a
- TechSpec Core Height (in): 12.5
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- Installation Difficulty: 4
- SellingPoint10: Sleek Silver Or Stealth Black Intercooler Options Available
- TechSpec Note: Vehicles With Snowplow Mounts Installed May Require Trimming Of The Mounts To Fit This Intercooler.
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 25.7
- TechSpec Overall Height (in): 12.5
- TechSpec Applications: 2013-2018 Dodge Ram 6.7l Cummins
- TechSpec Includes: (1) Mishimoto Intercooler--(3) Front Air Diversion Panels--(1) Replacement Lower Fan Shroud--(2) Mounting Brackets W/ Rubber Isolators--(2) Silicone Boots With Duracore Technology--(4) Constant-tension T-bolt Clamps--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3
- TechSpec Outlet (in): 3
-
Features:
- Direct fit for the 2013–2018 Dodge Ram 6.7L Cummins
- Bar-and-plate construction with cast aluminum end tanks
- Lowers AITs by 12.5%
- 76.65% increase in external fin surface area
- 37.8% larger core volume than factory
- Includes new air ducts to divert air into the core & new lower fan shroud section
- End tanks strategically designed for optimal airflow
- Internal fins designed for maximum heat transfer with minimal pressure drop
- Includes transition couplers for use with the stock intercooler pipes
- Sleek Silver or Stealth Black intercooler options available
- Mishimoto Lifetime Warranty
- The Dodge Cummins straight-six is well known for its smooth power delivery and engine longevity. Mishimoto has released an intercooler for the 2013-2018 Dodge Ram 6.7L Cummins that is built to last, just like your truck. The Mishimoto Cummins intercooler is manufactured with robust cast aluminum end tanks and a dense bar-and-plate core. Our engineers developed an intercooler with increased core volume that can support substantial boost pressures and lower EGTs in your stock or modified truck. The Mishimoto Cummins performance intercooler features larger-than-factory intercooler outlets for increased flow. Included with this intercooler are two silicone boots with DuraCore technology and our signature Constant Tension T-bolt Clamps for consistent and reliable holding power. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts. Save time and money by upgrading to the full Mishimoto 2013-2018 Dodge Ram 6.7L Cummins intercooler and piping kit, which pairs this intercooler with the Mishimoto 2013-2018 Dodge Ram 6.7L Cummins pipe and boot kit, at a special discounted price. Whether your Cummins is stock or modified, trust Mishimoto and our line of Cummins performance parts to keep your Dodge cool. This Cummins performance intercooler is offered in Sleek Silver or Stealth Black, like all of our Cummins performance parts, and comes backed by the Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2017 - Ram 3500 | United States | Lone Star |
- Dodge 6.7L Cummins Intercooler Kit, 2013-2018
- Intercooler Kit, fits Dodge Ram 6.7L Cummins 2013-2018
- Product Attributes:
- SellingPoint04: 3-in Mandrel-bent Polished Aluminum Piping
- TechSpec Pipe Shape: N/a
- SellingPoint05: Bar-and-plate Construction With Cast Aluminum End Tanks
- SellingPoint06: 76.65-percent Increase In External Fin Surface Area
- SellingPoint07: 37.8-percent Larger Core Volume Than Factory
- SellingPoint01: Direct Fit For The 2013-2018 6.7l Cummins
- SellingPoint02: Includes Hot-side And Cold-side Intercooler Pipes And Boots
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 33
- SellingPoint03: Lowers Aits By 12.5-percent
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Includes New Air Ducts To Divert Air Into The Core And New Lower Fan Shroud Section
- SellingPoint09: End Tanks Strategically Designed For Optimal Airflow
- TechSpec Core Type: N/a
- TechSpec Core Height (in): 12.5
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- Installation Difficulty: 4
- SellingPoint10: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- TechSpec Note: Vehicles With Snowplow Mounts Installed May Require Trimming Of The Mounts To Fit This Intercooler.
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Includes Mishimoto Silicone Boots With Duracore Technology And Mishimoto Constant-tension T-bolt Clamps
- SellingPoint12: Sleek Silver Or Stealth Black Intercooler Options Available
- TechSpec Engine Codes: N/a
- SellingPoint13: Mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Core Length (in): 25.7
- TechSpec Overall Height (in): 12.5
- TechSpec Applications: 2013-2018 Dodge Ram 6.7l Cummins
- TechSpec Includes: (1) Mishimoto Intercooler--(3) Front Air Diversion Panels--(1) Replacement Lower Fan Shroud--(2) Mounting Brackets W/ Rubber Isolators--(2) Aluminum Pipes--(4) Silicone Boots With Duracore Technology--(8) Constant-tension T-bolt Clamps--mishimoto Lifetime
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3
- TechSpec Outlet (in): 3
-
Features:
- Direct fit for the 2013-2018 6.7L Cummins
- Includes hot-side and cold-side intercooler pipes and boots
- Lowers AITs by 12.5-percent
- 76.65-percent increase in external fin surface area
- Mishimoto Lifetime Warranty
- Mishimoto has released a performance intercooler kit for the 2013-2018 Dodge 6.7L Cummins. This kit includes everything you need to improve airflow, substantially decrease charge-air temperatures and support your truck at any power level. The first key component is the Mishimoto 6.7L Cummins intercooler piping kit. Our engineers have maximized airflow by eliminating restrictive bends, allowing for smooth and unimpeded airflow. The piping is constructed of mandrel-bent 3in aluminum for smooth flow and rugged durability. Also included are Mishimoto silicone boots with DuraCore technology and Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding force. Mishimoto DuraCore technology comprises the innermost layer of all Mishimoto diesel silicone boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of your boots and prevents leaks or blowouts. This package also includes the Mishimoto 6.7L Cummins intercooler. Extremely durable cast aluminum end tanks and a bar-and-plate core provide cool, dense air to your engine, with the reliability you need. With a 76.65-percent increase in external fin surface area, and a 37.8-percent larger core, this intercooler is proven to reduce intake air temps by 12.5-percent. All the components in this kit are engineered to last, just like your truck. Offered with either a Sleek Silver or Stealth Black core, the Mishimoto 6.7L Cummins intercooler kit, like all our Dodge Ram performance parts, is protected by the Mishimoto Lifetime Warranty. Whether your Cummins is stock or modified, trust Mishimoto and our line of Dodge Ram performance parts to keep your Dodge cool.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2017 - Ram 3500 | United States | Tradesman |
- Dodge Ram 6.7L Cummins Intercooler, 2013-2018
- Intercooler, fits Dodge 6.7L Cummins 2013-2018
- Product Attributes:
- SellingPoint04: 76.65-percent Greater Internal Volume Than Factory
- TechSpec Pipe Shape: N/a
- SellingPoint05: 37.8-percent Larger Core Volume Than Factory
- SellingPoint06: Includes New Air Ducts To Divert Air Into The Core And New Lower Fan Shroud Section
- SellingPoint07: End Tanks Strategically Designed For Optimal Airflow
- SellingPoint01: Direct Fit For The 2013-2018 Dodge Ram 6.7l Cummins
- SellingPoint02: Bar-and-plate Construction With Cast Aluminum End Tanks
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 33
- SellingPoint03: Lowers Ait By 12.5-percent
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- SellingPoint09: Includes Transition Couplers For Use With The Stock Intercooler Pipes
- TechSpec Core Type: N/a
- TechSpec Core Height (in): 12.5
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- SellingPoint10: Sleek Silver Or Stealth Black Intercooler Options Available
- TechSpec Note: Vehicles With Snowplow Mounts Installed May Require Trimming Of The Mounts To Fit This Intercooler.
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 25.7
- TechSpec Overall Height (in): 12.5
- TechSpec Applications: 2013-2018 Dodge Ram 6.7l Cummins
- TechSpec Includes: (1) Mishimoto Intercooler--(3) Front Air Diversion Panels--(1) Replacement Lower Fan Shroud--(2) Mounting Brackets W/ Rubber Isolators--(2) Silicone Boots With Duracore Technology--(4) Constant-tension T-bolt Clamps--mishimoto Lifetime Warranty
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3
- TechSpec Outlet (in): 3
-
Features:
- Direct fit for the 2013–2018 Dodge Ram 6.7L Cummins
- Bar-and-plate construction with cast aluminum end tanks
- Lowers AITs by 12.5%
- 76.65% increase in external fin surface area
- 37.8% larger core volume than factory
- Includes new air ducts to divert air into the core & new lower fan shroud section
- End tanks strategically designed for optimal airflow
- Internal fins designed for maximum heat transfer with minimal pressure drop
- Includes transition couplers for use with the stock intercooler pipes
- Sleek Silver or Stealth Black intercooler options available
- Mishimoto Lifetime Warranty
- The Dodge Cummins straight-six is well known for its smooth power delivery and engine longevity. Mishimoto has released an intercooler for the 2013-2018 Dodge Ram 6.7L Cummins that is built to last, just like your truck. The Mishimoto Cummins intercooler is manufactured with robust cast aluminum end tanks and a dense bar-and-plate core. Our engineers developed an intercooler with increased core volume that can support substantial boost pressures and lower EGTs in your stock or modified truck. The Mishimoto Cummins performance intercooler features larger-than-factory intercooler outlets for increased flow. Included with this intercooler are two silicone boots with DuraCore technology and our signature Constant Tension T-bolt Clamps for consistent and reliable holding power. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts. Save time and money by upgrading to the full Mishimoto 2013-2018 Dodge Ram 6.7L Cummins intercooler and piping kit, which pairs this intercooler with the Mishimoto 2013-2018 Dodge Ram 6.7L Cummins pipe and boot kit, at a special discounted price. Whether your Cummins is stock or modified, trust Mishimoto and our line of Cummins performance parts to keep your Dodge cool. This Cummins performance intercooler is offered in Sleek Silver or Stealth Black, like all of our Cummins performance parts, and comes backed by the Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | Turbocharged | 408 |
- Dodge 6.7L Cummins Intercooler Kit, 2013-2018
- Intercooler Kit, fits Dodge Ram 6.7L Cummins 2013-2018
- Product Attributes:
- SellingPoint04: 3-in Mandrel-bent Polished Aluminum Piping
- TechSpec Pipe Shape: N/a
- SellingPoint05: Bar-and-plate Construction With Cast Aluminum End Tanks
- SellingPoint06: 76.65-percent Increase In External Fin Surface Area
- SellingPoint07: 37.8-percent Larger Core Volume Than Factory
- SellingPoint01: Direct Fit For The 2013-2018 6.7l Cummins
- SellingPoint02: Includes Hot-side And Cold-side Intercooler Pipes And Boots
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 33
- SellingPoint03: Lowers Aits By 12.5-percent
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Includes New Air Ducts To Divert Air Into The Core And New Lower Fan Shroud Section
- SellingPoint09: End Tanks Strategically Designed For Optimal Airflow
- TechSpec Core Type: N/a
- TechSpec Core Height (in): 12.5
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- SellingPoint10: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- TechSpec Note: Vehicles With Snowplow Mounts Installed May Require Trimming Of The Mounts To Fit This Intercooler.
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Includes Mishimoto Silicone Boots With Duracore Technology And Mishimoto Constant-tension T-bolt Clamps
- SellingPoint12: Sleek Silver Or Stealth Black Intercooler Options Available
- TechSpec Engine Codes: N/a
- SellingPoint13: Mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Core Length (in): 25.7
- TechSpec Overall Height (in): 12.5
- TechSpec Applications: 2013-2018 Dodge Ram 6.7l Cummins
- TechSpec Includes: (1) Mishimoto Intercooler--(3) Front Air Diversion Panels--(1) Replacement Lower Fan Shroud--(2) Mounting Brackets W/ Rubber Isolators--(2) Aluminum Pipes--(4) Silicone Boots With Duracore Technology--(8) Constant-tension T-bolt Clamps--mishimoto Lifetime
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3
- TechSpec Outlet (in): 3
-
Features:
- Direct fit for the 2013-2018 6.7L Cummins
- Includes hot-side and cold-side intercooler pipes and boots
- Lowers AITs by 12.5-percent
- 76.65-percent increase in external fin surface area
- Mishimoto Lifetime Warranty
- Mishimoto has released a performance intercooler kit for the 2013-2018 Dodge 6.7L Cummins. This kit includes everything you need to improve airflow, substantially decrease charge-air temperatures and support your truck at any power level. The first key component is the Mishimoto 6.7L Cummins intercooler piping kit. Our engineers have maximized airflow by eliminating restrictive bends, allowing for smooth and unimpeded airflow. The piping is constructed of mandrel-bent 3in aluminum for smooth flow and rugged durability. Also included are Mishimoto silicone boots with DuraCore technology and Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding force. Mishimoto DuraCore technology comprises the innermost layer of all Mishimoto diesel silicone boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of your boots and prevents leaks or blowouts. This package also includes the Mishimoto 6.7L Cummins intercooler. Extremely durable cast aluminum end tanks and a bar-and-plate core provide cool, dense air to your engine, with the reliability you need. With a 76.65-percent increase in external fin surface area, and a 37.8-percent larger core, this intercooler is proven to reduce intake air temps by 12.5-percent. All the components in this kit are engineered to last, just like your truck. Offered with either a Sleek Silver or Stealth Black core, the Mishimoto 6.7L Cummins intercooler kit, like all our Dodge Ram performance parts, is protected by the Mishimoto Lifetime Warranty. Whether your Cummins is stock or modified, trust Mishimoto and our line of Dodge Ram performance parts to keep your Dodge cool.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | Turbocharged | 408 |
- Dodge Charger / Challenger Hemi Racing Thermostat, 2006-2012
- Racing Thermostat, fits Dodge Charger/Challenger 5.7L/6.1L/6.4L/6.2L Hemi 2006-2019
- Product Attributes:
- SellingPoint04: Mishimoto Lifetime Warranty
- SellingPoint05: N/a
- SellingPoint06: N/a
- SellingPoint07: N/a
- SellingPoint01: Fits The 2006-2019 Dodge Charger/challenger Hemi
- SellingPoint02: Activates At Lower Temperature So Coolant Flows Through System Earlier
- SellingPoint03: Allows For Cooler Engine Temperatures
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec OEM Activation Temperature (F): 203
- SellingPoint10: N/a
- TechSpec Note: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes:
- 5.7l Hemi--6.1l Hemi--6.4l Hemi
- 5.7l Hemi--6.1l Hemi--6.4l Hemi--6.2l Hemi S/c
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Applications:
- 2005-2019 Chrysler 300 5.7l/6.1l/6.4l--2007-2009 Chrysler Aspen 5.7l--2008-2019 Dodge Challenger 5.7l/6.1l/6.4l--2006-2019 Dodge Charger 5.7l/6.1l/6.4l--2004-2019 Dodge Durango 5.7l--2005-2008 Dodge Magnum 5.7l/6.1l--2003-2019 Dodge Ram 1500 5.7l--2003-20
- Chrysler 300 5.7l V8 2005-2023--chrysler 300 6.1l V8 2007-2010--chrysler 300 6.4l V8 2012-2014--chrysler Aspen 4.7l V8 2008--chrysler Aspen 5.7l V8 2007-2009--dodge Challenger 5.7l V8 2009-2023--dodge Challenger 6.1l V8 2008-2010--dodge Challenger 6.2l V8
- TechSpec Includes: (1) Mishimoto Thermostat--mishimoto Lifetime Warranty
- TechSpec Mishimoto Activation Temperature (F): 180
- Your high-performance Hemi needs a reliable and effective cooling system to extend engine life and perform at its absolute best.Mishimoto is proud to introduce a racing thermostat specifically designed for the 5.7L/6.1L/6.4L/6.2L Hemi engine.Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures.Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (180 F) compared to standard thermostats (203 F).This allows coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures.Whether your vehicle is stock, cammed, or blown, the Mishimoto racing thermostat will provide superior cooling efficiency to keep your vehicle on the road and out of the shop.As with all our products, this thermostat includes the Mishimoto lifetime warranty.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2017 - Ram 3500 | United States | Tradesman |
- Dodge Charger / Challenger Hemi Racing Thermostat, 2006-2012
- Racing Thermostat, fits Dodge Charger/Challenger 5.7L/6.1L/6.4L/6.2L Hemi 2006-2019
- Product Attributes:
- SellingPoint04: Mishimoto Lifetime Warranty
- SellingPoint15: N/a
- SellingPoint05: N/a
- SellingPoint06: N/a
- SellingPoint07: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint01: Fits The 2006-2019 Dodge Charger/challenger Hemi
- SellingPoint12: N/a
- TechSpec Engine Codes:
- 5.7l Hemi--6.1l Hemi--6.4l Hemi
- 5.7l Hemi--6.1l Hemi--6.4l Hemi--6.2l Hemi S/c
- SellingPoint02: Activates At Lower Temperature So Coolant Flows Through System Earlier
- SellingPoint13: N/a
- SellingPoint03: Allows For Cooler Engine Temperatures
- SellingPoint14: N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Applications:
- 2005-2019 Chrysler 300 5.7l/6.1l/6.4l--2007-2009 Chrysler Aspen 5.7l--2008-2019 Dodge Challenger 5.7l/6.1l/6.4l--2006-2019 Dodge Charger 5.7l/6.1l/6.4l--2004-2019 Dodge Durango 5.7l--2005-2008 Dodge Magnum 5.7l/6.1l--2003-2019 Dodge Ram 1500 5.7l--2003-20
- Chrysler 300 5.7l V8 2005-2023--chrysler 300 6.1l V8 2007-2010--chrysler 300 6.4l V8 2012-2014--chrysler Aspen 4.7l V8 2008--chrysler Aspen 5.7l V8 2007-2009--dodge Challenger 5.7l V8 2009-2023--dodge Challenger 6.1l V8 2008-2010--dodge Challenger 6.2l V8
- TechSpec Includes: (1) Mishimoto Thermostat--mishimoto Lifetime Warranty
- TechSpec OEM Activation Temperature (F): 203
- SellingPoint10: N/a
- TechSpec Mishimoto Activation Temperature (F): 180
- TechSpec Note: N/a
- Your high-performance Hemi needs a reliable and effective cooling system to extend engine life and perform at its absolute best.Mishimoto is proud to introduce a racing thermostat specifically designed for the 5.7L/6.1L/6.4L/6.2L Hemi engine.Mishimoto racing thermostats promote greater cooling efficiency by significantly decreasing high engine temperatures.Once the engine is fully warmed up, the Mishimoto low-temperature racing thermostat will open at a lower temperature (180 F) compared to standard thermostats (203 F).This allows coolant to flow through the engine sooner, thus reducing and maintaining cooler engine temperatures.Whether your vehicle is stock, cammed, or blown, the Mishimoto racing thermostat will provide superior cooling efficiency to keep your vehicle on the road and out of the shop.As with all our products, this thermostat includes the Mishimoto lifetime warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - Ram 3500 | Tradesman |
- 2013-2018 Ram 2500/3500 Radiator
- Performance Aluminum Radiator, fits Dodge 6.7L Cummins 2013-2018
- Product Attributes:
- SellingPoint04: Features A 2-in Thick, Three-row Core For Efficient Cooling Under High Loads
- SellingPoint05: Includes Magnetic Drain Plug To Capture Any Metallic Debris/fragments In Your Cooling System
- SellingPoint06: Mishimoto Lifetime Warranty
- SellingPoint07: N/a
- SellingPoint01: Direct Fit For The 2013-2018 Dodge Ram 6.7l Cummins
- SellingPoint02: Increases Coolant Capacity By 63-percent And Surface Area By 41-percent To Maximize Cooling
- TechSpec Overall Length (in): 33.5
- SellingPoint03: Durable Fully Aluminum Construction With Tig-welded End Tanks And Fittings
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Thickness (in): 1.88
- Installation Difficulty: 3
- SellingPoint10: N/a
- TechSpec Note: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 5
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- TechSpec Overall Width (ins): 2.75
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 26.75
- TechSpec Material: Aluminum
- TechSpec Applications: 2013-2018 Ram 2500 6.7l Cummins--2013-2018 Ram 3500 6.7l Cummins
- TechSpec Includes: Mishimoto Radiator--magnetic Drain Plug--(2) Transmission Cooler Fittings-- M6 X 1.0 - 16mm Bolt--(3) M6 X 1.0 - 14mm Bolts--(4) M6 X 1.0 - 12mm Bolts--(3) M6 Flat Washers--mishimoto Lifetime Warranty
- TechSpec Rows: 3
- TechSpec DPI: N/a
- TechSpec Fluid Capacity (gal): 7.94 .
- TechSpec Inlet (in): 1.61
- TechSpec Outlet (in): 1.61
-
Features:
- Direct fit for the 2013-2018 Dodge Ram 6.7L Cummins
- Increases coolant capacity by 63-percent and surface area by 41-percent to maximize cooling
- Durable fully aluminum construction with TIG-welded end tanks and fittings
- Features a 2in thick, three-row core for efficient cooling under high loads
- Mishimoto Lifetime Warranty
- The legendary reliability and power of the 6.7L Cummins equipped Dodge Ram has solidified it as one of the most popular trucks in the world for getting work done. But every legend has its weakness, and for the Dodge Ram, the stock radiator is one of them.The plastic end-tanks of the stock Ram radiator are prone to cracking and leaks over time. Add the increased stress and heat created by power-adding modifications and you have a recipe for disaster. But that's where Mishimoto can help.Our new 2013-2018 Ram 2500 / 3500 radiator is the ideal upgrade for any workhorse Cummins powered Ram. With a fully-aluminum, TIG-welded construction, this radiator is built as tough as your truck. A 63-percent increase in coolant capacity, and 41-percent larger surface area mean you can pile on the power and never worry about the heat.As with all of our products, this radiator is backed up by Mishimoto's Lifetime Warranty. Doesn't your Ram deserve a radiator worthy of legend?
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2017 - Ram 3500 | United States | Tradesman |
- Dodge Ram 6.7L Cummins Thermal Bypass Valve Kit, 2013-2018
- Thermal Bypass Valve Kit, fits Dodge Ram 6.7L Cummins 2013-2018
- Product Attributes:
- SellingPoint04: Increased Flow Over Stock Bypass Valve
- SellingPoint05: Included 160f Thermostat Opens Earlier Than Stock For Improved Cooling
- SellingPoint06: Includes Fully Serviceable Thermostat For Fast Warm-up In Cold Climates And Thermostat Bypass For Constant Cooling In Hot Climates
- SellingPoint07: Machined Cooling Fins For Added Heat Dissipation
- SellingPoint01: Direct-fit For 2013-2018 Dodge Ram 6.7l Cummins
- TechSpec Engine Codes: 6.7l Cummins
- SellingPoint02: Installs In Less Than 1 Hour
- SellingPoint03: Durable Cnc-machined Billet Aluminum Design
- TechSpec Chassis Codes: 2500--3500
- SellingPoint08: Durable Anodized Finish
- SellingPoint09: Mishimoto Lifetime Warranty
- TechSpec Applications: 2013-2018 Dodge Ram 2500 6.7l Cummins W/ 68-rfe--2013-2018 Dodge Ram 3500 6.7l Cummins W/ 68-rfe----2013-2018 Dodge Ram 2500 6.7l Cummins W/ Aisin As69rc--2013-2018 Dodge Ram 3500 6.7l Cummins W/ Aisin As69rc
- TechSpec Includes: (1) Cnc-machined Billet Aluminum Thermal Bypass Valve--(1) Removable Thermostat--(1) Removable Thermostat Bypass W/ Installation Hardware--(2) 3/4-inch X 16 Quick-disconnect Transmission Line Fittings--(1) Assembly Notecard--mishimoto Lifetime Warranty
- TechSpec OEM Activation Temperature (F): 170
- TechSpec Mishimoto Activation Temperature (F): 160
- TechSpec Note: Mishimoto Does Not Recommend Customers In Cold Climates Install The Thermostat Bypass To Avoid Overcooling Of The Transmission Fluid
- Prop 65 (C, R or CR): Cr
-
Features:
- Direct-fit for 2013-2018 Dodge Ram 6.7L Cummins
- Increased flow over stock bypass valve
- Included 160 F thermostat opens earlier than stock for improved cooling
- Includes fully serviceable thermostat for fast warm-up in cold climates and thermostat bypass for constant cooling in hot climates
- Mishimoto Lifetime Warranty
- The transmission is the backbone of your 2013?2018 Dodge Ram 6.7L Cummins. It's responsible for transmitting up to 930 lb-ft of torque from the engine to the wheels. That much power generates a lot of heat and if that heat isn?t dissipated it can destroy your transmission. The transmission cooler does a good job of keeping transmission fluid temperatures in check, but only if the fluid can reach it. The stock cooling system of both the 68-RFE and Aisin AS69RC utilize an in-line thermal bypass valve that controls the flow of fluid to the transmission cooler. The purpose of this valve is to prevent transmission fluid from flowing to the cooler until it reaches operating temperature. The thermostat inside this valve is prone to failure, however, and when that happens, the fluid never flows to the cooler and the transmission can overheat. That?s why Mishimoto has developed an improved thermal bypass valve kit for your 2013?2018 Dodge Ram 6.7L Cummins. Our CNC-machined aluminum thermal bypass valve not only looks better than the stock unit, but it performs better too. The Mishimoto thermal bypass valve utilizes a replaceable thermostat that is more durable than the stock thermostat and opens about 10 F earlier. This allows fluid to flow to the cooler sooner, without over cooling. For owners in hot climates, the Mishimoto valve includes a bypass that allows full flow to the transmission cooler, regardless of temperature. The bypass can be easily swapped out with only a wrench for summer or winter driving. The Mishimoto thermal bypass valve flows better in both configurations than the stock valve for more effective cooling. Cooling fins machined into the valve body add even more heat dissipation. This 2013?2018 Dodge Ram 6.7L Cummins Thermal Bypass Valve Kit is built to last a lifetime with a durable black anodized finish and our Mishimoto Lifetime Guarantee.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Dodge 6.7L Cummins Intercooler Kit, 2013-2018
- Intercooler Kit, fits Dodge Ram 6.7L Cummins 2013-2018
- Product Attributes:
- SellingPoint04: 3-in Mandrel-bent Polished Aluminum Piping
- TechSpec Pipe Shape: N/a
- SellingPoint05: Bar-and-plate Construction With Cast Aluminum End Tanks
- SellingPoint06: 76.65-percent Increase In External Fin Surface Area
- SellingPoint07: 37.8-percent Larger Core Volume Than Factory
- SellingPoint01: Direct Fit For The 2013-2018 6.7l Cummins
- SellingPoint02: Includes Hot-side And Cold-side Intercooler Pipes And Boots
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 33
- SellingPoint03: Lowers Aits By 12.5-percent
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Includes New Air Ducts To Divert Air Into The Core And New Lower Fan Shroud Section
- SellingPoint09: End Tanks Strategically Designed For Optimal Airflow
- TechSpec Core Type: N/a
- TechSpec Core Height (in): 12.5
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- SellingPoint10: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- TechSpec Note: Vehicles With Snowplow Mounts Installed May Require Trimming Of The Mounts To Fit This Intercooler.
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Includes Mishimoto Silicone Boots With Duracore Technology And Mishimoto Constant-tension T-bolt Clamps
- SellingPoint12: Sleek Silver Or Stealth Black Intercooler Options Available
- TechSpec Engine Codes: N/a
- SellingPoint13: Mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Core Length (in): 25.7
- TechSpec Overall Height (in): 12.5
- TechSpec Applications: 2013-2018 Dodge Ram 6.7l Cummins
- TechSpec Includes: (1) Mishimoto Intercooler--(3) Front Air Diversion Panels--(1) Replacement Lower Fan Shroud--(2) Mounting Brackets W/ Rubber Isolators--(2) Aluminum Pipes--(4) Silicone Boots With Duracore Technology--(8) Constant-tension T-bolt Clamps--mishimoto Lifetime
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3
- TechSpec Outlet (in): 3
-
Features:
- Direct fit for the 2013-2018 6.7L Cummins
- Includes hot-side and cold-side intercooler pipes and boots
- Lowers AITs by 12.5-percent
- 76.65-percent increase in external fin surface area
- Mishimoto Lifetime Warranty
- Mishimoto has released a performance intercooler kit for the 2013-2018 Dodge 6.7L Cummins. This kit includes everything you need to improve airflow, substantially decrease charge-air temperatures and support your truck at any power level. The first key component is the Mishimoto 6.7L Cummins intercooler piping kit. Our engineers have maximized airflow by eliminating restrictive bends, allowing for smooth and unimpeded airflow. The piping is constructed of mandrel-bent 3in aluminum for smooth flow and rugged durability. Also included are Mishimoto silicone boots with DuraCore technology and Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding force. Mishimoto DuraCore technology comprises the innermost layer of all Mishimoto diesel silicone boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of your boots and prevents leaks or blowouts. This package also includes the Mishimoto 6.7L Cummins intercooler. Extremely durable cast aluminum end tanks and a bar-and-plate core provide cool, dense air to your engine, with the reliability you need. With a 76.65-percent increase in external fin surface area, and a 37.8-percent larger core, this intercooler is proven to reduce intake air temps by 12.5-percent. All the components in this kit are engineered to last, just like your truck. Offered with either a Sleek Silver or Stealth Black core, the Mishimoto 6.7L Cummins intercooler kit, like all our Dodge Ram performance parts, is protected by the Mishimoto Lifetime Warranty. Whether your Cummins is stock or modified, trust Mishimoto and our line of Dodge Ram performance parts to keep your Dodge cool.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2017 - Ram 3500 | L | - | 6 Cyl 6.7L | Turbocharged | 408 |
- Dodge 6.7L Cummins Intercooler Kit, 2013-2018
- Intercooler Kit, fits Dodge Ram 6.7L Cummins 2013-2018
- Product Attributes:
- SellingPoint04: 3-in Mandrel-bent Polished Aluminum Piping
- TechSpec Pipe Shape: N/a
- SellingPoint05: Bar-and-plate Construction With Cast Aluminum End Tanks
- SellingPoint06: 76.65-percent Increase In External Fin Surface Area
- SellingPoint07: 37.8-percent Larger Core Volume Than Factory
- SellingPoint01: Direct Fit For The 2013-2018 6.7l Cummins
- SellingPoint02: Includes Hot-side And Cold-side Intercooler Pipes And Boots
- TechSpec Maximum Recommended Horsepower: N/a
- TechSpec Overall Length (in): 33
- SellingPoint03: Lowers Aits By 12.5-percent
- TechSpec Centerline Radius: N/a
- TechSpec Chassis Codes: N/a
- TechSpec Pipe Length: N/a
- SellingPoint08: Includes New Air Ducts To Divert Air Into The Core And New Lower Fan Shroud Section
- SellingPoint09: End Tanks Strategically Designed For Optimal Airflow
- TechSpec Core Type: N/a
- TechSpec Core Height (in): 12.5
- TechSpec Maximum Recommended Boost Pressure (PSI): N/a
- TechSpec Core Thickness (in): N/a
- TechSpec Pipe Diameter: N/a
- Installation Difficulty: 4
- SellingPoint10: Internal Fins Designed For Maximum Heat Transfer With Minimal Pressure Drop
- TechSpec Note: Vehicles With Snowplow Mounts Installed May Require Trimming Of The Mounts To Fit This Intercooler.
- TechSpec Installation Notes: 27 In-lbs (3nm) Recommended For All T-bolt And Constant-tension T-bolt Clamps. These Clamps Have An Operating Range Of 18-35 In-lbs (2-4nm). Do Not Exceed The Maximum Torque Rating Of 35 In-lbs (4nm).
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 4
- SellingPoint11: Includes Mishimoto Silicone Boots With Duracore Technology And Mishimoto Constant-tension T-bolt Clamps
- SellingPoint12: Sleek Silver Or Stealth Black Intercooler Options Available
- TechSpec Engine Codes: N/a
- SellingPoint13: Mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Core Length (in): 25.7
- TechSpec Overall Height (in): 12.5
- TechSpec Applications: 2013-2018 Dodge Ram 6.7l Cummins
- TechSpec Includes: (1) Mishimoto Intercooler--(3) Front Air Diversion Panels--(1) Replacement Lower Fan Shroud--(2) Mounting Brackets W/ Rubber Isolators--(2) Aluminum Pipes--(4) Silicone Boots With Duracore Technology--(8) Constant-tension T-bolt Clamps--mishimoto Lifetime
- TechSpec Weight (lbs): N/a
- TechSpec Inlet (in): 3
- TechSpec Outlet (in): 3
-
Features:
- Direct fit for the 2013-2018 6.7L Cummins
- Includes hot-side and cold-side intercooler pipes and boots
- Lowers AITs by 12.5-percent
- 76.65-percent increase in external fin surface area
- Mishimoto Lifetime Warranty
- Mishimoto has released a performance intercooler kit for the 2013-2018 Dodge 6.7L Cummins. This kit includes everything you need to improve airflow, substantially decrease charge-air temperatures and support your truck at any power level. The first key component is the Mishimoto 6.7L Cummins intercooler piping kit. Our engineers have maximized airflow by eliminating restrictive bends, allowing for smooth and unimpeded airflow. The piping is constructed of mandrel-bent 3in aluminum for smooth flow and rugged durability. Also included are Mishimoto silicone boots with DuraCore technology and Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding force. Mishimoto DuraCore technology comprises the innermost layer of all Mishimoto diesel silicone boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of your boots and prevents leaks or blowouts. This package also includes the Mishimoto 6.7L Cummins intercooler. Extremely durable cast aluminum end tanks and a bar-and-plate core provide cool, dense air to your engine, with the reliability you need. With a 76.65-percent increase in external fin surface area, and a 37.8-percent larger core, this intercooler is proven to reduce intake air temps by 12.5-percent. All the components in this kit are engineered to last, just like your truck. Offered with either a Sleek Silver or Stealth Black core, the Mishimoto 6.7L Cummins intercooler kit, like all our Dodge Ram performance parts, is protected by the Mishimoto Lifetime Warranty. Whether your Cummins is stock or modified, trust Mishimoto and our line of Dodge Ram performance parts to keep your Dodge cool.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2017 - Ram 3500 | United States | Tradesman |
Showing 1 - 10 of 25 products
Loading...