1982 Chevrolet Catalytic Converter Parts


Showing 1 - 10 of 47 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • CARB Executive Order D-193-105; Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • 2.25in. Universal California Pre-OBDII Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Body Width: 6.375
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: California / Carb Compliant
    • Inlet Attachment: Weld-on
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Substrate: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet S10 L - 4 Cyl 1.9L 119

Magnaflow
  • Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Weld-on
    • Inlet Orientation: Straight
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet Citation L 2474 4 Cyl 2.5L 151

Magnaflow
  • Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.50in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.5
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet C20 V - 8 Cyl 5.0L 305

Magnaflow
  • Universal Catalytic Converter - 2.5in.
  • CARB Executive Order D-193-105; Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.5in.
  • 2.50in. Universal California Pre-OBDII Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.5
    • Body Width: 6.375
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: California / Carb Compliant
    • Inlet Attachment: Weld-on
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Substrate: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet C20 L - 6 Cyl 4.1L 250

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: No
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: No
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 21.5
    • Body Type: Clam-shell
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Clamp-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23419 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1982-1993 Chevrolet S10, 1982-1990 GMC S15, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet S10 V - 6 Cyl 2.8L 173

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 1
    • Inlet Gasket Included: No
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Grade Type: Regular
    • Hangers Included: Yes
    • Heat Shield Attached: No
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 21.75
    • Body Type: Clam-shell
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: Yes
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23439 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1981-1987 Chevrolet Chevette and 1981-1987 Pontiac T1000. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet Chevette L - 4 Cyl 1.6L 98

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 1
    • Inlet Gasket Included: No
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: No
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 22.75
    • Body Type: Clam-shell
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: Yes
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Weld-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23452 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1985-1988 Chevrolet Monte Carlo, 1985-1987 Chevrolet El Camino, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine Engine VIN CID
1982 - Chevrolet Citation V - 6 Cyl 2.8L Z 173

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 1
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: No
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 23.75
    • Body Type: Clam-shell
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: Yes
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Weld-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23454 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1982-1985 Chevrolet Celebrity, 1982-1985 Oldsmobile Cutlass Ciera, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet Celebrity L 2474 4 Cyl 2.5L 151

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: Yes
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 17
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23652 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1981-1995 Isuzu Pickup, 1975-1982 Chevrolet LUV, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

This Part Fits the Following OEM/Substitute Numbers:
8-25143-676-0

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet LUV L - 4 Cyl 1.8L 111

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 1
    • Inlet Gasket Included: No
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 22.625
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Clamp-on
    • Air Tube Adaptable: Yes
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93418 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1978-1983 Chevrolet Malibu, 1978-1983 Chevrolet El Camino, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1982 - Chevrolet Malibu V 3800 6 Cyl 3.8L 231
Showing 1 - 10 of 47 products

Loading...