Image
Product
Price
- MONOTUBE SHOCK; M9527
- 24.75 in. Extended; 14.54 in. Collapsed; w/0 in. Lift/Drop
- MONOTUBE SHOCK; M9527
- M95 Performance Monotube Shock Absorber
- Product Attributes:
- Collapsed Length: 14.540 In.
- Shock Stroke: N/a
- WARNING CA Proposition 65: Yes
- Extended Length: 24.750 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Ultimate Shock For Light Trucks/Jeeps/SUVs
- Single Tube Design
- High Pressure Nitrogen Gas/Floating Piston Tech.
- Fastest Responding Shock Ever
- Internal Bump Stop
- 180 Deg. Directional Mounting
- Large 46mm Bore
- No Fade Or Lag For Consistent Performance
- Skyjacker M95 Monotube Shock is the ultimate shock absorber for light trucks, Jeeps, and SUVs. This single tube design helps operating temperatures stay cooler under extreme conditions. The high pressure nitrogen gas and floating piston technology combine to create the fastest responding shock ever.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5967 | Rear | 8 Cyl 6.0L | Hybrid | 4WD | 364 |
- FRONT; OE SWAY BAR LK; 6IN. PR
- Lift Height 6 in.; Includes Bushings; Pair
- FRONT;OE SWAY BAR LK;6in. PR
- Sway Bar End Link
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Sway Bar End Link
- Limited Lifetime Warranty
- Skyjackers End Links are custom-engineered to drop your sway bar down to the perfect location. Get maximum anti-roll and sway control for better, safer handling on both smooth streets and rough trails. Built using only hard-wearing 4140H steel and finished with a durable zinc coating to block rust, corrosion, and oxidation. New polyurethane bushings included to replace worn factory rubber. These Skyjacker Sway Bar End Links directly replace your stock end links so installation is simple and fast. Minor drilling may be required on some vehicles.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2012 - GMC Sierra 1500 | Front | Hybrid | 4WD |
- HYDRO SHOCK W/RED BOOT
- 24.75 in. Extended; 14.54 in. Collapsed; w/0 in. Lift/Drop
- HYDRO SHOCK W/RED BOOT
- Hydro Shock Absorber
- Product Attributes:
- Collapsed Length: 14.540 In.
- Shock Stroke: 10.210 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 24.750 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Multi-Stage Velocity Sensitive Valving
- Twin Tube Construction
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Red Polyurethane Bushings
- Includes Red Boot 15 Other Colors Available
- Limited Lifetime Warranty
- Skyjacker(R) Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock' of bumps and suspension loading is actually performed by the springs in the suspension. The shock's real job is controlling the energy stored in the springs.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5967 | Rear | 8 Cyl 6.0L | Hybrid | 4WD | 364 |
- NITRO SHOCK W/RED BOOT
- 24.75 in. Extended; 14.54 in. Collapsed; w/0 in. Lift/Drop
- NITRO SHOCK W/RED BOOT
- Nitro Shock Absorber
- Product Attributes:
- Collapsed Length: 14.540 In.
- Shock Stroke: 10.210 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 24.750 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Multi-Stage Velocity Sensitive Valving
- Twin Tube Construction
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Red Polyurethane Bushings
- Includes Red Boot 15 Other Colors Available
- Limited Lifetime Warranty
- Skyjacker(R) Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock' of bumps and suspension loading is actually performed by the springs in the suspension. The shock's real job is controlling the energy stored in the springs.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5967 | Rear | 8 Cyl 6.0L | Hybrid | 4WD | 364 |
- BLACK MAX SHOCK ABSORBER
- w/Black Boot; 24.75 in. Extended; 14.54 in. Collapsed; w/0 in. Lift/Drop
- BLACK MAX SHOCK W/BLK BOOT
- Black MAX Shock Absorber
- Product Attributes:
- Collapsed Length: 14.540 In.
- Shock Stroke: 10.210 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 24.750 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Advanced Foam-Cell Technology
- Vehicle Specific Multi-Stage Valving
- Increased Fluid Capacity for MAX Heat Dissipation
- 360 Degree Arc Welded End Mounts
- 180 Degree Directional Mounting
- Twin Tube Construction
- Chrome Plated Shaft
- Sintered Iron Piston
- Limited Lifetime Warranty
- Black MAX twin tube shock absorbers have increased fluid capacity and utilize foam-cell technology. When the shock is working hard and gets hot, the foam-cell insert compresses to compensate for oil expansion which maintains consistent MAX performance throughout the operating temperature range of the shock. The foam-cell design also eliminates air inside the shock which allows for mounting in any direction. Arc-welded end mounts and select specific valving give this shock absorber MAX value.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5967 | Rear | 8 Cyl 6.0L | Hybrid | 4WD | 364 |
- REAR SPRG 5IN.; 99-15 1500 4WD
- Lift Height 5 in.; Single
- REAR SPRG 5in.;99-18 1500 4WD
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5967 | Rear | 8 Cyl 6.0L | Hybrid | 4WD | 364 |
- MONOTUBE SHOCK; M9536
- 29.83 in. Extended; 17.32 in. Collapsed; w/4 - 6 in. Lift
- MONOTUBE SHOCK; M9536
- M95 Performance Monotube Shock Absorber
- Product Attributes:
- Collapsed Length: 17.320 In.
- Shock Stroke: N/a
- WARNING CA Proposition 65: Yes
- Extended Length: 29.830 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Ultimate Shock For Light Trucks/Jeeps/SUVs
- Single Tube Design
- High Pressure Nitrogen Gas/Floating Piston Tech.
- Fastest Responding Shock Ever
- Internal Bump Stop
- 180 Deg. Directional Mounting
- Large 46mm Bore
- No Fade Or Lag For Consistent Performance
- Skyjacker M95 Monotube Shock is the ultimate shock absorber for light trucks, Jeeps, and SUVs. This single tube design helps operating temperatures stay cooler under extreme conditions. The high pressure nitrogen gas and floating piston technology combine to create the fastest responding shock ever.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5967 | Rear | 8 Cyl 6.0L | Hybrid | 4WD | 364 |
- ADD-A-LEAFS; RR 99-06 1/2TON
- Lift Height 1.5 in.; w/Tie Bolts; Pair
- ADD-A-LEAFS;RR 99-20 1500
- Softride Add-A-Leaf
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) Add-a-leafs use only American steel and are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the leaf. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the leaf. The Skyjacker(R) add-a-leafs are pre-drilled for the center pin. Pin location varies with each application. Most have long tapered ends for a progressive affect and ride comfort.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5967 | Rear | 8 Cyl 6.0L | Hybrid | 4WD | 364 |
- 3.5 in. Suspension Lift Kit With ADX 2.0 Remote Reservoir Shocks.
- 3.5 in. Lift; w/ADX 2.0 Remote Reservoir Shocks
- 07> GM 1500 3.5in. W/CAST STL
- Suspension Lift Kit w/Shock
- Product Attributes:
- Lift/Drop Height: 3.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- ADX 2.0 Shocks React Quicker To Improve Handling And Stability
- Heavy Duty DOM Steel Gusseted Tubular Upper Control Arms
- Built-In Camber Correction And Optimized Ball Joint Angles
- UCalifornia Pressed-in HD OEM Grade Greasable Ball Joints
- UCalifornia Pressed-in OEM Style Steel Encased Rubber Bushings
- Diff Spacers Lower And Correct CV And Driveshaft Angles
- Prevents CV Axle Overextension Within The OEM Tolerances
- Forged Torsion Bar Keys Provide Reinforced Strength
- Properly Indexed Keys Relieve OEM Component Strains
- Rear Block And U-bolt Kit Delivers A More Level Stance
- Specifically Engineered To Maintain Proper Suspension Geometry
- Suspension Upgrade With On And Off-Road Performance
- Raise your pickup's altitude to a bigger, bolder attitude. Raising the suspension to run 33- in. tires will add more ground clearance. Skyjacker's Replacement Upper Control Arm (UCA) kit goes beyond expectations to elevate your performance level.Skyjacker's replacement UCAs include built-in caster and camber correction for improved handling. A welded gusset plate stiffens the arm and bushing eyelets into one of rigidity and strength. CNC machined bushing eyelets and ball joint cups ensure precise fitment.The steel encased OEM style rubber bushings deliver a quiet consistent controlled stability and smooth riding comfort. The greasable ball joint's full induction ball design, low friction bearing technology adds longevity and increased strength. Comes preassembled and ready to install with a durable powder coat finish. Retain your front GM OEM tuned performance struts by utilizing 1-piece top mount strut spacers. This system functions perfectly allowing the CV axles to operate within limits of new UCalifornia and OEM lower control arms. Retain your front GM OEM tuned performance struts by utilizing 1-piece top mount strut spacers. One-piece top mount strut spacers integrate smoothly with the factory suspension geometry. No need to disassemble OEM Struts for install. This system functions perfectly allowing the CV axles to operate within limits of new UCalifornia and OEM lower control arms. Four (4) separate differential spacers securely reposition \ correct CV and driveshaft angles. A rugged replacement skid plate protects the differential.A 2- in. rear block and u-bolt kit delivers a more level stance. Complete with high-grade mounting hardware. Aligns to OEM factory specifications.Shocks are a key link in-between the chassis and the moving parts of your suspension. Skyjacker's ADX 2.0 Adventure Series Remote Reservoir Aluminum Monotube Rear Shocks deliver modern technology in the design with an innovative off-road race-inspired full-displaced valving system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5328 | 8 Cyl 5.3L | XFE | 325 |
- 3.5 in. Component Box With Upper Control Arms.
- 3.5 in. Lift; w/Upper Control Arms; For PN[C7350]
- 07> GM 1500 3.5in. W/CAST STL
- Component Box
- Product Attributes:
- Lift/Drop Height: 3.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Heavy Duty DOM Steel Gusseted Tubular Upper Control Arms
- Built-In Camber Correction And Optimized Ball Joint Angles
- UCalifornia Pressed-in HD OEM Grade Greasable Ball Joints
- UCalifornia Pressed-in OEM Style Steel Encased Rubber Bushings
- Diff Spacers Lower And Correct CV And Driveshaft Angles
- Prevents CV Axle Overextension Within The OEM Tolerances
- Forged Torsion Bar Keys Provide Reinforced Strength
- Properly Indexed Keys Relieve OEM Component Strains
- Rear Block And U-bolt Kit Delivers A More Level Stance
- Specifically Engineered To Maintain Proper Suspension Geometry
- Suspension Upgrade With On And Off-Road Performance
- Aggressive Look/Unparalleled Performance/Impressive Ride
- All the bracketry, components and hardware are contained in this box. Skyjacker fabricated the Replacement Upper Control Arm (UCA) out of high weld strength, thick walled DOM steel tubing to withstand extreme amounts of stress and loads. For additional rigidity and strength, a welded gusset plate stiffens the arm and bushing eyelets into one. CNC machined bushing eyelets and ball joint cups ensure precise fitment. Skilled technicians assemble Skyjacker's exacting CNC laser cutting, bending and machining procedures to our calculated engineering specifications.The steel encased OEM style rubber bushings deliver a quiet consistent controlled stability and smooth riding comfort. The greasable ball joint's full induction ball design, low friction bearing technology and other technical performance characteristics add longevity and increased strength. Engineered with built-in camber correction for improved handling, this system integrates smoothly and functions perfectly allowing the CV axles to operate within limits of new UCalifornia and OEM lower control arms. The replacement UCalifornia comes completely preassembled and ready to install with a durable powder coat finish.One-piece top mount strut spacers integrate smoothly with the factory suspension geometry. No need to disassemble OEM Struts for install. The strong tab-and-slot interlocked design of the 1-piece top mount strut spacers delivers a strong, long lasting product. Precise CNC laser cut and precision formed in CNC press break, there is expert workmanship in every component of the kit. One-piece top mount strut spacers are powder coated to provide an extremely durable protective barrier to prevent corrosion.Four (4) separate differential spacers securely reposition \ correct CV and driveshaft angles. A 2- in. rear block and u-bolt kit delivers a more level stance. Aligns to OEM factory specifications. Works with Electric Power Assisted Steering (EPAS) system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5328 | 8 Cyl 5.3L | XFE | 325 |
Showing 1 - 10 of 44 products
Loading...