Image
Product
Price
- Universal Joint
- with 1 Piece Rear Drive Shaft with 4.188in Outside Snap Ring Dimension 1 Piece Driveshaft 1.188in Bearing Cap Diameter Non-Greasable
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 4.188
- Snap Ring (2): 4.188
- Length B (mm): 106.4
- SR(2)Brng Cap to Brng Cap(OSR): 4.188
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 4.188
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1410/spl36
- Bearing Cap Diameter B (mm): 1.188
- Length A (In): 4.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 106.4
- SR(1)Brng Cap to Brng Cap(OSR): 4.188
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Dodge Ram 2500 Van | V | - | Rear Driveshaft at Rear Axle | 8 Cyl 5.9L | 360 |
- Universal Joint
- with 1 Piece Rear Drive Shaft with 4.188in Outside Snap Ring Dimension 1 Piece Driveshaft 1.188in Bearing Cap Diameter Non-Greasable
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 4.188
- Snap Ring (2): 4.188
- Length B (mm): 106.4
- SR(2)Brng Cap to Brng Cap(OSR): 4.188
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 4.188
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1410/spl36
- Bearing Cap Diameter B (mm): 1.188
- Length A (In): 4.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 106.4
- SR(1)Brng Cap to Brng Cap(OSR): 4.188
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-160X, 2-0054, 2-0054G, 2-0054P, 2-0801, 295, 330, 45U0300, 45U0304, 45U4052, 471, 5-160X, UJ295, UJ330
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Dodge Ram 2500 Van | V | - | Rear Driveshaft at Transmission | 8 Cyl 5.9L | 360 |
- Differential Drive Pinion Gear Nut
- with Dana 70 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Thread Size: .875-14
- Self Locking: Y
- Shaft Not Torque (Ft/Lbs): 47 Nm/20 To 35 Lbs
- Hex: 32.815mm
- Flange Diameter: 32.515mm
- Thickness: 15.875mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Dodge Ram 2500 Van | Rear Differential |
- PINION NUT WASHER
- with Dana 70 Axle
- FSGR
- Product Attributes:
- Inner Diameter: 0.898
- Outer Diameter: 1.500
- Thickness: 0.119
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Dodge Ram 2500 Van | Rear Differential |
- Axle Shaft Bolt - Stud
- with Dana 70 Axle
- FSGR
- Product Attributes:
- Thread Size: .437-14
- Self Locking: Y
- Head Style: Hex
- Length Under Head (In): 1.375
- Grade: 8
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Dodge Ram 2500 Van | Rear |
- Spindle Nut
- 1.94in I.D. with 6 Slots with Dana Model 70 Axle
- FSGR
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
5005310-1, DS33732
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Dodge Ram 2500 Van | Rear |
- Axle Shaft Bolt - Stud
- with Dana 70 Axle
- FSGR
- Product Attributes:
- Thread Size: .437-14
- Self Locking: Y
- Head Style: Hex
- Length Under Head (In): 1.375
- Grade: 8
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12389924, 43124, DS43124, DS45720
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Dodge Ram 2500 Van | Rear |
- Differential Drive Pinion Gear Nut
- with Dana 70 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Thread Size: .875-14
- Self Locking: Y
- Shaft Not Torque (Ft/Lbs): 47 Nm/20 To 35 Lbs
- Hex: 32.815mm
- Flange Diameter: 32.515mm
- Thickness: 15.875mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Dodge Ram 2500 Van | Rear Differential |
- Differential Drive Pinion Gear Nut
- with Dana 60 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Thread Size: .875-14
- Self Locking: Y
- Shaft Not Torque (Ft/Lbs): 47 Nm/20 To 35 Lbs
- Hex: 32.815mm
- Flange Diameter: 32.515mm
- Thickness: 15.875mm
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
This Part Fits the Following OEM/Substitute Numbers:
2510524C1, DS30271, SP 30271
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Dodge Ram 2500 Van | Rear Differential |
- PINION NUT WASHER
- with Dana 60 Axle
- FSGR
- Product Attributes:
- Inner Diameter: 0.898
- Outer Diameter: 1.500
- Thickness: 0.119
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
This Part Fits the Following OEM/Substitute Numbers:
2510523C1, AUH224501, DS30275, SP 30275
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Dodge Ram 2500 Van | Rear Differential |
Showing 1 - 10 of 20 products
Loading...