Image
Product
Price
- Full-Flow Thermal Bypass Valve Kit, Fits RAM 6.7L Cummins 2019+
- Full-Flow Thermal Bypass Valve Kit, Fits RAM 6.7L Cummins 2019+
- Product Attributes:
- SellingPoint04: Equipped With A Bypass For Uninterrupted Cooling In Hot Weather Conditions
- SellingPoint05: Installs In Less Than 1 Hour
- SellingPoint06: Integrated Heat-sink Fins Provide Unique Styling And Added Heat Dissipation
- TechSpec Overall Length (in): 3.54
- SellingPoint07: Durable Cnc-machined Billet Aluminum Design
- SellingPoint01: Direct Fit For 2019+ Ram 6.7l Cummins
- SellingPoint02: Helps Extend Transmission Life And Prevents Overheating
- SellingPoint03: Features A Fully Serviceable Thermostat For Rapid Warm-up In Cold Weather
- TechSpec Chassis Codes: Ram 2500--ram 3500
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): N/a
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 1
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: 6.7l Cummins
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): 2.91
- TechSpec Fluid Capacity (qts): N/a
- TechSpec Caution: N/a
- TechSpec Applications: 2019+ Ram 2500 I6 6.7l--2019+ Ram 3500 I6 6.7l
- TechSpec Includes: (1) Mishimoto Full Flow Thermal Bypass Valve--(2) O-rings--(2) Dowty Seals--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: N/a
- TechSpec Inlet: M20x1.5
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): 1.3
- The transmission is the backbone of your RAM. It’s responsible for transmitting large amounts of torque from your 6.7L Cummins powerplant, and that torque generates heat. If that heat isn’t dissipated, it can destroy your transmission. The transmission cooler does a good job of keeping trans fluid temperatures in check, but only if the fluid can reach it. The stock cooling system of the Aisin AS69RC utilizes an in-line thermal bypass valve that controls fluid flow to the transmission cooler. The purpose of this valve is to prevent transmission fluid from flowing to the cooler until it reaches operating temperature. The thermostat inside this valve is prone to failure, however, and when that happens, the fluid never flows to the cooler, and the transmission can overheat. That's why Mishimoto has developed a full-flow thermal bypass valve upgrade for your 2019+ RAM 6.7L Cummins. Our CNC-machined aluminum thermal bypass valve not only looks better than the stock unit, but it performs better too. This Mishimoto thermal bypass valve eliminates the internal thermostat, providing full fluid flow to the transmission cooler in all running conditions. This setup is ideal for owners in warm climates, those performing heavy towing, and trucks needing the best possible cooling efficiency for their transmission. The Mishimoto full-flow thermal bypass valve features strategically machined internal passages, providing improved flow over the stock valve for more effective cooling. In addition, cooling fins machined into the valve body add even more heat dissipation. This 2019+ RAM 6.7L Cummins Thermal Bypass Full Flow Valve Kit is built to last a lifetime with a durable CNC-machined billet aluminum design and our Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- FACTORY-FIT BOOT KIT, FITS RAM 6.7L CUMMINS 2019+
- FACTORY-FIT BOOT KIT, FITS RAM 6.7L CUMMINS 2019+
- Product Attributes:
- SellingPoint04: Includes High-quality Constant Tension T-bolt Clamps
- SellingPoint05: Mishimoto Lifetime Warranty
- SellingPoint06: N/a
- SellingPoint07: N/a
- SellingPoint01: Direct Fit For The 2019+ Ram 6.7l Cummins
- TechSpec Maximum Temperature Rating: N/a
- SellingPoint02: Five Layers Of 100% Silicone For Maximum Durability And Blowout Prevention
- SellingPoint03: Duracore™ Technology Provides Superior Resistance To Heat, Pressure, Fuel, And Oil
- TechSpec Fits: 2019 Ram Cummins 6.7l
- TechSpec Length (Inches): N/a
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outer Diameter (in): N/a
- SellingPoint10: N/a
- TechSpec Note: N/a
- SellingPoint15: N/a
- TechSpec Inner Diameter (in): N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Purchase Includes: (2) Hot-side Duracore Boots-- (2) Cold-side Duracore Boots-- (8) Constant Tension T-bolt Clamps--mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Material: N/a
- TechSpec Applications: N/a
- TechSpec Coupler Style: N/a
- TechSpec Interior Material: N/a
-
Features:
- Direct fit for the 2019+ RAM 6.7L Cummins
- Five layers of 100% silicone for maximum durability and blowout prevention
- DuraCore™ technology provides superior resistance to heat, pressure, fuel, and oil
- Includes high-quality constant tension T-bolt clamps
- Mishimoto Lifetime Warranty
- Mishimoto is proud to expand their Cummins performance line to include a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 2019+ 6.7L Dodge Cummins. High-powered Cummins vehicles require Cummins performance products, which is why our boot kits are manufactured using DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this Cummins performance kit includes Mishimoto Constant Tension T-bolt Clamps for accurate and consistent holding power. The Mishimoto Cummins performance boot kit maintains factory fitment and like all of our Cummins performance parts, is protected by the signature Mishimoto Lifetime Warranty
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Aluminum Transmission Pan, fits Dodge Ram 6.7L Cummins 2007.5+
- Aluminum Transmission Pan, fits Dodge Ram 6.7L Cummins 2007.5+
- Product Attributes:
- SellingPoint04: Bolt Retainers Hold Fasteners In Place For Easy Installation
- SellingPoint05: Internal Baffles Reduce Sloshing And Enhance Heat Dissipation For Smoother, More Efficient Transmission Operation
- SellingPoint06: 1/8-inch Npt Port Makes Adding A Temp Sensor Fast And Easy
- TechSpec Overall Length (in): N/a
- SellingPoint07: Precision-machined Sealing Surface Helps Prevent Leaks
- SellingPoint01: Direct Fit For 2007.5+ Dodge Ram 6.7l Cummins
- SellingPoint02: Durable Cast-aluminum Construction For Long-lasting Performance
- SellingPoint03: Increases Fluid Capacity By 2.6 Quarts Over The Stock Transmission Pan For More Cooling Capacity
- TechSpec Chassis Codes: N/a
- SellingPoint08: Magnetic Drain Plug Makes Servicing Your Transmission A Breeze
- SellingPoint09: Gunmetal Gray Powder Coat Finish Adds Style And Function To Your Truck’s Undercarriage
- TechSpec Outlet: N/a
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): N/a
- SellingPoint10:
- Mishimoto Lifetime Warranty
- Patent Number Pat001135
- TechSpec Note: N/a
- TechSpec Installation Notes: Drain Plug Torque Spec: 15 Lb-ft----a Pan Gasket Is Not Included With This Product. Mishimoto Recommends Replacing It With Oem Part #68425659aa To Ensure Leak-free Operation.
- SellingPoint15: N/a
- Install Difficulty: 1
- SellingPoint11: Mishimoto Lifetime Warranty
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): N/a
- TechSpec Fluid Capacity (qts): 2.6 (pan)/ 8.1 (total 4x2)/ 9.1 (total 4x4)
- TechSpec Caution: N/a
- TechSpec Applications: 2007.5+ Dodge Ram 6.7l Cummins 68rfe
- TechSpec Includes: (1) Cast Aluminum Transmission Pan--(1) Magnetic Drain Plug--(15) Silicone Bolt Retainers--(15) Socket Head Cap Screws W/ Washers--(1) 1/8-in Npt Plug--mishimoto Lifetime Warranty
- TechSpec Rows: N/a
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): N/a
- This Mishimoto Aluminum Transmission Pan is a direct-fit, high-performance upgrade for your 2007.5+ Dodge Ram 6.7L Cummins. Cast from high-quality aluminum and powder coated Gunmetal Gray, our transmission pan is a robust and long-lasting upgrade for your vehicle's transmission. With a sleek design and bottom ribs, this pan not only adds to the overall aesthetic of your truck but also provides improved cooling performance.----This transmission pan features internal baffles that reduce sloshing and enhance heat dissipation, resulting in smoother transmission performance. Our casting features a precision-machined sealing surface, ready to accept either a factory-style gasket or sealant of your choice (not included). Additionally, the Mishimoto 2007.5+ Dodge Ram 6.7L Cummins Aluminum Transmission Pan adds an extra 2.6 quarts of ATF to help maintain optimal transmission operation.----Fed up with the frustration of trying to hold up a transmission pan with one hand while threading the fasteners in with the other? Mishimoto has you covered with pre-installed bolt retainers that hold the fasteners in the pan, allowing you to easily thread the bolts without dropping them on the ground, your head, or worse, that pan of nasty transmission fluid you just drained. Additionally, our pan comes equipped with a magnetic drain plug for easy draining and a 1/8-inch NPT port and plug for temperature sensors to make servicing your transmission and monitoring temperatures a breeze.----This direct-fit upgrade offers affordable durability and helps maintain smooth transmission operation, ensuring a long life for your transmission. Like all Mishimoto products, this transmission pan is backed by the Mishimoto Lifetime Warranty.
This Part Fits the Following OEM/Substitute Numbers:
5013681AA, MH68RFE-A
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2023 - Ram 2500 | L | - | DIESEL | 6 Cyl 6.7L | 408 |
- Ram 6.7L Cummins Top Heater Hose Upgrade 2007.5+
- Ram 6.7L Cummins Top Heater Hose Upgrade 2007.5+
- Product Attributes:
- SellingPoint04: Pre-installed Thread Sealant For Leak-free Connection
- SellingPoint05: Includes Everything Needed For A Quick And Easy Installation
- SellingPoint06: Mishimoto Lifetime Warranty
- SellingPoint07: N/a
- TechSpec Fitting Angle: N/a
- SellingPoint01: Direct Fit For Ram 6.7l Cummins 2007.5+
- SellingPoint02: Replaces The Leak-prone Quick-disconnect Heater Hose, Ensuring Reliable Coolant Flow
- SellingPoint03: Features O-ring-less -10an Connection For Improved Reliability
- TechSpec MaxFluidTemperature (F): N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: -10an
- TechSpec Inner Material: N/a
- TechSpec Max Fluid Pressure (PSI): N/a
- SellingPoint10: N/a
- TechSpec Note: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- Install Difficulty: 1
- SellingPoint12: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Includes: (1) Stainless-steel An Adapter--(1) -10an Push Lock Fitting--(1) Worm Gear Clamp--(1) Mishimoto Lifetime Warranty
- TechSpec Inlet: 1/2-14 Npt
- TechSpec Compatible Fluids: N/a
- Elevate your RAM 6.7L Cummins 2007.5+ cooling system with the Mishimoto Top Heater Hose Upgrade. Specifically designed to replace the leak-prone heater hose quick-disconnect at the engine, this upgrade features an O-ring-less, -10AN connection for improved reliability. Say goodbye to coolant leaks and hello to seamless coolant flow.----With easy installation and a perfect fit, the Mishimoto 2007.5+ RAM 6.7L Cummins Top Heater Hose Upgrade is a must-have for Cummins enthusiasts looking to enhance their cooling system's durability. Like all our RAM 6.7L Cummins products, this top heater hose upgrade is backed by the Mishimoto Lifetime Warranty.
This Part Fits the Following OEM/Substitute Numbers:
52014739AG, 55056711AC, 55056966AA, 68005253AA, 800-416
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2023 - Ram 2500 | L | - | DIESEL | 6 Cyl 6.7L | Limited Longhorn | 408 |
- Performance Transmission Cooler, Fits RAM 6.7L Cummins 2019+
- Performance Transmission Cooler, Fits RAM 6.7L Cummins 2019+
- Product Attributes:
- SellingPoint04: High-efficiency Internal Fins Maximize Cooling For Lower System Temps
- SellingPoint05: Bolt-on Mounting Tabs Allow Installation With Radiator And A/c Condenser In Place
- SellingPoint06: Includes Oem-quality Quick-disconnect Fittings For Easy Install
- TechSpec Overall Length (in): 38.78
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Direct Fit For 2019+ Ram 6.7l Cummins
- SellingPoint02: 64% Thicker Core With 3 Additional Rows For Maximum Efficiency
- SellingPoint03: Tube-and-fin Core Optimizes Cooling While Reducing Restriction
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): 7.13
- TechSpec Core Thickness (in): 1.26
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 34.65
- TechSpec Overall Height (in): 8.58
- TechSpec Fluid Capacity (qts): 1.33
- TechSpec Caution: N/a
- TechSpec Applications: Ram 2500 6.4l V8 2019+--ram 3500 6.4l V8 2019+--ram 2500 6.7l L6 2019+--ram 3500 6.7l L6 2019+
- TechSpec Includes: (1) Mishimoto Performance Transmission Cooler--(2) Quick-disconnect Fittings--(2) Mounting Tabs--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: 17
- TechSpec Inlet: N/a
- TechSpec Core Construction: Tube-and-fin
- TechSpec Overall Width (in): 2.36
- There's no greater enemy for a transmission than heat. Whether your 2019+ RAM 6.7L Cummins is a dedicated tow vehicle, hardworking fleet truck, or a daily driver with a liking for the dragstrip, you need to ensure that your transmission runs cool. Luckily, Mishimoto has developed a direct-fit transmission cooler to do just that.--Our 2019+ RAM 6.7L Cummins transmission cooler utilizes a tube-and-fin core with internal fins to balance flow with efficient cooling. Our transmission cooler reduces restriction over stock, while adding cooling performance. With a massive 64 percent thicker core and an additional 3 rows of fins, this trans cooler is a huge improvement over the stock unit. To make even better use of that enlarged core, the Mishimoto transmission cooler utilizes fins within the tubes to not only add more cooling surface area, but also ensure more of the fluid contacts the tube, leading to better cooling efficiency. All these improvements translate to lower inlet temperatures over stock for a cooler transmission when you need it most.--Installation of the Mishimoto 2019+ RAM 6.7L Cummins transmission cooler requires no cutting or other modifications and, thanks to the bolt-on mounting tabs, your radiator and A/C condenser can stay in place, reducing the time and cost of installation. Like all Mishimoto products, this transmission cooler is backed up by our Lifetime Warranty with Accident Protection for worry free cooling as long as you own it.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 2500 | V | 6424 | 8 Cyl 6.4L | 392 |
- Wheel Spacers, 8X165.1, 121.3mm Center Bore, M14 X 1.5, 50mm Thick, Black
- Borne Off-Road 8X165.1 Wheel Spacers, Fits RAM 6.7L Cummins 2012+
- Product Attributes:
- SellingPoint04: Hub-centric Design Provides A Direct Extension Of The Axle Hub, Ensuring Precise Wheel Fitment, And Smooth, Safe Driving
- SellingPoint05: High-strength Grade-12.9 Steel Studs And Lug Nuts Securely Mount The Spacer And Wheel To The Hub
- TechSpec Overall Height (Inches): N/a
- SellingPoint06: Purchase Includes One Pair Of Wheel Spacers And All Necessary Hardware For Installation
- SellingPoint07: Available In Multiple Bolt-patterns, Center Bores, And Thicknesses
- SellingPoint01: Direct Fit For 2012+ Ram 6.7l Cummins
- SellingPoint02: Also Fit Vehicles With 8x165.1 Bolt Pattern, M14x1.5 Studs, And 121.3 Mm Center Bore
- SellingPoint03: Forged 6061-t6 Aluminum Construction Provides The Perfect Blend Of Lightness And Strength
- TechSpec Length (Inches): N/a
- TechSpec Minimum Yield Strength: N/a
- SellingPoint08: Durable Anodized Finish Prevents Corrosion
- SellingPoint09: Designed Specifically To Allow Use Of Hubcentric Wheel Spacers On Both Front And Rear Axles
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Wheel Spacers Are Sold In Pairs------compatible With Srw Trucks Only, Does Not Fit Drw------please Follow Safe Installation Practices By Referencing Our Installation Guide----be Sure To Take Proper Vehicle Measurements To Ensure The Thread Pattern, Center
- TechSpec Installation Notes: N/a
- TechSpec Thread Size: M14x1.5
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: 6061-aluminum
- TechSpec Diameter (Inches): N/a
- TechSpec Applications: Ram 2500 6.7l Cummins 2012+--ram 3500 6.7l Cummins 2012+
- TechSpec Includes: (2) Aluminum Wheel Spacers--(16) M14x1.5 Lug Nuts--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): N/a
-
Features:
- Direct fit for 2012+ RAM 6.7L Cummins
- Also fit vehicles with 8x165.1 bolt pattern, M14x1.5 studs, and 121.3 mm center bore
- Forged 6061-T6 aluminum construction provides the perfect blend of lightness and strength
- Hub-centric design provides a direct extension of the axle hub, ensuring precise wheel fitment, and smooth, safe driving
- High-strength grade-12.9 steel studs and lug nuts securely mount the spacer and wheel to the hub
- Purchase includes one pair of wheel spacers and all necessary hardware for installation
- Available in multiple bolt-patterns, center bores, and thicknesses
- Durable anodized finish prevents corrosion
- Designed specifically to allow use of hubcentric wheel spacers on both front and rear axles
- Mishimoto Lifetime Warranty
- Wheel spacers are a great way to create brake clearance, add track width, prevent tire rub, and provide ideal wheel fitment on your vehicle. Borne Off-Road now offers a complete catalog of wheel spacers for a variety of common thread patterns, center bores, and thicknesses.----Quality material selection, precise engineering, and meticulous manufacturing are critical elements to creating our incredibly robust products, and our wheel spacers are no different. Each spacer is forged from 6061-T6 aluminum. This material offers a perfect blend of strength and lightness, both are extremely vital in this application. Our spacers feature grade-12.9 steel studs and lug nuts, ensuring a safe and secure installation. Borne Off-Road’s hub-centric design provides a direct extension of the axle hub for precise wheel fitment on both front and rear axels, reduced load on the hardware, and ensures safe and smooth driving.----Borne Off-Road wheel spacers feature a black or blue anodized finish to ensure protection against corrosion. Each kit contains two wheel spacers with pre-installed studs and all hardware necessary for installation. As with all our products, this wheel spacer kit includes our signature Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Ram 6.7L Cummins Aluminum Radiator, 2019+
- Performance Aluminum Radiator, fits Ram 6.7L Cummins 2019+
- Product Attributes:
- SellingPoint04: Includes Bushing Replacements For Old Or Worn Out Bushings
- SellingPoint05: Strutted Tubes Throughout For Maximum Rigidity And Durability
- SellingPoint06: Louvered Fins For Improved Heat Dissipation
- SellingPoint07: Pair With Mishimoto Silicone Coolant Hose Kit For Even Greater Cooling System Protection
- SellingPoint01: Direct Fit For The 2019+ Ram 6.7l Cummins
- SellingPoint02: Increases Fluid Capacity By 28% To Maximize Cooling
- TechSpec Overall Length (in): 43.3
- SellingPoint03: Durable Fully Aluminum Construction With Tig-welded End Tanks And Fittings
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Core Height (in): 20.76
- TechSpec Core Thickness (in): 1.57
- SellingPoint10: N/a
- TechSpec Note: Includes Magnetic Drain Plug To Capture Any Metallic Debris/fragments In Your Cooling System--will Not Fit Ho Models. Core Fitment Is Designed For A 34” Radiator Core; If Your Vehicle Has A 39” Wide Core, This Radiator Will Not Be Compatible.
- SellingPoint15: N/a
- Install Difficulty: 5
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Overall Width (ins): 7.04
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 33.39
- TechSpec Overall Height (in): 21.48
- TechSpec Material: Aluminum
- TechSpec Applications: Ram 2500 6.7l L6 2019+--ram 3500 6.7l L6 2019+--ram 4500 6.7l L6 2019+--ram 5500 6.7l L6 2019+
- TechSpec Includes: (1) Mishimoto Performance Radiator--(2) Replacement Lower Radiator Bushings-- Mishimoto Lifetime Warranty
- TechSpec Fluid Capacity (gal): 1.2
- TechSpec Inlet (in): 2
- TechSpec Outlet (in): 2
- The legendary reliability and power of the 6.7L Cummins equipped Dodge Ram has solidified it as one of the most popular trucks in the world for getting work done. But every legend has its weakness, and for the Dodge Ram, the stock radiator is one of them. The plastic end-tanks of the stock Ram radiator are prone to cracking and leaking over time. Add the increased stress and heat created by hauling heavy workloads, and you have a recipe for disaster. But that's where Mishimoto can help. Our new 2019+ Ram 2500/3500 radiator is the ideal upgrade for any workhorse Cummins powered Ram. With a fully aluminum, TIG-welded construction, the Mishimoto radiator is as tough as your truck. A 28% increase in fluid capacity means you can pile on the power and never worry about the heat. As with all our products, this radiator is backed up by Mishimoto's Lifetime Warranty. Doesn't your Ram deserve a radiator worthy of legend?
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
- Wheel Spacers, 8X165.1, 121.3mm Center Bore, M14 X 1.5, 38.1mm Thick, Black
- Borne Off-Road 8X165.1 Wheel Spacers, Fits RAM 6.7L Cummins 2012+
- Product Attributes:
- SellingPoint04: Hub-centric Design Provides A Direct Extension Of The Axle Hub, Ensuring Precise Wheel Fitment, And Smooth, Safe Driving
- SellingPoint05: High-strength Grade-12.9 Steel Studs And Lug Nuts Securely Mount The Spacer And Wheel To The Hub
- TechSpec Overall Height (Inches): N/a
- SellingPoint06: Purchase Includes One Pair Of Wheel Spacers And All Necessary Hardware For Installation
- SellingPoint07: Available In Multiple Bolt-patterns, Center Bores, And Thicknesses
- SellingPoint01: Direct Fit For 2012+ Ram 6.7l Cummins
- SellingPoint02: Also Fit Vehicles With 8x165.1 Bolt Pattern, M14x1.5 Studs, And 121.3 Mm Center Bore
- SellingPoint03: Forged 6061-t6 Aluminum Construction Provides The Perfect Blend Of Lightness And Strength
- TechSpec Length (Inches): N/a
- TechSpec Minimum Yield Strength: N/a
- SellingPoint08: Durable Anodized Finish Prevents Corrosion
- SellingPoint09: Designed Specifically To Allow Use Of Hubcentric Wheel Spacers On Both Front And Rear Axles
- TechSpec Maximum Pressure (PSI): N/a
- TechSpec Ultimate Tensile Strength: N/a
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: Wheel Spacers Are Sold In Pairs------compatible With Srw Trucks Only, Does Not Fit Drw------please Follow Safe Installation Practices By Referencing Our Installation Guide----be Sure To Take Proper Vehicle Measurements To Ensure The Thread Pattern, Center
- TechSpec Installation Notes: N/a
- TechSpec Thread Size: M14x1.5
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Maximum Temperature (F): N/a
- TechSpec Material: 6061-aluminum
- TechSpec Diameter (Inches): N/a
- TechSpec Applications: Ram 2500 6.7l Cummins 2012+--ram 3500 6.7l Cummins 2012+
- TechSpec Includes: (2) Aluminum Wheel Spacers--(16) M14x1.5 Lug Nuts--mishimoto Lifetime Warranty
- TechSpec Weight (Ounces): N/a
-
Features:
- Designed specifically to allow use of hubcentric wheel spacers on both front and rear axles
- Mishimoto Lifetime Warranty
- Direct fit for 2012+ RAM 6.7L Cummins
- Also fit vehicles with 8x165.1 bolt pattern, M14x1.5 studs, and 121.3 mm center bore
- Forged 6061-T6 aluminum construction provides the perfect blend of lightness and strength
- Hub-centric design provides a direct extension of the axle hub, ensuring precise wheel fitment, and smooth, safe driving
- High-strength grade-12.9 steel studs and lug nuts securely mount the spacer and wheel to the hub
- Purchase includes one pair of wheel spacers and all necessary hardware for installation
- Available in multiple bolt-patterns, center bores, and thicknesses
- Durable anodized finish prevents corrosion
- Wheel spacers are a great way to create brake clearance, add track width, prevent tire rub, and provide ideal wheel fitment on your vehicle. Borne Off-Road now offers a complete catalog of wheel spacers for a variety of common thread patterns, center bores, and thicknesses.----Quality material selection, precise engineering, and meticulous manufacturing are critical elements to creating our incredibly robust products, and our wheel spacers are no different. Each spacer is forged from 6061-T6 aluminum. This material offers a perfect blend of strength and lightness, both are extremely vital in this application. Our spacers feature grade-12.9 steel studs and lug nuts, ensuring a safe and secure installation. Borne Off-Road’s hub-centric design provides a direct extension of the axle hub for precise wheel fitment on both front and rear axels, reduced load on the hardware, and ensures safe and smooth driving.----Borne Off-Road wheel spacers feature a black or blue anodized finish to ensure protection against corrosion. Each kit contains two wheel spacers with pre-installed studs and all hardware necessary for installation. As with all our products, this wheel spacer kit includes our signature Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ram 2500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 8 of 8 products
Loading...